합성과 동시에 소결이 이루어지는 HPCS법을 이용하여 TiB₂-W 복합체를 제조하여 이 복합체의 미세구조 및 기계적 물성에 대하여 연구하였다. 이 연구 결과, 텅스텐의 함량증가에 따라 삼성분 붕화 화합물인 TiWB₂의 상이 증가하였으며, 이 상의 증가에 따라 기계적 물성이 향상되었다. 60MPa의 압력과 1300℃, 3000A에서 소결한 TiB₂-30vol%...
합성과 동시에 소결이 이루어지는 HPCS법을 이용하여 TiB₂-W 복합체를 제조하여 이 복합체의 미세구조 및 기계적 물성에 대하여 연구하였다. 이 연구 결과, 텅스텐의 함량증가에 따라 삼성분 붕화 화합물인 TiWB₂의 상이 증가하였으며, 이 상의 증가에 따라 기계적 물성이 향상되었다. 60MPa의 압력과 1300℃, 3000A에서 소결한 TiB₂-30vol%W 복합체에서 상대밀도, 강도, 경도 값은 각각 97.2%, 411.5MPa, 22.36GPa로 가장 우수한 물성을 얻을 수 있었다.
합성과 동시에 소결이 이루어지는 HPCS법을 이용하여 TiB₂-W 복합체를 제조하여 이 복합체의 미세구조 및 기계적 물성에 대하여 연구하였다. 이 연구 결과, 텅스텐의 함량증가에 따라 삼성분 붕화 화합물인 TiWB₂의 상이 증가하였으며, 이 상의 증가에 따라 기계적 물성이 향상되었다. 60MPa의 압력과 1300℃, 3000A에서 소결한 TiB₂-30vol%W 복합체에서 상대밀도, 강도, 경도 값은 각각 97.2%, 411.5MPa, 22.36GPa로 가장 우수한 물성을 얻을 수 있었다.
The microstructure and mechanical properties of TiB₂-W composites which were prepared by HPCS method, known as a novel process with simultaneous synthesis and sintering were investigated. With increasing tungsten contents, the formation of a ternary boride compound, TiWB₂, and the improvement of mec...
The microstructure and mechanical properties of TiB₂-W composites which were prepared by HPCS method, known as a novel process with simultaneous synthesis and sintering were investigated. With increasing tungsten contents, the formation of a ternary boride compound, TiWB₂, and the improvement of mechanical properties increased with amount of TiWB₂, TiB₂ composite with 30vol%W had the highest values in the physical properties. The relative density, flexural strength and hardness of TiB₂-30vol%W composite sintered at 1300℃, 3000A under the pressure of 60MPa were 97.2%, 411.5MPa and 22.36GPa, respectively.
The microstructure and mechanical properties of TiB₂-W composites which were prepared by HPCS method, known as a novel process with simultaneous synthesis and sintering were investigated. With increasing tungsten contents, the formation of a ternary boride compound, TiWB₂, and the improvement of mechanical properties increased with amount of TiWB₂, TiB₂ composite with 30vol%W had the highest values in the physical properties. The relative density, flexural strength and hardness of TiB₂-30vol%W composite sintered at 1300℃, 3000A under the pressure of 60MPa were 97.2%, 411.5MPa and 22.36GPa, respectively.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.