Abstract

Conventional manufacturing process for cast iron-babbitt metal composite is complicate and bimetallic bonding by centrifugal casting is also difficult because their melting point is largely different and nonmetallic inclusion exists on outer shell. This study is aiming to simplify multistage process by adding Cu-powder as insert metals during cast iron solidification. The variables on fabrication of composite pipe are mold rotating speed and inner surface temperature of outer metal. The optimum temperature range for fusion bonding between cast iron and Cu-layer was $1100^{\circ}C-1140^{\circ}C$ in case of mold rotating speed was 700rpm. When the inner surface of Cu-layer was at $900^{\circ}C$, the value of interfacial hardness between Cu-layer and babbitt metal were higher than Cu-matrix by forming diffusion layer, interfacial products between Cu-layer and babbitt metal are proved to be $Cu_6Sn_5({\eta})$by XRD.

주제어

#Centrifugal casting   #Cast iron   #Composite pipe   #Mold rotating speed   #Fusion bonding   #Diffusion bonding   #Babbitt metal  

저자의 다른 논문

참고문헌 (0)

1. 이 논문의 참고문헌 없음

이 논문을 인용한 문헌 (0)

1. 이 논문을 인용한 문헌 없음