최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국농공학회논문집 = Journal of the Korean Society of Agricultural Engineers, v.46 no.3, 2004년, pp.73 - 81
FRP reinforcing bars(rebars) are produced through a variety of manufacturing process includes pultrusion, and filament winding and braiding etc. Each manufacturing method produces a different surface condition of FRP rebar. The surface properties of FRP rebar is an important property for mechanical ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
ACI Report 440R, 1996, State-of-the-art report on fiber reinforced plastic reinforcement for concrete structure, reported by ACI Committee 440, Detroit, Ml, USA
ACI 440H, 2000, Guide for the Design and Construction of Concrete Reinforced with FRP bars, American Concrete Institute Committee 440.
Al-Dulaijan, S.U., A. Nanni, M.M. Al-Zahrani., and C.E. Bakis., 1996, Bond Evaluation of Environmentally Conditioned GFRP/Concrete System, Proceedings of the Second International Conference on Advanced Composite Materials in Bridges and Structures (ACMBS-2), M. M. EI-Badry, Ed., Canadian Society for Civil Engineering, Montreal, Quebec, pp.845-852
Bakis, C. E., A.J. Freimanis., D. Gremel., and A. Nanni., 1998, Effect of Resin Material on Bond and Tensile Properties of Unconditioned and Conditioned FRP Reinforcement Rods, Proceedings of the First international Conference on Durability of Composites for Construction, B. Benmokrane, and H. Rahman, Eds., Sherbrooke, Quebec. pp.525-535
Bank, L.C., M. Puterman., and A. Katz., 1998, The Effect of Material Degradation on Bond Properties of FRP Reinforcing Bars in Concrete, ACI Materials Journal, V. 95, No. 3, pp.232-243.
Boothby, T.E., A. Nanni., C.E. Bakis., and H. Huang., 1995, Bond of FRP Rods Embedded in Concrete, Engineering Mechanics, Proc. 10th Conf., Vol. 1, S. Sture, ed., American Society Civil Engineers. New York, pp.114-117.
Chaallal, O. and B. Benmokrane., 1993, Pullout and Bond of Glass - Fibre Rods Embedded in Concrete ard Cement Grout, Materials and Structures, 26, pp.167-175.
Faza, S.S., and H.V.S. GangaRao., 1990, Bending and Bond Behavior of Concrete Beams Reinforced with Plastic Rebars, Transportation Research Record 1290, pp.185-193.
Freimanis, A.J., C.E. Bakis., A. Nanni., and D. Gremel., 1998, A Comparison of Pullout and Tensile Behaviors of FRP Reinforcement for Concrete, Proceedings of the Second International Conference on Composites in Infrastructure (lCCI-98), Tucson, Arizona, V. 2, pp. 52-65.
Johnston, D.W. and P. Zia., 1982, Bond Characteristics of Epoxy Coated Reinforcing Bars, Report No. FHWA/NC/82-002, North Carolina State University, Raleigh, North Carolina.
Larralde, J., R. Silva- Rodriguez., J. Burdette., and B. Harris., 1994, Bond Tests of Fiberglass-Reinforced Plastic Bars in Concrete, Journal of Testing and Evaluation, 22(4), pp.351-359.
Mathey, R. G. and D. Watstein., 1961, Investigation of Bond in Beam and Pull- Out Specimens with High-Yield-Strength Deformed Bars, Journal of the American Concrete Institute, 57(9), pp. 1071-1090.
Nanni A., S. Rizkalla., C.E. Bakis., J.O. Conrad., and A.A. Abdelrahman., 1998, Characterization of GFRP Ribbed Rod Used for Reinforced Concrete Construction, Proceedings of the International Composites Exhibition (ICE-98), Nashville, Tennessee, pp. 16A/1-6. 26
Park, C. G, and J.P. Won., 2004, Tensile Behavior and Fracture Properties of Ductile Hybrid FRP Reinforcing Bar for Concrete Reinforcement, Journal of the Korean Society of Agricultural Engineers, Vol. 46, No. 1 , pp. 41-51. (in Korean)
※ AI-Helper는 부적절한 답변을 할 수 있습니다.