$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

MgO 및 TiO2가 첨가된 알루미나의 치밀화와 입성장 거동
Densification and Grain Growth Behavior of MgO and TiO2-doped Alumina 원문보기

한국세라믹학회지 = Journal of the Korean Ceramic Society, v.39 no.11 = no.246, 2002년, pp.1083 - 1089  

이정아 (경북대학교 무기재료공학과) ,  김정주 (경북대학교 무기재료공학과)

초록
AI-Helper 아이콘AI-Helper

알루미나 세라믹스에 MgO와 $TiO_2$를 각각 단독으로 첨가했을 때의 치밀화와 소결 거동을 수축률-소결 밀도 관계를 통해 비교 조사하였다. MgO가 첨가되었을 때는 소결 전과정을 통해 입성장은 억제되고 치밀화는 촉진되었으나, $TiO_2$가 첨가되었을 때는 입성장은 촉진된 반면 치밀화는 떨어졌다. 또한 입자 크기, 밀도, 수축률등을 통해 수축률-소결 밀도 관계를 구하여 최대 수축률을 나타내는 밀도값(Density of Maximum Shrinkage Rate:${\rho}$J.S.R)을 조사해 보았다. 이때 최대 수축률을 나타내는 밀도값보다 낮은 밀도를 보이는 영역에서는 치밀화가 입성장보다 우세하게 진행되었으며 최대 수축률을 나타내는 밀도값보다 높은 밀도의 영역에서는 입성장이 보다 우세하게 진행되는 것으로 추정하였다. 이때 최대 수축률을 나타내는 밀도값은 $TiO_2$가 첨가된 알루미나 < 순수 알루미나 < MgO가 첨가된 알루미나의 순서로 높은 값을 보였다.

Abstract AI-Helper 아이콘AI-Helper

Densification and grain growth behavior of MgO and -doped alumina ceramics were investigated. MgO was found to inhibit grain growth and to promote densification, but acted to promote grain growth more than densification. The density which showed the maximum shrin...

주제어

참고문헌 (43)

  1. J.A. Lee and J.J. Kim, 'Sintering Behavior of Bimodal Size distributed Alumina Powder Mixtures,' J. Kor. Ceram. Soc., 36 [7] 718-24 (1999) 

  2. M. P. Harmer and R. J. Brook, 'The Effect of MgO Additions on the Kinetics of Hot Pressure in $Al_2O_3$ ,' J. Mat. Sci., 15 3017-24 (1980) 

  3. R. L. Coble, 'Sintering Alumina: Effect of Atmosphere,' J. Am. Ceram. Soc., 45 [3] 123-27 (1962) 

  4. M. P. Harmer and R. J. Brook, 'Fast firing microstructural Benefits' J. Brit. Ceram. Soc., 80 [5] 147-48 (1981) 

  5. H. Mostaghaci and R. J. Brook, 'Fast firing of Non Stoichiometric $BaTiO_3$ ,' J. Brit. Ceram. Soc., 80 [5] 148-49 (1981) 

  6. M. Harmer, E. W. Roberts and R. J. Brook, 'Rapid Sintering of Pure and Doped $\alpha$ - $Al_2O_3$ ,' Trans. Brit. Ceram. Soc., 78 [1] 22-5 (1979) 

  7. C. A. Bateman, S. J. Bennison and M. P. Harmer, 'Mechanism for the Role of Magnesia in the Sintering of Alumina Containing Small Amount of a Liquid Phase,' J. Am. Ceram. Soc., 72 [7] 1214-44 (1989) 

  8. S. K. Jung, B. C. Kim, S. H. Chang and J. J. Kim, 'Sintering Behaviors of ITO Ceramics with Additions of $TiO_2$ ,' J. Kor. Ceram. Soc.. 35 [4] 347-54 (1998) 

  9. J. I. Jung, B. C. Kim, S. H. Chang and J. J. Kim, 'Effects of Sintering Atmosphere and Dopant Addition on the Densification of $SnO_2$ Ceramics,' J. Kor. Ceram. Soc., 34 [12] 1221-26 (1997) 

