$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Marginal accuracy and fracture strength of Targis/Vectris Crowns prepared with different preparation designs 원문보기

대한치과보철학회지 = The journal of Korean academy of prosthodontics, v.38 no.6, 2000년, pp.791 - 799  

Song, Ho-Yong (Department of Prosthetic Dentistry, College of Dentistry, Kangnung National University) ,  Cho, Lee-Ra (Department of Prosthetic Dentistry, College of Dentistry, Kangnung National University)

Abstract AI-Helper 아이콘AI-Helper

Statement of problem. Targis/Vectris restorations provide excellent esthetics. Marginal accuracy is significantly influenced by the preparation design. There were no studies to examine the effect of preparation design on the marginal discrepancy and fracture strength of Targis / Vectris crowns. Purp...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 26 In addition to aesthetics, the marginal accuracy and fracture strength are one of the most important criteria to ensure clinical sucess. The aim of this study was to evaluate the influence of three different convergence angle on marginal accuracy and fracture strength of FRC/Ceromer crown.
  • /Ceromer crown. The purpose of this study was to examine die fracture strength and marginal adaptation of FRC/Ceromer with different preparation design.

가설 설정

  • 1. The mean marginal gap prior to cementation was in clinically acceptable level. It showed increasing pattern with the convergence angle of preparation.
  • 2. The mean marginal gap increased significantly after cementation. The increasing amount during cementation was the largest in the 6° group.
  • 4. Fracture pattern was two-mode failure. Ceromer crack was followed by adhesive failure between FRC and ceromer layer.
본문요약 정보가 도움이 되었나요?

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로