• 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

연속적인 순간전압강하에 의한 저압 부하의 정량적 영향 평가

Quantitative Evaluation of the Impact of Low-Voltage Loads Due to the Successive Voltage Sags


Automatic reclosing is a typical protection method in power distribution systems for clearing the temporary faults. However, it has a fatal weakness in regards to voltage sags because it produces successive voltage sags. In this paper, we explored successive impact of voltage sag due to the automatic reclosing of power distribution systems. The actual tests of low voltage loads were accomplished for obtaining the susceptibility of voltage sags. The final results of the test yielded power acceptability curves of voltage sag, and the curves were transformed the 3-dimensional CBEMA(Computer Business Equipment Manufacturer Association) format. For the quantitative evaluation of the impact of successive voltage sags, an assessment formulation using the voltage sag contour was proposed. The proposed formulation was tested by using the voltage sag contour data of IEEE standard and the results of the test. Through the case studies, we verified that the proposed method can be effectively used to evaluate the actual impact of successive voltage sans.

참고문헌 (11)

  1. L. E. Conrad et al., 'Proposed chapter 9 for predicting voltage sags (dip) in revision to IEEE Std 493, the Gold Book,' IEEE Trans. Industry Applications, Vol. 30, No. 3, pp. 805-821, May/June 1994 
  2. L. E. Conrad and Math H. J. Bollen, 'Voltage sag coordination for reliable plant operation,' IEEE Trans. on Ind. Appl., vol. 33, no. 6, pp. 1459-1464, Nov./Dee. 1997 
  3. D. L. Brooks, et al., 'Indices for assessing utility distribution system RMS variation performance,' IEEE Trans. on PWRD, vol. 13, no. 1, pp. 254-259, Jan. 1998 
  4. S.-Y. Yun and J.-C. Kim, 'An evaluation method of voltage sag using a risk assessment model in power distribution system,' International Journal of EP&ES(Elsevier Science), Vol. 25, No. 10, pp. 829-839, December 2003 
  5. IEEE recommended practice for emergency and standby power systems for industrial and commercial applications, ANSI/IEEE Std. 446, 1987 
  6. Y. Sekine, T. Yamamoto, S. Mori, N. Saito, and H. Kurokawa, 'Present state momentary voltage dip interferences and the countermeasures in Japan,' CIGRE 36-206, September 1992 
  7. J. Lamoree, D. Mueller, P. Vinett, W. Jones, and M. Samotyj, 'Voltage' sag analysis case studies,' IEEE Trans. Industry Applications, Vol. 30, No. 4, pp. 1083-1089, July/August 1994 
  8. J. Arrillaga, N. R. Watson, and S. Chen, Power system quality assessment, Chichester: John Wiley & Sons, 2000 
  9. IEEE recommended practice for evaluating electric power system compatibility with electronic process equipment, IEEE Std. 1346, 1998 
  10. IEEE guide for service to equipment sensitive to momentary voltage disturbances, IEEE Std. 1250, 1995 
  11. J. C. Kim and J. R. Shin, A study for the optimal reclosing method on the transmission and distribution line, Korea Electric Power Research Institute, Taejeon, Chung-Nam, Korea, Tech. Rep. TR.95YJ18.J1998.12, April 1998 

이 논문을 인용한 문헌 (1)

  1. Yun Sang-Yun ; Moon Jong-Fil ; Kim Jae-Chul ; Lee Hee-Tae 2006. "A Study on the Susceptibility of Single-phase Sensitive Loads and the Three-phase Induction Motor by Voltage Sag" 전기학회논문지. The transactions of the Korean Institute of Electrical Engineers. A / A, 전력기술부문, 55(1): 37~44 


원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일