본 논문에서는 저출력에서의 효율을 높이기 위한 두 가지 전력 증폭기 구조와 각각의 구조에 필요한 전력 분배기를 제안한다. 저출력에서의 효율을 높이게 되면, 무선 통신용 선형 전력 증폭기의 평균 효율을 높일 수 있다. 제안한 전력 분배기는 출력의 크기에 따라 고출력 모드와 저출력 모드로 동작한다. 각 모드에서 신호의 경로가 재구성되고 임피던스정합도 이루어진다. 이러한 재구성성이 있는 전력 분배기는 /4 결합 선로와 스위치로 구성된다. 처음 제안한 전력 증폭기의 구조에서 사용되는 전력 분배기는 고출력 모드에서 1:3 전력 분배기로 동작하고 저출력 모드에서는 1:0 전력 전송 모드로 동작한다. 제작된 전력 분배기는 중심 주파수 0.9 GHz에서 고출력 모드일 때 두 출력 포트에 ...
본 논문에서는 저출력에서의 효율을 높이기 위한 두 가지 전력 증폭기 구조와 각각의 구조에 필요한 전력 분배기를 제안한다. 저출력에서의 효율을 높이게 되면, 무선 통신용 선형 전력 증폭기의 평균 효율을 높일 수 있다. 제안한 전력 분배기는 출력의 크기에 따라 고출력 모드와 저출력 모드로 동작한다. 각 모드에서 신호의 경로가 재구성되고 임피던스정합도 이루어진다. 이러한 재구성성이 있는 전력 분배기는 /4 결합 선로와 스위치로 구성된다. 처음 제안한 전력 증폭기의 구조에서 사용되는 전력 분배기는 고출력 모드에서 1:3 전력 분배기로 동작하고 저출력 모드에서는 1:0 전력 전송 모드로 동작한다. 제작된 전력 분배기는 중심 주파수 0.9 GHz에서 고출력 모드일 때 두 출력 포트에 삽입 손실( , )이 -6.1 dB와 -1.6 dB였고 반사 손실( )과 격리 특성( )이 -15 dB 이하였다. 저출력 모드일 때 삽입 손실( )이 -0.8 dB였으며 반사 손실( )은 -25 dB 이하였다. 두 번째로 제안하는 전력 증폭기 구조에 사용되는 전력 분배기는 고출력 모드일 때 포트 1과 포트 2를 연결하고 저출력 모드일 때 포트 1과 포트 3을 연결한다. 중심 주파수 0.9 GHz에서 제작된 전력 분배기는 고출력 모드일 때 반사 손실( )과 삽입 손실( )이 각각 -16.5 dB와 -0.8 dB, 저출력 모드일 때 반사 손실( )과 삽입 손실( )은 각각 -16.3 dB와 -0.7 dB였다. 측정 결과를 통해 두 전력 분배기가 각각의 모드에서 신호의 경로가 재구성되며 임피던스 정합이 이루어지는 것을 확인하였다. 따라서, 이 두 전력 분배기를 이용하여 제안한 구조의 전력 증폭기를 구현한다면 평균 효율 개선에 크게 기여할 수 있을 것으로 예상된다
본 논문에서는 저출력에서의 효율을 높이기 위한 두 가지 전력 증폭기 구조와 각각의 구조에 필요한 전력 분배기를 제안한다. 저출력에서의 효율을 높이게 되면, 무선 통신용 선형 전력 증폭기의 평균 효율을 높일 수 있다. 제안한 전력 분배기는 출력의 크기에 따라 고출력 모드와 저출력 모드로 동작한다. 각 모드에서 신호의 경로가 재구성되고 임피던스 정합도 이루어진다. 이러한 재구성성이 있는 전력 분배기는 /4 결합 선로와 스위치로 구성된다. 처음 제안한 전력 증폭기의 구조에서 사용되는 전력 분배기는 고출력 모드에서 1:3 전력 분배기로 동작하고 저출력 모드에서는 1:0 전력 전송 모드로 동작한다. 제작된 전력 분배기는 중심 주파수 0.9 GHz에서 고출력 모드일 때 두 출력 포트에 삽입 손실( , )이 -6.1 dB와 -1.6 dB였고 반사 손실( )과 격리 특성( )이 -15 dB 이하였다. 저출력 모드일 때 삽입 손실( )이 -0.8 dB였으며 반사 손실( )은 -25 dB 이하였다. 두 번째로 제안하는 전력 증폭기 구조에 사용되는 전력 분배기는 고출력 모드일 때 포트 1과 포트 2를 연결하고 저출력 모드일 때 포트 1과 포트 3을 연결한다. 중심 주파수 0.9 GHz에서 제작된 전력 분배기는 고출력 모드일 때 반사 손실( )과 삽입 손실( )이 각각 -16.5 dB와 -0.8 dB, 저출력 모드일 때 반사 손실( )과 삽입 손실( )은 각각 -16.3 dB와 -0.7 dB였다. 측정 결과를 통해 두 전력 분배기가 각각의 모드에서 신호의 경로가 재구성되며 임피던스 정합이 이루어지는 것을 확인하였다. 따라서, 이 두 전력 분배기를 이용하여 제안한 구조의 전력 증폭기를 구현한다면 평균 효율 개선에 크게 기여할 수 있을 것으로 예상된다
In this thesis, we propose two power amplifier configurations which commonly use power dividers which are required in each configuration. In order to enhance average efficiency of linear power amplifiers for wireless communications, it is required to increase efficiency in low output power region. A...
