최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국공작기계학회논문집 = Transactions of the Korean society of machine tool engineers, v.14 no.2, 2005년, pp.55 - 61
이갑조 (조선대학교 대학원 기계공학과) , 오상록 (조선대학교 대학원 기계공학과) , 김종관 (조선대학교 기계공학과)
The machining Parts must be Produced within the specification of drawing and those will be able to meet faction and efficiency. At that time, it is very important not only precision machine and machining technique but also the measurement technique. So, the improvement of measurement technique is to...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
ANSI Y14.5M, 1982, Dimensioning and Tolerancing, American National Standard, pp. 53-89
Jung M. S., 1985, Theory of Errors in dimensional Measurements 2nd Edition, KRISS, pp. 1-22
Eom T. B., 2002, Standard Calibration Procedure of Coordinate Measuring Machines, KASTO, pp. 9-37
Lim J. S., and Yang S. H., 2000, Standard Calibration Procedure of Coordinate Measuring Machines, KASTO, pp. 14-42
Jung M. S., 1999, Guide to the Expression of Uncertainty in Measurement, KRISS, pp. 17-40
EA-4/02, 1999, Expression of the Uncertainty of Measurement in Calibration, European co-operation for Accreditation, pp. 5-13
KOLAS-SG-101, 2002, Guidelines for Evaluating and Expressing the Uncertainty of Measurement Results, KOLAS, pp. 5-12
Lee G. T., Lee D. J., Yoon Y. S., Park H. C. ,and Oh, J. M., 2003, 'A Study on Measurement Uncertainty of Theodolite System,' Journal of the KSMTE Spring Conference 2003, No. 1, pp. 229-233
ISO/IEC 17025, 1999, General Requirements for the Competence of Testing and Calibration Laboratories, pp. 25-33
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.