$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"

과학기술 지식인프라 ScienceON

상세검색 다국어 입력
도움말도움말
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

MyON담기
내보내기

Key Technical Challenges for Integrated Sensors in Power Electronics and Motor Drives

KIEE international transactions on electrical machinery and energy conversion systems v.4B no.4 , 2004년, pp.170 - 179  
Lorenz, Robert D. (Co-Director of WEMPEC, Dept. of Mech. Engr. and Dept. of Elect. & Comp. Engr. University of Wisconsin-Madison)
Abstract

The paper presents technical issues which integrated sensors must address to be implemented in the next generation of power electronics and motor drives. The underlying goal of the sensor integration will be to improve reliability of power conversion systems while making the power converter and motor drive become the primary source of diagnostic signals for the application. The paper focuses on design methodologies that will allow this integration to succeed in meeting the technical demands for both reliability and for application level diagnostics.

참고문헌 (31)

  1. S. Chakrabati, T.M. Jahns, and R.D. Lorenz, ‘A Current Control Technique for Induction Machine Drives Using Integrated Pilot Current Sensors in the Low-Side Switches’, IEEE Power Electronics Specialist Conf., Aachen, Germany, June 20-25, 2004, pp. 4453-4459 
  2. Jun He, M.C. Shaw, J.C. Mather, and R.C. Addison Jr, 'Direct measurement and analysis of the timedependent evolution of stress in silicon devices and solder interconnections in power assemblies', IEEE IAS Annual Conf., St. Louis, MO, vol. 2, pp. 1038 – 1045, Oct. 1998 
  3. R.D. Lorenz, ‘Observers and State Filters in Drives and Power Electronics’, Journal of Electrical Engineering, Vol. 2, No. 2, 2002, pp. 4-12 
  4. A.F. Md. Nor and E.W. Hill, ‘Noise power spectral density in single-strip NiFeCo-Cu GMR sensors’, IEEE Trans. on Magnetics, Volume: 38 Issue: 5 Part: 1 , Sep. 2002 
  5. H.N. Shah, Y. Xiao, E. Olson, S-H. Park, W-K Lee, T.P. Chow, R.J. Gutmann, T.M. Jahns, and R.D. Lorenz, ‘Power Electronics Modules for Inverter Applications using Flip-Chip on Flex-Circuit Technology’, IEEE IAS Annual Conf., Seattle, WA, Oct. 3-7, 2004, pp. 1526-1533 
  6. A. Morozumi, K. Yamada, T. Miyasake, and Y. Seki, ‘Reliability of power cycling for IGBT power semiconductor modules,’ IEEE IAS Annual Conf., Chicago, IL, vol. 3, pp. 1912-1918, Oct. 2001 
  7. E.R. Olson and R.D. Lorenz, ‘Integrating Giant Magnetoresistive Current and Thermal Sensors in Power Electronic Modules,’ IEEE APEC Conf., Miami, Feb. 9-13, 2003, pp. 773-777 
  8. E.W. Hill, ‘A Comparison of GMR Multilayer and Spin_Valve Sensors For Vector Field Sensing’, Magnetics Conf., INTERMAG 2000 
  9. S. Chakrabarti, T.M. Jahns, and R.D. Lorenz, ‘Reduction of Parameter Sensitivity in an Induction Motor Current Regulator Using Integrated Pilot Sensors in the Low-Side Switches’, Proc. of IEEE IAS Conf., Oct. 3-7, 2004, Seattle, pp. 647-654 
  10. P.F. Ladwig, I.F. Tsu, C.H. Chang and Y.A. Chang, ‘Thermal Modeling of Magnetoresistive Heads in Three Dimensions,’ IEEE Trans. on Magnetics, Vol. 37, No. 3, May 2001 
  11. J.M. Daughton, ‘GMR and SDT Sensor Applications’, IEEE Trans. on Magnetics, Vol. 36, No. 5, September 2000 
  12. E.R. Olson and R.D. Lorenz, ‘GMR-Based Point Field Detection for High Bandwidth, High Fidelity Measurement of AC and DC Current in Bus Bars’, IEEE IAS Annual Conf., Seattle, WA, Oct. 3-7, 2004 
