$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

상악 제1소구치의 교두각에 따른 전부도재관의 응력분포에 관한 삼차원유한요소법적 연구
A STUDY ON THE STRESS DISTRIBUTION OF THE ALL CERAMIC CROWNS ACCORDING TO THE CUSP ANGLE OF THE MAXILLARY FIRST PREMOLAR USING THREE DIMENSIONAL FINITE ELEMENT METHOD 원문보기

대한치과보철학회지 = The journal of Korean academy of prosthodontics, v.42 no.1, 2004년, pp.58 - 72  

김원규 (원광대학교 치과대학 치과보철학교실) ,  신동국 (원광대학교 치과대학 치과보철학교실) ,  송기범 (원광대학교 치과대학 치과보철학교실) ,  동진근 (원광대학교 치과대학 치과보철학교실)

Abstract ▼ AI-Helper 아이콘AI-Helper

Statement of problem : Clinically, maxillary first premolar has a high risk of fracture. This is thought to be caused by the susceptible figure which the maxillary first premolar has In other words, sharp cusp angles of the premolar is thought to influence this situation. Purpose : This study was to...

주제어

#All-ceramic crown   #Cusp angle   #Finite element method  

참고문헌 (45)

  1. Southan DE, Jorgensen KD. Faulty porcelain jacket crowns. Aust Dent J, 1973; 18:152-156 

    상세보기 crossref

  2. Clause H. Vita In-Ceram a new system for producing aluminum oxide crown and bridge substructures. Quintessenz Zahntech 1990;16:35-46 

  3. Optec HSP laboratory technique manual. J eneric/Pentro Inc, Wallingford. Conn, January, 1988 

  4. Beham G. IPS-Empress. A new ceramic technology. Ivoclar-Vivadent report.1990;6:1-13 

  5. Schwickerrath H. Die In-Ceram Aluminiumoxid-Keramiken innovativer dental kelamischer Werkstoff. Dent Labor. 1989;37:1597 

  6. Adair PJ, Grossman DG. The castable ceramic crown. Int J Periodont Rest Dent. 1984;2:32-45 

  7. Dicor laboratory manual, Dentsply international, York, PA, 1987 

  8. Kelly JR. Giordano R. Pober R. Cima MJ. Fracture surface analysis of dental ceramics: clinically failed restorations. Int J Prosthodont. 1990;3:430-440 

  9. Kern M, Doglas WH, Fechtig T, Strub JR, Delong R, Fracture strength of all-pocelain. Resin bonded bridges after testing in an artificial oral environment. J Prosthet Dent, 1993;21:117-121 

  10. Doyle MG, Goodacre CJ. Andres CJ. The effect of tooth preparation design on the breaking strength of Dicor crown: Part 3. lnt J Prosthodont. 1990;3:327-340 

  11. Fiedlander LD, Munoz CA, Goodacre CJ, Doyle MG, Moor BK. The effect of tooth preparation design on breaking strength of Dicor crowns: Part 1. Int J Prosthodont, 1990;3:159-164 

  12. Yoshinari M, Derand T. Fracture strength of all-ceramic crowns. Int J Prosthodont, 1994;7:329-338 

    상세보기

  13. Eden GT, Kacicz JM. Dieor crown strength improvement due to bonding. J Dent Res, 1987;66:207 abstr No. 802 

  14. Grossman DG. Nelson JW. The bonded Dicor crown; J Dent Res 1987;66:206 abstr No.800 

  15. Sjogren G. Clinical Examination of LeuciteReinforced Glass-Ceramic Crowns(Empress) In General Pactice: Int J Prosthodont. 1999;12:124-125 

  16. Browning JD. Meador LW. Eick JD. Movement of three removable partial denture clasp assemblies under occlusal loading. Int J Prosthodont Dent. 1986;55:69-74 

  17. Weijs WA. and Dejongh HT : Strain in mandibular alveolar bone during mastication in the rabbit. Arch. Oral. Biol. 1977;22:667-675 

  18. Ralph WJ. and Williams JF : Analysis of stresses in alveolar bone (A two-dimensional photoelastic model). Arch. Oral.Biol. 1975;20:411-414 

    상세보기 crossref

  19. Standlee JP. Caputo AA. and Ralph JP. Stress trajectories within the mandible under occlusal loads. J.Dent.Res. 1977;56:1297-1302 

