$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

원료및 제품저장조를 포함하는 병렬 비연속 공정의 최적설계

Optimal design of parallel noncontinuous units with feedstock/product storages

Abstract

This article derives an analytic solution to determine the optimal size of multiple noncontinuous process and storage units. The total cost to be minimized consists of the setup cost of noncontinuous processing units and the inventory holding cost of feedstock/product storages. A novel approach, which is called PSW(Periodic Square Wave) model, is applied to represent the material flow among non-continuous units and storages. PSW model presumes that the material flow between unit and storage is periodic square wave shaped. The resulting optimal unit size has similar characteristics with the classical economic lot sizing model such as EOQ(Economic Order Quantity) or EPQ(Economic Production Quantity) model in a sense that the unit size is determined as the balance between setup and inventory holding cost. However, the influence of inventory holding cost of PSW model is different from that of EOQ/EPQ model. EOQ/EPQ model includes only the product inventory holding cost but PSW model includes all inventory holding costs around the non-continuous unit with proportional contribution. PSW model is suitable for analyzing interlinked process-storage system. The optimal lot size of PSW model is smaller than that of EOQ/EPQ model. This is quitea remarkable result considering that the EOQ/EPQ model has been is widely used since last half century.

저자의 다른 논문

참고문헌 (9)

  1. A. C. Hax;D. Candea , Production and Inventory Management / v.,pp., 1987
  2. An extended EPQ model to relax the constant demand assumption into periodic demand , G. Yi , Internatinal Joural of Management Science / v.1,pp.39-66, 1995
  3. M. S. Peters;K. D. Timmerhaus , Plant design and economics for chemical engineers / v.,pp., 1980
  4. G. V. Reklaitis;A. Ravindran;K. M. Ragsdeil , Engineering Optimization Method and Applications / v.,pp., 1983
  5. Engineering Optimization Method and Intermediate Storage in Noncontinuous Processes , G. Yi , Ph. D. Dissertation (Purdue University, West Lafayette, IN, U. S. A.) / v.,pp., 1992
  6. Model based feedback inventory controller for intermediate storage in batch processes , G. Yi;G. V. Reklaitis , J. Proc. Cont. / v.4,pp.227-237, 1994
  7. Determining storage vessel cost , J. M. Kalis , AIChE Modular Instruction, Series G / v.2,pp.41-48, 1986
  8. Design of multiproduct batch processes with finite intermediate storage , A. K. Modi;I. A. Karimi , Computers and Chemical Engineering / v.13,pp.127-139, 1989
  9. 준비비와 재고비를 고려한 직렬 비연속 공정과 중간 저장조의 최적설계 , 이경범 , 제어 자동화 시스템 공학회논문지 / v.3,pp., 1997

이 논문을 인용한 문헌 (7)

  1. Lee, Gyeong-Beom 1997. "Optimal design of batch-storage serial trains considering setup and inventory holding cost" 제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, 3(4): 398~405 
  2. Kim, Hyung-Min ; Kim, Kyoo-Nyun ; Lee, Gyeong-Beom 2001. "Optimal Design of Batch-Storage Network with Finite Intermediate Storage" 제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, 7(10): 867~873 
  3. 2003. "Optimal Design of Nonsequential Batch-Storage Network" 제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, 9(5): 407~412 
  4. 2004. "Optimal Design Of Multisite Batch-Storage Network under Scenario Based Demand Uncertainty" 제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, 10(6): 537~544 
  5. ; Lee, Euy-Soo ; Lee, In-Beom ; Yi, Gyeong-Beom 2005. "Optimal Design Of Batch-Storage Network with Financial Transactions and Cash Flows" 제어·자동화·시스템공학 논문지 = Journal of control, automation and systems engineering, 11(11): 956~962 
  6. Suh, Kuen-Hack ; Yi, Gyeong-Beom 2010. "Optimal Design of Process-Inventory Network Considering Late Delivery Costs" 제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, 16(5): 476~480 
  7. Yi, Gyeong-Beom ; Suh, Kuen-Hack 2011. "Optimal Design of Process-Inventory Network Considering Exchange Rates and Taxes in Multinational Corporations" 제어·로봇·시스템학회 논문지 = Journal of institute of control, robotics and systems, 17(9): 932~940 

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

이 논문과 연관된 기능

DOI 인용 스타일