In this thesis, we propose two power amplifier configurations which commonly use power dividers which are required in each configuration. In order to enhance average efficiency of linear power amplifiers for wireless communications, it is required to increase efficiency in low output power region. According to output power, the proposed power dividers operate in two modes, high power mode and low power mode. In each mode, they show good impedance matching and low loss. This result was made possible by employing /4 coupled lines and switches. A power divider used in the first proposed power amplifier configuration operates like a 1:3 power divider in high power mode and 1:0 power transmission mode in low power mode. The fabricated power divider shows the insertion loss( , ) of -6.1 dB and -1.6 dB in output ports. Its return loss( ) and isolation( ) is lower than -15 dB in high power mode. In low power mode, insertion loss( ) is -0.8 dB and return loss is lower( ) than -25 dB. In the second proposed power amplifier configuration, a power divider connects port 1 to port 2 in high power mode and connects port 1 to port 3 in low power mode. The fabricated power divider shows the return loss( ) and insertion loss( ) of -16.5 dB and -0.8 dB, respectively, in low power mode. In high power mode, the measured return loss( ) and insertion loss( ) are -16.3 dB and -0.7 dB, respectively. These results successfully demonstrate the reconfigurability of the proposed power dividers. If the proposed power amplifier configurations using the two power dividers are realized, average efficiency of power amplifiers is enhanced.
In this thesis, we propose two power amplifier configurations which commonly use power dividers which are required in each configuration. In order to enhance average efficiency of linear power amplifiers for wireless communications, it is required to increase efficiency in low output power region. According to output power, the proposed power dividers operate in two modes, high power mode and low power mode. In each mode, they show good impedance matching and low loss. This result was made possible by employing /4 coupled lines and switches. A power divider used in the first proposed power amplifier configuration operates like a 1:3 power divider in high power mode and 1:0 power transmission mode in low power mode. The fabricated power divider shows the insertion loss( , ) of -6.1 dB and -1.6 dB in output ports. Its return loss( ) and isolation( ) is lower than -15 dB in high power mode. In low power mode, insertion loss( ) is -0.8 dB and return loss is lower( ) than -25 dB. In the second proposed power amplifier configuration, a power divider connects port 1 to port 2 in high power mode and connects port 1 to port 3 in low power mode. The fabricated power divider shows the return loss( ) and insertion loss( ) of -16.5 dB and -0.8 dB, respectively, in low power mode. In high power mode, the measured return loss( ) and insertion loss( ) are -16.3 dB and -0.7 dB, respectively. These results successfully demonstrate the reconfigurability of the proposed power dividers. If the proposed power amplifier configurations using the two power dividers are realized, average efficiency of power amplifiers is enhanced.
주제어
#효율 전력 증폭기 전력 분배기 재구성성 efficiency power amplifier power divider reconfigurability
학위논문 정보
저자
김승훈
학위수여기관
광운대학교 대학원
학위구분
국내석사
학과
전자통신공학과
발행연도
2010
총페이지
ix, 48 p.
키워드
효율 전력 증폭기 전력 분배기 재구성성 efficiency power amplifier power divider reconfigurability
※ AI-Helper는 부적절한 답변을 할 수 있습니다.