$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

$MgO-SiO_2$계 자기소지에 미치는 첨가제의 영향

Studies on the Effect for the Addition in the Porcelain Body of $MgO-SiO_2$ System

Abstract

This study has exemined on the effect for the fitting in porcelain body of $MgO-SiO_2$ system. The mixture was made of corresponding in the theoretical composition of enstatite with Kyul Sung talc and sea water magnesia cake. Hyup Jin kaolin as clay minerals to give the mixtue plasticity was added 10% by weight of the mixture. Also feldspar was added 5% by weight of the above mixture. We added limestone in various kinds of 1%-20% by weight of mixture included kaoil and feldspar in order last of all. The mixture was fire at the various temperatures from 12$25^{\circ}C$ to 13$25^{\circ}C$. After we examined closely physcial properties and microstructures we achieved the following results. 1) 5% addition amount of limestone was good for the property of the strength at the full firing temperatures. But 10% and 15% additions were remarkably excellant below 1275$^{\circ}C$ 2)When we considered the apparent bulk density 5% addition was good for the full firing temperature. 3) 5% addition amount of limestone was proved to be the most excellant propeties between 130$0^{\circ}C$ and 13$25^{\circ}C$ when we considered the apparent bulk density and the range of the firing temperature.

참고문헌 (26)

  1. Talc as a body material , C. W. Parmelee;G. H. Baldwin , Trans. Am. Ceram. Soc. / v.15,pp.532-546, 1913
  2. Physical Chemistry of firing Steatite ceramics , R. L. Stone;J. L. Stone , J. Am. Ceram. Soc. / v.26,pp.333-334, 1943
  3. 技報堂 , 窯業工學 Hand book / v.,pp., 1964
  4. Ceramics for decorative purposes , Teruko Tsuji , Japan. PAT 6334 / v.,pp., 1956
  5. Studies on the mechanical properties of porcelain bodies , K. Hamano;E. S. Lee , Jap. Tech. Bul. / v.108,pp.95-111, 1972
  6. A study fo the porcelain body of MgO-SiO₂aystem Ⅱ , E. S. Lee;C. K. Lee , J. Kor. Ceram. Soc. / v.20,pp.243-249, 1983
  7. The preperation of transparent magnesia bodies Ⅱ by sintering , Banerjee M;Budworth D. W. , Trans. J. Brit. Ceram. Soc. / v.71,pp.51-52, 1972
  8. Uber den cinfluB verschiedener zusatze auf die physikalischcn eigenshaften des porzellans , K. Wetzel , Ber. Dent Keram. Gesell. / v.6,pp.23-41, 1925
  9. The effect of potash and soda feldpars in china body , E. Scharamm , J. Am. Ceram. Soc. / v.10,pp.1005-1006, 1927
  10. 透光性多結品 magnesia 質燒の製造法 , 長島秀夫 , Japan. PAT 16245 / v.,pp., 1974
  11. Ceramics の??戰的性質 , 窯協講座小委員會 , 日窯協 / v.,pp., 1979
  12. The factors affecting the mechanical properties of porcelain bodies , K. Hamano;E. S. Lee , J. Jap. Mat. Soc. / v.1V,pp.475-483, 1972
  13. On the vitrification and fired properties of an elctrical porcelain body , B. E. Waye;M. Ashley;B. G. bson;B. Hales;G. James , Trans. Brit. Ceram. Soc. / v.62,pp.421-441, 1963
  14. 透光性多結晶 magnesia 燒結體の製造法 , 佐野資郞 , Japan. PAT 22921 / v.,pp., 1971
  15. Relation of microstructure to translucency of porcelain body , G. Goodman , J. Am. Ceram. Soc. / v.33,pp.66-72, 1950
  16. Talc as an auxiliary flux in plastically formed ceramics , Emerson W. Emrich;Richard C. Hannon , Am. Ceram. Soc. Bull. / v.43,pp.186-190, 1964
  17. Studies on the densification process of Kaolin-Quaitz-Feldspar triaxial porcelain bodies , K. Hamano;E. S. Lee , J. Jap. Ceram. Soc. / v.81,pp.64-76, 1973
  18. Sanitary vitreous China , F. Singer , Trans. Brit. Ceram. Soc. / v.40,pp.119-149, 1941
  19. Studies on the mechanical properties of porcelain bodies , E. S. Lee , J. Kor. Ceram. Soc. / v.11,pp.69-79, 1974
  20. A study of the porcelain body of MgO-SiO₂system , E. S. Lee;C. K. Lee , J. Kor Ceram. Soc. / v.19,pp.139-144, 1982
  21. Forsterite 磁器の諸諸性質に及ぼ寸 Kaolin の影響 , 佐野資郞;石井英一;平非道雄;杉浦正敏 , 日窯協 / v.71,pp.231, 1963
  22. Manufacture of a White procelain body of high translucency and high strength , Nippon Toki , Japan. PAT 233 / v.,pp.440, 1972
  23. Advances in Ceramics related to electronic tube developments , Louis;Nauias , J. Am. Ceram. Soc. / v.37,pp.329, 1954
  24. Unterζuchung uber temperatur-wechselbestandige massen , P. De Groote , La ceramigue / v.37,pp.209-215, 1934
  25. 杉浦正敏;佐野資郞;石非英一;平井道雄 , Influence of excess magnesia on the properties of forsterite porcelain / v.70,pp.71, 1962
  26. Studies on the densification process of Kaolm-Feldspar bodies , E. S. Lee;K. Hamano , J. Jap. Ceram. soc. / v.81,pp.7-16, 1973

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일