하이드록시아파타이트/고분자 복합체의 제조 및 중금속 제거 특성 장 석 현 Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology 요 약 본 연구는 하이드록시아파타이트를 실질적으로 사용하기위해, 폴리우레탄과 폴리아크릴아미드를 바인딩 재료로 이용하여 복합체를 제조하고, 제조된 복합체의 중금속 이온 제거 특성을 조사하는 것이다. 하이드록시아파타이트/폴리우레탄 복합체의 ...
하이드록시아파타이트/고분자 복합체의 제조 및 중금속 제거 특성 장 석 현 Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology 요 약 본 연구는 하이드록시아파타이트를 실질적으로 사용하기위해, 폴리우레탄과 폴리아크릴아미드를 바인딩 재료로 이용하여 복합체를 제조하고, 제조된 복합체의 중금속 이온 제거 특성을 조사하는 것이다. 하이드록시아파타이트/폴리우레탄 복합체의 고분자 바인더로 친수성 폴리우레탄인 Hypol3000을 사용하였다. 제조된 하이드록시아파타이트/폴리우레탄 복합 폼은 납 이온과 수용액의 경로를 제공할 수 있는 열린 기공 구조를 보였다. 하이드록시아파타이트/폴리아크릴아미드 복합체는 하이드록시아파타이트 현탁액에 폴리아크릴아미드를 직접 중합하여 제조하였다. 하이드록시아파타이트/폴리우레탄 복합체와 하이드록시아파타이트/폴리아크릴아미드 복합체의 납 이온 제거 특성을 다양한 납 이온의 농도와 pH 에서 조사하였다. 하이드록시아파타이트 복합체의 제거 용량은 하이드록시아파타이트의 함량이 증가할수록 납 이온의 제거 사이트가 증가하기 때문에 납 이온의 제거량이 증가하였다. 여러 pH 에서 납 이온의 제거 용량은 실험 오차 내에서 거의 비슷하였지만, 납 이온의 제거 메커니즘은 꽤 달랐다. 하이드록시아파타이트 복합체의 납 이온 평형 제거는 랭뮤어 모델에 잘 모사 되었다. 하이드록시아파타이트가 50 wt% 포함된 하이드록시아파타이트/폴리우레탄 복합 폼의 최대 흡착량은 150 mg/g, 하이드록시아파타이트가 30 wt%, 50wt%, 70 wt% 포함된 하이드록시아파타이트/폴리아크릴아미드 복합 겔의 최대 흡착량은 각각 123, 178, 209 mg/g 임을 알 수 있었다.
하이드록시아파타이트/고분자 복합체의 제조 및 중금속 제거 특성 장 석 현 Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology 요 약 본 연구는 하이드록시아파타이트를 실질적으로 사용하기위해, 폴리우레탄과 폴리아크릴아미드를 바인딩 재료로 이용하여 복합체를 제조하고, 제조된 복합체의 중금속 이온 제거 특성을 조사하는 것이다. 하이드록시아파타이트/폴리우레탄 복합체의 고분자 바인더로 친수성 폴리우레탄인 Hypol3000을 사용하였다. 제조된 하이드록시아파타이트/폴리우레탄 복합 폼은 납 이온과 수용액의 경로를 제공할 수 있는 열린 기공 구조를 보였다. 하이드록시아파타이트/폴리아크릴아미드 복합체는 하이드록시아파타이트 현탁액에 폴리아크릴아미드를 직접 중합하여 제조하였다. 하이드록시아파타이트/폴리우레탄 복합체와 하이드록시아파타이트/폴리아크릴아미드 복합체의 납 이온 제거 특성을 다양한 납 이온의 농도와 pH 에서 조사하였다. 하이드록시아파타이트 복합체의 제거 용량은 하이드록시아파타이트의 함량이 증가할수록 납 이온의 제거 사이트가 증가하기 때문에 납 이온의 제거량이 증가하였다. 여러 pH 에서 납 이온의 제거 용량은 실험 오차 내에서 거의 비슷하였지만, 납 이온의 제거 메커니즘은 꽤 달랐다. 하이드록시아파타이트 복합체의 납 이온 평형 제거는 랭뮤어 모델에 잘 모사 되었다. 하이드록시아파타이트가 50 wt% 포함된 하이드록시아파타이트/폴리우레탄 복합 폼의 최대 흡착량은 150 mg/g, 하이드록시아파타이트가 30 wt%, 50wt%, 70 wt% 포함된 하이드록시아파타이트/폴리아크릴아미드 복합 겔의 최대 흡착량은 각각 123, 178, 209 mg/g 임을 알 수 있었다.