  13. D.A. Murdock, ‘Active Thermal Control of Power Electronic Modules’, M.S. ECE. Thesis, University of Wisconsin-Madison, 2002 
  14. M.C. Harke, H. Kim, R.D. Lorenz, ‘Sensorless Control of Interior Permanent Magnet Machine Drives for Zero-Phase-Lag Position Estimation,’ IEEE Trans on Ind. Appl., Nov./Dec. 2003, pp. 1726- 1733 
  15. C.H. Smith and R.W. Schneider, ‘Expanding the Horizons of Magnetic Sensing: GMR,’ Proc Sensors Expo Boston:139-14 
  16. E.R. Olson, ‘Integration of Giant Magneto-resistive Current and Temperature Sensors in Power Electronic Modules’, MS ECE Thesis, Univ. of Wisconsin- Madison, Aug, 2003 
  17. S. Chakrabarti, T.M. Jahns and R.D. Lorenz, ‘A Current Reconstruction Algorithm for Three-Phase Inverters Using Integrated Current Sensors in the Low-Side Switches,’ IEEE IAS 2003 Annual Conf., Salt Lake City, Utah, Oct. 12-16, 2003, pp. 925-932 
  18. R.S. Popovic, P.M. Drljaca, and C.Schott, ‘Bridging the gap between AMR, GMR, and Hall magnetic sensors’, 23rd Intl. Conf. on Microelectronics (MIEL),. Vol: 1 , 2002 
  19. ‘Engineering and Application Notes, Giant Magnetoresistive (GMR) Sensors’, Nonvolatile Electronics, Inc., www.nve.com, Sept. 1998 
  20. M. Held, P. Jacob, G. Nicoletti, P. Scacco, and M.H. Poech, ‘Fast power cycling test for IGBT modules in traction application,’ IEEE Power Electronics and Drive Systems, vol. 1, pp. 425-430, 1997 
  21. K.Y. Kim, S.H. Lim, G.S. Park, M.H. Blamire and J.E Evetts, ‘Effects of the Shape Anisotropy on the Giant Magnetoresistance Properties,’ IEEE Trans. on Magnetics, Vol. 37, No. 6, November 2001 
  22. J.E. Ramos, J.J. Connors, D.A. Murdock and R.D. Lorenz, ‘Active Thermal Control of Power Electronic Modules,’ IEEE IAS Annual Conf. Salt Lake City, Utah, Oct. 12-16, 2003, pp. 1511-1515 
  23. M.W. Degner and R.D. Lorenz, ‘Position Estimation in Induction Machines Utilizing Rotor Bar Slot Harmonics and Carrier Frequency Signal Injection’, IEEE Trans. on Ind. Appl., May/June 2000 pp. 736- 742 
  24. P.L. Jansen and R.D. Lorenz, ‘Transducerless Field Orientation Concepts Employing Saturation-Induced Saliencies in Induction Machines’, IEEE Trans. on Ind. Appl., Nov./Dec. 1996, pp. 1380-1393 
  25. P.L. Jansen, M.J. Corley and R.D. Lorenz, 'Flux, Position, and Velocity Estimation in AC Machines at Zero Speed via Tracking of High Frequency Saliencies', EPE Journal, Vol. 9 , Aug. 1999, no 1-2 
  26. R.D. Lorenz and K. Van Patten, ‘High Resolution Velocity Estimation for All Digital, AC Servo Drives’, IEEE Trans. on Ind. Appl., July/Aug., 1991, Vol 27, No. 4, pp. 701-705 
  27. Jun He, V. Mehrotra, and M.C. Shaw, ‘Thermal design and measurements of IGBT power modules: transient and steady state’, IEEE IAS Annual Conf., Phoenix, AZ, pp. 1440-1444, Oct. 1999 
  28. V. Blasko, R. Lukaszewski, and R. Sladky, ‘On-line thermal model and thermal management strategy of a three phase voltage source inverter,’ IEEE IAS Annual Conf., Phoenix, pp. 1423-1431, Oct. 1999 
  29. J.J. Connors, ‘Active Tj and Δj Control of Power Electronics’, M.S. ME. Thesis, University of Wisconsin-Madison, 2004 
  30. P.L. Jansen and R.D. Lorenz, ‘Transducerless Position and Velocity Estimation in Induction and Salient AC Machines’, IEEE Trans. on Ind. Appl., March/April 1995, pp. 240-247 
  31. M.W. Degner, R.D. Lorenz, ‘Using Multiple Saliencies for the Estimation of Flux, Position, and Velocity in AC Machines’, IEEE Trans. on Ind. Appl., Sept./Oct. 1998, pp. 1097-1104 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일