$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

Genetic algorithm based optimum design of non-linear steel frames with semi-rigid connections

Abstract

In this article, a genetic algorithm based optimum design method is presented for non-linear steel frames with semi-rigid connections. The design algorithm obtains the minimum weight frame by selecting suitable sections from a standard set of steel sections such as European wide flange beams (i.e., HE sections). A genetic algorithm is employed as optimization method which utilizes reproduction, crossover and mutation operators. Displacement and stress constraints of Turkish Building Code for Steel Structures (TS 648, 1980) are imposed on the frame. The algorithm requires a large number of non-linear analyses of frames. The analyses cover both the non-linear behaviour of beam-to-column connection and $P-{\Delta}$ effects of beam-column members. The Frye and Morris polynomial model is used for modelling of semi-rigid connections. Two design examples with various type of connections are presented to demonstrate the application of the algorithm. The semi-rigid connection modelling results in more economical solutions than rigid connection modelling, but it increases frame drift.

참고문헌 (24)

  1. Eurocode 3 (1992), Design of Steel Structures, Part I: General rules and rules for buildings, Comite European de Normalisation (CEN), Brussels, Belgium. 
  2. Euronorm, 53-62, (1993), European Wide Flange Beams, CEN, Brussels, Belgium. 
  3. Faella, C., Piluso, V. and Rizzano, G. (2000), Structural Steel Semirigid Connections, CRC Press, LLC. 
  4. Frye, M.J. and Morris, G.A. (1975),"Analysis of flexibly connected steel frames", Can. J. Civ. Engrg., 2, 280-291. 
  5. Goldberg, D.E. (1989), Genetic Algorithms in Search, Optimization and Machine Learning, Addisson-Wesley, Reading, MA. 
  6. Goto, Y. and Miyashita, S. (1998),"Classification system for rigid and semirigid connection", J. Struct. Engrg., ASCE, 124(7), 750-757. 
  7. Hayalioglu, M.S. (2000),"Optimum design of geometrically non-linear elastic-plastic steel frames via genetic algorithm", Comput. Struct., 77(5), 527-538. 
  8. Hayalioglu, M.S. (2001),"Optimum load and resistance factor design of steel space frames using genetic algorithm", Struct. Multidisc. Optim., 21(4), 292-299. 
  9. Kameshki, E.S. and Saka, M.P. (2001),"Optimum design of nonlinear steel frames with semi-rigid connections using a genetic algorithm", Comput. Struct., 79, 1593-1604. 
  10. Kim, Y. and Chen, W.F. (1998),"Practical analysis for partially restrained frame design", J. Struct. Engrg., ASCE, 124(7), 736-749. 
  11. Kishi, N., Chen, W.F. and Goto, Y. (1997),"Effective length factor of columns in semirigid and unbraced frames", J. Struct. Engrg., ASCE, 123(3), 313-320. 
  12. Rajeev, S. and Krishnamoorthy, C.S. (1992),"Discrete optimization of structures using genetic algorithms", J. Struct. Engrg., ASCE, 118(5), 1233-1250. 
  13. Simoes, L.M.C. (1996)"Optimization of frames with semi-rigid connections", Comput. Struct., 60(4), 531-539. 
  14. Syswerda, G. (1989),"Uniform crossover in genetic algorithms", Proc. of 3-rd Int. Conf. on Genetic Algorithms, Los Altos, CA. 
  15. TS 648 (1980), Building Code for Steel Structures, Turkish Institute of Standards, Ankara. 
  16. TS 4561 (1985), Rules for Plastic Design of Steel Structures, Turkish Institute of Standards, Ankara. 
  17. Xu, L. and Grierson, D.E. (1993),"Computer automated design of semi-rigid steel frameworks", J. Struct. Engrg., ASCE, 119(6), 1740-1760. 
  18. Abdalla, K.M. and Chen, W.F. (1995),"Expanded database of semi-rigid steel connections", Comput. Struct., 56(4), 553-564. 
  19. AISC Manual of Steel Construction (1995), Load and Resistance Factor Design, Chicago, ILL. 
  20. Almusallam, T.H. (1995),"Effect of connection flexibility on the optimum design of steel frames", Proc. of Int. Conf. on Developments in Computational Techniques for Civil Engineering, Edinburgh. 
  21. BS5950 (1990), British Standards, Structural use of steelworks in building, British Standard Institution, London, UK. Chajes, A. and Churcill, J.E. (1987),"Nonlinear frame analysis by finite element methods", J. Struct. Engrg., ASCE, 113(6), 1221-1235. 
  22. Chen, W.F. and Lui, E.M. (1991), Stability Design of Steel Frames, CRC Press, Inc. 
  23. Chen, W.F., Goto, Y. and Liew J.Y.R. (1996), Stability Design of Semi-rigid Frames, John Wiley & Sons, Inc. 
  24. Dhillon, B.S. and O'Malley, J.W. (1999),"Interactive design of semirigid steel frames", J. Struct. Engrg., ASCE, 125(5), 556-564. 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • 원문 PDF 정보가 존재하지 않습니다.

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일