Preparation and Heavy Metal Removal Properties of Hydroxyapatite/Polymer Composites Suk Hyun Jang Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology Abstract In this study, polyurethane(PU) and polyacrylamide(PAAm) were used as a binding materials f...
Preparation and Heavy Metal Removal Properties of Hydroxyapatite/Polymer Composites Suk Hyun Jang Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology Abstract In this study, polyurethane(PU) and polyacrylamide(PAAm) were used as a binding materials for preparation of composite, hydroxyapatite(HAp) to enable their practical use, and to investigate the removal properties of heavy metal ion from aqueous solution using the composites. The polymer binder of HAp/PU composite used was a conventional hydrophilic polyurethane(Hypol 3000). HAp/PU composite foams prepared exhibited well-develop open pore structures which provide paths for the aqueous solution and adsorption Pb2+ ion. The HAp/PAAm composites were prepared by direct free radical polymerization of polyacrylamide in suspension of HAp. The adsorptive features of HAp/PU and HAp/PAAm composites were investigated their removal ability of Pb2+ ion from aqueous solution with a variety of initial Pb2+ ion concentration and pH values. The removal capacity of the HAp/PU and HAp/PAAm composites increased with increasing the HAp content due to the increased removal sites for Pb2+ ion. The removal mechanism of Pb2+ ion was very sensitive to the pH value in aqueous solution, although the removed amount of Pb2+ ion at different pH value was nearly same within the experimental error. However, the removal mechanism of Pb2+ ion was quite dependent on the pH value. The equilibrium removal process of Pb2+ ion by the HAp/PU and HAp/PAAm composites at pH 5 was described well with the Langmuir isotherm model. The maximum adsorption capacity of the HAp/PU composite foam with 50 wt% HAp content was found to be 150 mg/g, and HAp/PAAm composite gels with 30 wt%, 50 wt%, 70 wt% HAp contents were found to be 123, 178 and 209 mg/g, respectively.
Preparation and Heavy Metal Removal Properties of Hydroxyapatite/Polymer Composites Suk Hyun Jang Department of Polymer Science and Engineering, Graduate School Kumoh National Institute of Technology Abstract In this study, polyurethane(PU) and polyacrylamide(PAAm) were used as a binding materials for preparation of composite, hydroxyapatite(HAp) to enable their practical use, and to investigate the removal properties of heavy metal ion from aqueous solution using the composites. The polymer binder of HAp/PU composite used was a conventional hydrophilic polyurethane(Hypol 3000). HAp/PU composite foams prepared exhibited well-develop open pore structures which provide paths for the aqueous solution and adsorption Pb2+ ion. The HAp/PAAm composites were prepared by direct free radical polymerization of polyacrylamide in suspension of HAp. The adsorptive features of HAp/PU and HAp/PAAm composites were investigated their removal ability of Pb2+ ion from aqueous solution with a variety of initial Pb2+ ion concentration and pH values. The removal capacity of the HAp/PU and HAp/PAAm composites increased with increasing the HAp content due to the increased removal sites for Pb2+ ion. The removal mechanism of Pb2+ ion was very sensitive to the pH value in aqueous solution, although the removed amount of Pb2+ ion at different pH value was nearly same within the experimental error. However, the removal mechanism of Pb2+ ion was quite dependent on the pH value. The equilibrium removal process of Pb2+ ion by the HAp/PU and HAp/PAAm composites at pH 5 was described well with the Langmuir isotherm model. The maximum adsorption capacity of the HAp/PU composite foam with 50 wt% HAp content was found to be 150 mg/g, and HAp/PAAm composite gels with 30 wt%, 50 wt%, 70 wt% HAp contents were found to be 123, 178 and 209 mg/g, respectively.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.