$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

NUMERICAL STUDY FOR A SECONDARY CIRCULAR CLARIFIER WITH DENSITY EFFECT

Environmental engineering research v.10 no.1 , 2005년, pp.15 - 21  
Abstract

A computer program is developed for the prediction of the flow pattern and the removal efficiency of suspended solid (SS) in a circular secondary clarifier. In this study the increased density effect by SS on hydrodynamics has been systematically investigated in terms of Froude Number (Fr), baffle existence, and a couple of important empirical models associated with the particle settling and Reynolds stresses. A control-volume based-finite difference method by Patankar is employed together with the SIMPLEC algorithm for the resolution of pressure-velocity coupling. The k-ε turbulence and its modified version are incorporated for the evaluation of Reynolds stresses. The calculation results predicts well the overall flow pattern such as the waterfall phenomenon at the front end of the clarifier and the bottom density current with the formation of strong recirculation especially for the case of decrease of Fr. Even if there are some noticeable differences in the prediction of two turbulence models, the calculated results of the radial velocity profiles are generally in good agreement against experimental data appeared in open literature. Parametric investigation has been systematically made with the Fr and baffle condition with detailed analysis.

참고문헌 (15)

  1. Stamou, A. I., 'Modelling of settling tanks a critical review,' 3rd International Conference, Water Pollution 95, Porto Carras, Greece, 25-28 April (1995) 
  2. Zhou, S. and McCorquodale, J. A, 'Influence of density on circular clarifiers with baffles,' J. Environ. Eng., 118(6), 829-847 (1992a) 
  3. Lee, E. J., Park, B. S., lang, D. S., and Lee, S. J., 'A numerical study on the design of primary clarifier:SS concentration and FTC,' KSEE, 18(11), 1335-1346 (1996) 
  4. Zhou, S. and McCorquodale, J. A, 'Modeling of rectangular settling tanks,' Journal of hydraulic Engineering, 118(10), 1391-1405 (1992b) 
  5. McCorquodale, J. A. and Zhou, S., 'Effect of hydraulic and solids loading on clarifier performance,' Journal of hydraulic research, 31(4), 461-478 (1993) 
  6. Brouckaert, C. J. and Buckley, C. A., 'The use of computational fluid dynamics for improving the design and operation of water and wastewater treatment plants,' Water Sci. Technol., 40(4-5), 81-89 (1999) 
  7. Kim, H. S., Shin, M. S., lang, D. S., lung, S. H., and Gang, D. H., 'A study of SS-driven flow characteristics in a final clarifier,' KSEE, 26(2), 629-634 (2004) 
  8. Patankar, S. V., Numerical heat transfer and fluid flow, McGraw-Hili Company (1980) 
  9. Takacs, I., Patry, G. G., and Nolasco, D., 'A dynamic model of the clarification thickening process,' Water Res., 25(10), 1263-1271 (1991) 
  10. Shin, M. S., Kim, H. S., lang, D. S., Lee, Y. S., and Lee, S. N., 'A numerical and experimental study on the mixing characteristics of stratified thermal storage,' Environ. Eng. Res., 8(1), 41-47 (2003) 
  11. Kim, H. S., 'Numerical modeling of SS separation, thermal drying and incineration pollutant abatement in a sludge and wastes related combined system,' Ph. D. Thesis, Chungnam National Univ. (2004) 
  12. McCorquodale, J. A. and Zhou, S., 'Density currents in clarifiers,' Proc., 1987 Nat. Conf. Hydr. Engrg., ASCE, Williamsburg, Va., 56-61 (1989) 
  13. Lyn, D. A, Stamou, A I., and Rodi, W., 'Density currents and shear-induced flocculation in sedimentation tanks,' Journal of hydraulic Engineering, 118(6), 849-867 (1992) 
  14. Shin, M. S., Kim, H. S., lang, D. S., Kim, D. C., and Ohm, T. I., 'Development of a computer progran for the prediction of SNCR process of a 2-D combustor,' Environ. Eng. Res., 6(1), 7-15 (2001) 
  15. Mazzolani, G., Pirozzi, F., and d'Antonoi, G., 'A generalized settling approach in the numerical modeling of sedimentation tanks,' Water Sci. Technol., 38(3), 95-102 (1998) 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일