$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

A Numerical Study on Mixing Characteristics of the Chemical Injection Tank

Abstract

A numerical study has been peformed to investigate the flow and mixing characteristics of a chemical injection tank in the chemical and volume control system (CVCS) of Yonggwang 5&6 (YGN 5&6). This study was undertaken to provide a basis for modification of the previous design (YGN 3&4) which gave a lot of difficulties in installation and operation of the chemical injection system during the start-up test because it needs a special reciprocating pump with a high actual head. For the tank of length-to-diameter ratios (L/D) of 1,2 and 3, each with and without a baffle inside, calculation results were obtained by solving the unsteady laminar two-dimensional elliptic forms of governing equations for the mass, momentum and species concentration. Finite-difference method was used to obtain discretized equations, and the SIMPLER solution algorithm, which was developed based on the staggered grid control volume, was employed for the calculation procedure. Results showed that the baffle is very effective in enhancing the mixing in the tank and that a baffle should be installed near the tank entrance in order to 110 chemicals into the reactor coolant system (RCS) within the operating time required.

참고문헌 (14)

  1. YGN3&4 Nuclear Steam Supply System Chemistry Manual , CENPD-280, ABB-CE/KAERI / v.,pp., 1994
  2. The Influence of Viscosity and Density Differences on Mixing Times in Stirred Vessels , Bouwmans;H.E.A. van den Akker , I. Chem. E. Symposium / v.121,pp.1-12, 1990
  3. A Mathematical Model of Mixing and Polymerization in a Semibatch Stirred-Tank Reactor , Guray Tosun , AIChE Journal / v.38,pp.425-437, 1992
  4. System Description for Chemical and Volume Control System for YGN3&4 , 10487-FS-SD410, ABB-CE/KAERI / v.,pp., 1989
  5. Hydrodynamics, Mixing and Oxygen Transfer in Liquid-Impelled Loop Reactors , H.M. van Sonsbeek;P. Verlaan;J. Tramper , I. Chem. E. Symposium / v.121,pp.259-268, 1990
  6. S.V. Patankar , Numerical Heat Transfer and Fluid Flow / v.,pp., 1980
  7. Structure of the Stretching Field in Chaotic Cavity Flows , M. Liu;R.L. Peskin;F.J. Muzzio;C.W. Leong , AIChE Journal / v.40,pp.1273-1286, 1994
  8. Mixing Effects in Stirred-Tank Reactors: a Comparison of Models , Rao, D.P.;L.L. Edwards , Chem. Eng. Sci. / v.28,pp.1179-1192, 1973
  9. Variable Density Effects on Axisymmetric Sudden-Expansion Flows , G.J. Yoo;R.M.C. So , Int. J. Heat Mass Transfer / v.32,pp.105-120, 1989
  10. A Calculation Procedure for Two Dimensional Elliptical Situations , S.V. Patankar , Numer. Heat Transfer / v.4,pp.409-425, 1981
  11. Steel Pipe Corrosion under Flow Conditions-I; An Isothermal Correlation for a Mass Transfer Model , B.K. Mahato;S.K. Voora;L.W. Shemilt , Corros. Sci / v.8,pp.173-193, 1968
  12. Calculation of Wall-Mass Transfer Rates in Separated Aqueous Flow Using a Low Reynolds Number k-ε Model , S. Nesic;J Postlethwaite;D.J. Bergstrom , Int. J. Heat Mass Transfer / v.35,pp.1977-1985, 1992
  13. R.B. Bird;W.E. Stewart;E.N. Lightfoot , Transport Phenomena / v.,pp., 1960
  14. The Role of Oxygen Mass Transfer in the Erosion-Corrosion of Slurry Pipelines , J. Postlethwaite;M.H. Dobbin;K. Bergevin , Corrosion / v.42,pp.521-524, 1986

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일