  20. Kratochvil FJ. Thompson WD and Caputo AA. Photoelastic analysis of stress patterns on teeth and bone with attatchment retainers for removable partial dentures. J.Prosthet. Dent. 1981;46:21-28 

  21. Anydinlink E. Akay HU. Effect of resilient layer in a removable partial denture base on stress distribution to the mandible. Int J Prosthodont Dent. 1980;44:17-20 

  22. Shohet H. Relative magnitude of stress on abutment teeth with different retainers. J Prosthet Dent.. 1969;21:267-282 

    상세보기 crossref

  23. Craig RG. Farah JW. Stresses from loading distal-extension removable partial dentures. J Prosthet Dent .,1976;36:243-253 

  24. Knoell AC. A mathematical model of an in vitro human mandible. J.Bio-mechanics. 1977;10:159-166 

  25. Anusavice KJ. Hojjatie B. Influence of incisal length of ceramic and loading orientation on stress distribution in ceramic crowns. J Dent Res .. 1988;67:1371-1375 

  26. Anusavice KJ. Hojjatie B. Stress distribution in metal-ceramic crowns with a facial porcelain margin. J Dent Res., 1987;66:1493-1498 

  27. Chai JY. Steege JW. Effects of labial margin design on stress distribution of a porcelain-fused-to-metal crown. J Prosthodont. 1992;1:18~23 

  28. Saklad MJ. The disclosure of cleavage and fracture lines in porcelain restorations. Int J Prosthodont Dent. 1958;8:115 

  29. Pettrow JN. Practical factors in building and firing characteristics of dental porcelain. J Prosthet Dent., 1961;11:334 

    상세보기 crossref

  30. Oppice HW. A resume of ideas on porcelain jacket crown preparations. J Am. Dent. Assoc. 1934:21:1030-1039 

  31. Rosenstiel SF. Land MF. Fujimoto M. Contemporary fixed prosthodontics. 1st ed. Mosby Co. 1987 

  32. Dykema RW. Goodacre CJ. Phillips RW. Johnston' s modern practice in fixed prosthodontics. 4th ed. WB. Saunders Co. 1986 

  33. Malone WFP. Koth DL. Tylman' s theory and practice of fixed prosthodontics. 8th ed, Ishiyaku EuroAmerica Inc. 1989 

  34. Derand T. The importance of an even shoulder preparation in porcelain crowns. Odontol. Rev. 1972;23:305-314 

  35. Sjogren G. Bergman M. Relationship between compressive strength and cervical shaping of the all-ceramic Cerestore crown. Swed Dent J. 1987;11:147-152 

  36. Friedlander. LD. Munoz CA. Goodacre CJ. Doyle MG. Moore BK. The effect of tooth preparation design on the breaking strength of Dicor crowns : Part 1. Int J Prosthodent, 1990;3:159-168 

  37. Bernal G, Jones RM, Brown DT. Munoz CA, Goodacre CJ. The effect of finish line form and luting agent on the breaking trength of Dicor crowns. Int Prosthodont., 1993;6:286-290 

  38. Kim HS, Ju TH, Oh SC. Dong JK. A study in the fracture strength of the lPSEmpress ceramic crown according to margin type. J Korean AcademyProsthodontics. 1997;35:296-307 

  39. Jensen ME. Sheth JJ, and Tolliver D. Etched-porcelain resin-bonded full-veneer crowns: in vitro fracture resistance. Compend Contin Educ Dent, 1989;X(6):336-346 

  40. Duffin JL, Bales DJ, Johnson GH. Fracture resistance of castable ceramic crowns(abstract). J Dent Res 1989;68:235 

  41. Hsu CS. Stangel I, Nathanson D. Shear bond strength of resin to etched porcelain(abstract). J Dent Res 1985;64:296 

  42. McInnes-Ledoux PM. Ledoux WR, Weinberg R, Pappold A. Luting castable ceramic restorations- a bond strength study(abstract) J Dent Res. 1987;66:245 

  43. Deboever JA, McCall WD. Holden S, Ash MM. Functional occlusal forces : An investigation by telemetry. J Prosthet Dent. 1978;40:326-333 

    상세보기 crossref

  44. Kawamura Y. Oral physiology.Kyoto. Japan.Nagamatsu Shoten. 1976;212-227 

  45. Kober KH, Ludwig K. Maximale Kaukraft als Berechnungsfaktor zahntechnischer Konstruktionen. Dent Labor. 1983;31:55-60 

저자의 다른 논문 :

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로