Abstract

In heavy industrial fields such as power plant and chemical plant, it is often necessary to restore damaged part of large machinery and structure which is installed in the hazard working place. In this paper, to estimate stress distribution which occurs during damage and restoration of cylindrical beam structure, the finite element technique has been used. A finite element model was verified by experiment for non deformed cylindrical beam structure. The displacements and elastic recovery have an excellent agreement between experiment and finite element analysis. The variations of stress distribution on deformation and restoration procedure for surfaces have been examined. The maximum von Mises stress appears in the surface for deformation and restoration procedure. In deformation procedure, the maximum stress occurs in the vicinity of support body. In restoration procedure, the maximum stress occurs in the vicinity of the fixing body. The fixing body allows avoiding stress concentration in adjacent support structure boundary.

주제어

#변형   #복원공정   #응력분포   #실린더 형상 구조물  

저자의 다른 논문

참고문헌 (4)

1. Kim, T. J., Kim, N. S., Park, S. C. and Jeong, W. W., 2002, 'Finite Element Analysis of Shot Peening Effected by Multiple Impacts,' Trans. of the KSME (A), Vol. 26, No. 12, pp. 2656-2661  원문보기 상세보기
2. Park, Y. D., Byun, S. K. and Kang, B. S., 1998, 'Thermal Deformation and Thermal Stress Analysis of Pipe During Pipe Internal Fluid Freezing,' Trans. of the KSME (A), Vol. 22, No.1, pp. 227-237  원문보기 상세보기
3. Lee, S. B., 1992, 'Distributions of Load Stresses and Residual Stresses at Notchs,' KSME Int. Journal, Vol. 6, No.2, pp. 132-139 
4. ANSYS Inc., 2004, Structural Analysis Guide, release 8.1 

이 논문을 인용한 문헌 (0)

1. 이 논문을 인용한 문헌 없음