  10. H. P. Cahoon and C. J. Christensen, 'Sintering and Grain Growth of Alpha alumina,' J. Am. Ceram. Soc., 39 [10] 337-44 (1956) 

  11. I. B. Cutler, C. Branshaw C. J. Christensen and E. P. Hyatt, 'Sintering of Alumina at Temperatures of $1400^\circ$ C and Below,' J. Am. Ceram. Soc., 40 [4] 134-39 (1957) 

  12. J. R. Keski and I. B. Cutler, 'Initial Sintering of $Mn_xOAl_2O_3$ ,' J. Am. Ceram. Soc., 51 [8] 440-44 (1968) 

  13. J. Zaho and M. P. Harmer, 'Sintering of Ultra high purity Alumina Doped Simultaneously with MgO and FeO,' J. Am. Ceram. Soc., 70 [12] 860-66 (1987) 

  14. W. R. Rao and I. B. Cutler, 'Effect of Iron Oxide on the Sintering Kinetics of $Al_2O_3$ ,' J. Am. Ceram. Soc., 56 [11] 588-93 (1973) 

  15. F. J. T. Lin. L. C. De Jonghe and M. N. Rahaman, 'Initial Coarsening and Microstructural Evolution of Fast-fired and Mgodoped $Al_2O_3$ ,' J. Am. Ceram. Soc., 80 [1] 2891-96 (1997) 

  16. S. J. Bennison and M. P. Harmer, 'A History of the Role of MgO in the Sintering of $\alpha$ - $Al_2O_3$ , pp. 13-49, in Ceramic Transactions, Vol. 7, Sintering of Advanced Ceramics, Ed. by C. A. Handwerker et al., The American Ceramic Society, Inc., Westerville, Ohio, 1990 

  17. S. J. Bennison and M. P. Harmer, 'Grain growth Kinetic for Alumina in the Absence of a Liquid Phase,' J. Am. Ceram. Soc., 68 [1] C-22-C4 (1985) 

  18. S. J. Bennison and M. P. Harmer, 'Effect of MgO Solute on the Kinetics of Grain Growth in $Al_2O_3$ ,' J. Am. Ceram. Soc., 66 [5] C-90-C-2 (1983) 

  19. M. P. Harmer, Use of Solid Solution Additives in Ceramic Processing, pp. 679-96 in Advances in Ceramics, Vol. 10 Structure and Properties of MgO and $Al_2O_3$ Ceramics, Edited by W. D. Kingery, American Ceramic Society, Columbus, OH. 1984 

  20. K. A. Berry and M. P. Harmer, 'Effect of MgO Solute on Microstructure Development in $Al_2O_3$ ,' J. Am. Ceram. Soc., 69 [2] 143-49 (1986) 

  21. M. P. Harmer and R. J. Brook, 'The Effect of MgO Additions on the Kinetics of Hot Pressing in $Al_2O_3$ ,' J. Mater. Sci., 15 3017-24 (1980) 

  22. J. E. Burke, K. W. Lay and S. Prochazka, The Effect of MgO on Mobilities of Grain Boundaries and Pores in Aluminum Oxide,' Mater. Sci. Res., 13 417-25 (1980) 

  23. S. Sumita, 'Influence of Oxide Additives, Firing Temperature and Dispersing Media on Sintered $Al_2O_3$ ,' Nippon Seramikkusu Kyokai Gakujutsu Ronbunshi, 99 [7] 538-44 (1991) 

  24. S. K. Roy and R. L. Coble, 'Solubilities of Magnesia, Titania and Magnesium Titanate in Aluminum Oxide,' J. Am. Ceram. Soc., 51 [1] 1-6 (1968) 

  25. T. Ikegami, K. Kotani and K. Eguchi, 'Some Roles of MgO and $BaTiO_2$ in DensiScation of a Sinterable Alumina,' J. Am. Ceram. Soc., 70 [12] 885-90 (1987) 

