핵제의 종류와 함량 및 몰드온도가 폴리페닐렌설파이드/유리섬유 복합재료의 결정화 거동과 기계적 물성에 미치는 영향 The effect of nucleating agent and mold temperature on the crystallization and mechanical behavior of poly(phenylene sulfide)/glass fiber composites원문보기
폴리페닐렌설파이드(PPS)/유리섬유 복합재료에 다양한 핵제를 함유시켜 결정화 거동에 대하여 고찰하였으며 아울러 함유된 핵제들이 PPS/유리섬유 복합재료에 미치는 기계적 성질에 대한 영향과 이에따른 모폴로지에 대하여 관찰하였다. 핵제로써 탈크(talc), 알루미늄옥사이드(Al_2O_3), 실리콘다이옥사이드(SiO_2)를 PPS/유리섬유 복합재료에 사용하였으며 핵제들의 함량은 각각 0, 0.3, 0.5, 1 그리고 2%로 하였다. ...
폴리페닐렌설파이드(PPS)/유리섬유 복합재료에 다양한 핵제를 함유시켜 결정화 거동에 대하여 고찰하였으며 아울러 함유된 핵제들이 PPS/유리섬유 복합재료에 미치는 기계적 성질에 대한 영향과 이에따른 모폴로지에 대하여 관찰하였다. 핵제로써 탈크(talc), 알루미늄옥사이드(Al_2O_3), 실리콘다이옥사이드(SiO_2)를 PPS/유리섬유 복합재료에 사용하였으며 핵제들의 함량은 각각 0, 0.3, 0.5, 1 그리고 2%로 하였다. 결정화도 관찰 결과 PPS/유리섬유 복합재료의 결정화도는 탈크의 함유량에 비례하여 증가하는 것을 관찰하였으나, 알루미늄옥사이드와 실리콘다이옥사이드는 PPS/유리섬유 복합재료의 결정화도 변화에 거의 영향을 미치지 못하였다. 또한 탈크가 함유된 PPS/유리섬유 복합재료의 경우 탈크의 함유랑 증가와 몰드온도의 저하에 따른 기계적 물성의 저하는 관찰되지 않았던 반면에 알루미늄옥사이드와 실리콘다이옥사이드가 함유된 경우에는 기계적 물성이 감소함을 관찰할 수 있었다.
폴리페닐렌설파이드(PPS)/유리섬유 복합재료에 다양한 핵제를 함유시켜 결정화 거동에 대하여 고찰하였으며 아울러 함유된 핵제들이 PPS/유리섬유 복합재료에 미치는 기계적 성질에 대한 영향과 이에따른 모폴로지에 대하여 관찰하였다. 핵제로써 탈크(talc), 알루미늄옥사이드(Al_2O_3), 실리콘다이옥사이드(SiO_2)를 PPS/유리섬유 복합재료에 사용하였으며 핵제들의 함량은 각각 0, 0.3, 0.5, 1 그리고 2%로 하였다. 결정화도 관찰 결과 PPS/유리섬유 복합재료의 결정화도는 탈크의 함유량에 비례하여 증가하는 것을 관찰하였으나, 알루미늄옥사이드와 실리콘다이옥사이드는 PPS/유리섬유 복합재료의 결정화도 변화에 거의 영향을 미치지 못하였다. 또한 탈크가 함유된 PPS/유리섬유 복합재료의 경우 탈크의 함유랑 증가와 몰드온도의 저하에 따른 기계적 물성의 저하는 관찰되지 않았던 반면에 알루미늄옥사이드와 실리콘다이옥사이드가 함유된 경우에는 기계적 물성이 감소함을 관찰할 수 있었다.
The crystallization behavior of poly(phenylene sulfide)(PPS)/glass fiber composite was studied using various nucleating agents. Also, the effect of various nucleating agents on the mechanical properties of PPS/glass fiber composites and their morphologies were investigated. Talc, aluminium oxide(Al_...
The crystallization behavior of poly(phenylene sulfide)(PPS)/glass fiber composite was studied using various nucleating agents. Also, the effect of various nucleating agents on the mechanical properties of PPS/glass fiber composites and their morphologies were investigated. Talc, aluminium oxide(Al_2O_3) and silicon dioxide(SiO_2) were used as a nucleating agent and incorporated into the PPS/glass fiber composites. Nucleating agent content was set to 0, 0.3, 0.5, 1 and 2%, respectively. The degree of crystallinity increased with increasing talc content, however, in the case of Al_2O_3 and SiO_2, this effect was negligible. Severe decrease in mechanical properties of PPS/glass fiber composite due to nucleating agents and mold temperature was not detected in the case of PPS/glass fiber composite. However, in the case of Al_2O_3 and SiO_2, a decrease in mechanical properties with increasing content was shown.
The crystallization behavior of poly(phenylene sulfide)(PPS)/glass fiber composite was studied using various nucleating agents. Also, the effect of various nucleating agents on the mechanical properties of PPS/glass fiber composites and their morphologies were investigated. Talc, aluminium oxide(Al_2O_3) and silicon dioxide(SiO_2) were used as a nucleating agent and incorporated into the PPS/glass fiber composites. Nucleating agent content was set to 0, 0.3, 0.5, 1 and 2%, respectively. The degree of crystallinity increased with increasing talc content, however, in the case of Al_2O_3 and SiO_2, this effect was negligible. Severe decrease in mechanical properties of PPS/glass fiber composite due to nucleating agents and mold temperature was not detected in the case of PPS/glass fiber composite. However, in the case of Al_2O_3 and SiO_2, a decrease in mechanical properties with increasing content was shown.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.