$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

Abstract

The purpose of this study was to investigate the abrasion resistance and surface roughness of conventional dental stones and improved dental stones and newly developed dental stones. Materials included in this study were several dental stones and newly developed dental stone; 2 type III. 6 type IV (including newly developed dental stone). 1 type V Ten specimens for each material, total ninety specimens were made. Each specimen was subjected to 50 complete cycle abrasion under constant load 0.42N at speed or 6mm per sec. The depth after abrasion test was measured for each specimen. Surface roughness before and after abrasion test was compared. The results were as follows ; 1. The resin containing die materials such as Tuff Rock and Resin Rock had superior abrasion resistance. 2. Type IV, V dental stone exhibited greater abrasion resistance than Type III dental stone. 3. The results or the surface roughness showed similar pattern with the abrasion resistance.

참고문헌 (21)

  1. Hardison JD, Mithell RJ. Mold inversion and abrasion resistance of a type IV stone. Dent Mater 1989:5:66-70 
  2. Moser JB, Stone DG, Willougby GM. Properties of a resin die material. J Prosthet Dent 1975:34:297-304 
  3. Sanad MEE. Combe EC, Grant AA. The Effect of model sealant solutions on the properties of gypsum. J Dent 1980:8: 152-157 
  4. Fan P.L. Powers JM, Reid BC. Surface mechanical properties of stone, resin, and metal dies. JADA 1981:103:408-411 
  5. Williams GJ, Wild S, Bates JF. A Study of some factors affecting the surface properties of dental stones. Br Dent J 1984:156:46-53 
  6. Chaffee HR. Bailey JH. Sherrad DJ. Dimensional accuracy of improved dental stone. epoxy resin die materials Part II : Complete arch form. J Prosthet Dent 1997: 77: 235-238 
  7. Nanami T, Ostlund SG. Surface texture of stone model setting against elastomer impression material. Swed Dent J 1984: 8:251-255. 
  8. Keuter FMS, Davidson CL. Surface roughness of dental stone casts from alginate impression. J Dent 1986:14:23-28 
  9. Nomura GT, Reisbick MH, Preston JD. An investigation of epoxy resin dies. J Prosthet Dent 1980:44:45-50 
  10. Schwedhelm ER. Lepe X. Fracture strength of Type IV and Type V die stone as a function of time. J Prosthet Dent 1997:78:554-559 
  11. Fukui H. Lacy AM, Jenderseb MD. Effectiveness of hardening film on die stone. J Prosthet Dent 1980:44:57-63 
  12. Duke PD, Moore BK, Haug SP, Andres CJ. Study of the physical properties of type IV gypsum, resin-containing and epoxy die materials. J Prosthet Dent 2000:83:466-473 
  13. Vermilyea SG, HYget LF, Wiskoski J. Evaluation of resin die materials. J Prosthet Dent 1979 :42: 304-307 
  14. Toreskog S, Phillips RW, Schnell RJ. Properties of die material : A comparative study. J Prosthet Dent 1996: 16: 119-131 
  15. Paquette JM, Taniguchi T, White SN. Dimensional accuracy of an epoxy resin die material using two setting methods. J Prosthet Dent 2000:83:301-305 
  16. Baily JH. Donovan TE, Preston JD. The dimensional accuracy of improved dental stone, silver plated, and epoxy resin die materials. J Prosthet Dent 1980:59:307-310 
  17. Craig RG. Restorative dental materials. ninth edition. 1993, USA, Mosby 
  18. American Dental Association. Specification No. 25 for dental gypsum products In: Certification program for dental materials. Chicago: American Dental Association: 1990: p.1-14 
  19. Peyton FA, Leibld JP, Ridgley GV. Surface hardness, compressive strength and abrasion resistance of indirect die stone. J Prosthet Dent 1952:2:381-389 
  20. Ragain JC, Grosko ML, Raj M, et al. Detail reproduction. contact angles. and die hardness of elastomeric impression and gypsum die material combinations. Int J Prosthodont 2000:13:214-220 
  21. Sanad MEE, Combe EC, Grant EC. Hardening of model and die materials by epoxy die resin. J Dent 1980:8:158-162 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일