  26. N. A. Haroun and D. W. Budworth, 'Effects of Additions of MgO and ZnO and NiO on Grain Growth in Dense Alumina,' Trans. Brit. Ceram. Soc., 69 [2] 73-9 (1970) 

  27. J. E. Burke and S. Prochazka, 'The Effect of MgO on Intragranular Pore Entrappment in Sintered Aluminum Oxide,' Sintering Theory and Practice, Proceeding of the 5th International Round Table Conference on Sintering, Vol. 14, pp. 335-41, Elsevier Scientific Publishing Company, Amster dam, 1982 

  28. J. G. J. Peelen, Influence of MgO on the Evolution of the Microstructure of Alumina, in Sintering and Catalysis, Edited by G. C. Kuczynski, New York and London, Plenum Press, pp. 443-53, 1975 

  29. G. Rossi and J. E. Burke, 'Influence of Additives on the Microstructure of Sintered $Al_2O_3$ ,' J. Am. Ceram. Soc., 56 [12] 654-59 (1973) 

  30. C. A. Bruch, 'Sintering Kinetics for the High Density Alumina Process,' Am. Ceram. Soc. Bull.. 41 [12] 799-806 (1962) 

  31. R. L. Coble, 'Effect of $BaTiO_2$ on Initial Sintering of $Al_2O_3$ ,' J. Am. Ceram. Soc., 55 [2] 114-15 (1971) 

  32. R. D. Bagley, I. B. Cutler and D. L. Johnson, 'Effect of $BaTiO_2$ on Initial Sintering of $Al_2O_3$ ,' J. Am. Ceram. Soc., 53 [3] 136-41 (1970) 

  33. C. A. Handwerker, J. M. Dynys, R. M. Cannon and R. L. Coble, 'Dihedral Angles in Magnesia and Alumina : Distributions from Surface Thermal Grooves,' J. Am. Ceram. Soc., 73 [5] 1371-77 (1990) 

  34. M. F. Ashby, 'A First Report on Sintering Diagram,' Acta. Met., 22 [3] 275-89 (1974) 

  35. R. J. Brook, 'Poregrain Boundary Interactions and Grain Growth,' J. Am. Ceram. Soc., 52 [1] 56-7 (1969) 

  36. M. F. Yan, 'Microstructural Control in the Processing of Electronic Ceramics,' Mater. Sci. and Eng., 48 53-72 (1981) 

  37. R. J. Brook, 'Fabrication Principles for the Production of Ceramics with Superior Mechanical Properties,' Proc. Br. Ceram. Soc., 32 7-24 (1982) 

  38. F. M. A. Carpay, The Effect of Pore Drag on Ceramic Microstructure, in Ceramic Microstructure's 76 pp. 261-75 Ed. by R. M. Fulrath and J. A. Pask, Westview Press, Boulder, Co. (1977) 

  39. E. E. Underwood, 'Quantitative Stereology,' Addison-wes-ley, Reading, MA, 1970 

  40. E. R. Winkler, J. F. Sarver and I. B. Culter, 'Solid Solution of Titanium Dioxide in Aluminium Oxide,' J. Am. Ceram. Soc., 49 [12] 634-37 (1966) 

  41. C. Hwang, Z. Nakagawa and K. Hamano, 'Microstructure and Mechanical Strength of $TiO_2$ -doped $Al_2O_3$ Ceramics Fired in Vacuum Atmosphere,' J. Ceram. Soc. Jpn., 101 [9] 1051-56 (1993) 

  42. T. K. Gupta, 'Possible Correlation Between Density and Grain Size During Sintering,' J. Am. Ceram. Soc., 55 [5] 276-77 (1972) 

  43. F. F. Lange, Approach to Reliable Powder Processing, pp.1069-83, in Ceramic Transactions, Vol. 1B, Sintering of Advanced Ceramics, Ed. by C. A. Handwerker et al., The American Ceramic Society, Inc., Westerville, Ohio, 1990 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

이 논문과 함께 이용한 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로