$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

Abstract

The inverse pseudo excitation method is used in the identification of random loadings. For structures subjected to stationary random excitations, the power spectral density matrices of such loadings are identified experimentally. The identification is based on the measured acceleration responses and the structural frequency response functions. Numerical simulation is used in the optimal selection of sensor locations. The proposed method has been successfully applied to the loading identification experiments of three structural models, two uniform steel cantilever beams and a four-story plastic glass frame, subjected to uncorrelated or partially correlated random excitations. The identified loadings agree quite well with actual excitations. It is proved that the proposed method is quite accurate and efficient in addition to its ability to alleviate the ill conditioning of the structural frequency response functions.

참고문헌 (20)

  1. Bendat, J.S. and Piersol, A.G. (2000), Random Data: Analysis and Measurement Procedures, John Wiley & Sons, Inc., New York. 
  2. Ewins, D.J. (1984), Modal Testing: Theory and Practice, Research Studies Press Ltd., London. 
  3. Lin, J.H. (1992), "A fast CQC algorithm of PSD matrices for random seismic responses", Comput. Struct., 44, 683-687. 
  4. Lin, J.H., Zhang, W.S. and Li, J.J. (1994), "Structural responses to arbitrarily coherent stationary random excitations", Comput. Struct., 50(5), 629-633. 
  5. Zhu, X.Q. and Law, S.S. (2002), "Moving loads identification through regularization", J. Eng. Mech., 128(9), 989-1001. 
  6. Avitabile, P. and Chandler, D. (2001), "Selection of measurement references using the TRIP method", Proc. of 19th Int. Modal Analysis Conf., Florida, U.S.A. 
  7. Giansante, N., Jones, R. and Galapodas, N.J. (1982), "Determination of in-flight helicopter loads", J. of the American Helicopter Society, 27(3), 58-64. 
  8. Hillary, B. and Ewins, D.J. (1984), "The use of strain gages in force determination and frequency response measurements", Proc. of 2nd Int. Modal Analysis Conf., 627-634, Florida, U.S.A. 
  9. Karl, S.K. (1987), "Force identification problems-An overview", Proc. of the 1987 Society of Experimental Mechanics Spring Conf. on Experimental Mechanics, 838-844, Florida, U.S.A. 
  10. Barlett, F.D. and Flannelly, W.G. (1979), "Modal verification of force determination for measuring vibratory loads", J. of the American Helicopter Society, 19(4), 10-18. 
  11. Callahan, O.J. and Piergentili, F. (1994), "Force estimation using operational data", Proc. of 8th Int. Modal Analysis Conf., 1586-1592. 
  12. Li, D.S. and Guo, X.L. (2003), "Loading identification of random excitations", Proc. of 21th Int. Modal Analysis Conf., Florida, U.S.A. 
  13. Newland, N.E. (1984), An Introduction to Random Vibration and Spectral Analysis, Longman, London. 
  14. Golub, G.H. and Van Load, C.F. (1996), Matrix Computation, The Johns Hopkins University Press. 
  15. Desanghere, G. and Snoeys, R. (1985), "Indirect identification of excitation forces by modal coordinate transformation", Proc. of 3rd Int. Modal Analysis Conf., 685-690, Florida, U.S.A. 
  16. Okubo, N., Tanabe, S. and Tatsuno, T. (1985), "Identification of forces generated by a machine under operation condition", Proc. of 3rd Int. Modal Analysis Conf., 920-927, Florida, U.S.A. 
  17. Adams, Robert and Doyle, James F. (2002), "Multiple force identification for complex structures", Experimental Mechanics, 42(1), 25-36. 
  18. Dobson, B.J. and Rider, E. (1990), "A review of the indirect calculation of excitation forces from measured structural response data", J. Mech. Eng. Sci. : Part C, 204, 69-75. 
  19. Juang, J.N. (1994), Applied System Identification, PTR Prentice-Hall, Inc., New Jersey. 
  20. Lin, J.H., Guo, X.L., Zhi, H., Howson, W.P. and Williams, F.W. (2001), "Computer simulation of structural random loading identification", Comput. Struct., 79, 375-387. 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • 원문 PDF 정보가 존재하지 않습니다.

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일