[논문]Effect of Fiber Friction, Yarn Twist, and Splicing Air Pressure on Yarn Splicing Performance

Das A.; Ishtiaque S. M.; Parida Jyoti R.

doi:10.1007/bf02875576

Effect of Fiber Friction, Yarn Twist, and Splicing Air Pressure on Yarn Splicing Performance 원문보기

Fibers and polymers, v.6 no.1, 2005년, pp.72 - 78

Das A. (Department of Textile Technology, Indian Institute of Technology) , Ishtiaque S. M. (Department of Textile Technology, Indian Institute of Technology) , Parida Jyoti R. (Department of Textile Technology, Indian Institute of Technology)

Abstract ▼ AI-Helper

The impact of fiber friction, yarn twist, and splicing air pressure on mechanical and structural properties of spliced portion have been reported in the present paper. The mechanical properties include the tensile and bending related properties and, in the structural properties, the diameter and packing density of the splices are studied. A three variable three level factorial design approach proposed by Box and Behnken has been used to design the experiment. The results indicate that there is a strong correlation between retained spliced strength (RSS) and retained splice elongation (RSE) with all the experimental variables. It has been observed that RSS increases with the increase in splice air pressure and after certain level it drops, whereas it consistently increases with the increase in yarn twist. The RSE increases with the increase in both fiber friction and yarn twist. It has also been observed that the yarn twist and splicing air pressure have significant influence on splice diameter, percent increase in diameter and retained packing coefficient, but the fiber friction has negligible influence on these parameters. Yarn twist and splicing air pressure has a strong correlation with splice flexural rigidity, where as poor correlation with retained flexural rigidity.

주제어

AI 본문요약
AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

대상 데이터

The same process was repeated subsequently to get enough splice joints in the wound yam. About 200 splice joints were prepared for each run. In this way 15 different combination of sample were prepared in a random sequence by varying the splicing air pressure (Tables 2 and 3).

이론/모형

Cotton fibers were tested for span lengths, uniformity ratio and short fiber content in the Classifiber KCF/LS from Keisokki, Japan. Fiber fineness was measured using air-flow method and the fiber bundle strength was evaluated using Stelometer. Fiber-to-fiber friction was measured by a fiber friction tester using fringe method.
Fiber fineness was measured using air-flow method and the fiber bundle strength was evaluated using Stelometer. Fiber-to-fiber friction was measured by a fiber friction tester using fringe method. The detail test results are given in Table 1.
The flexural rigidity of the yams and the splice portions was measured by the ring loop method [13]. A ring of known circumference (L) was deflected under a constant load (M) and the position of each loop was observed before and after loading.

참고문헌 (13)

W. Walton, International Textile Bulletin, 13(1), 14 (1984)
J. Rohner, Melliand Textileberichte (Eng. Ed.), May, 284 (1984)
O. Bissmen, International Textile Bulletin, 4, 281 (1981)
H. L. Lam and K. P. S. Cheng, Textile Asia, 7, 66 (1997)
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma, Text. Res. J., 58(5), 263 (1988)

상세보기
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma, Text. Res. J., 58(6), 343 (1988)
R. C. D. Kaushick, P. K. Hari, and I. C. Sharma, Text. Res. J., 57(8), 490 (1987)

상세보기
R. Mashaly, E. El-Helw, and K. Akl, Indian Text. J., 60, 1990
K. P. S. Cheng, K. K. Chan, Y. L. How, and H. L. I. Lam, Textile Asia, 28(5), 45 (1997)

상세보기
K. P. S. Cheng and H. L. I. Lam, Text. Res. J., 70(3), 243 (2000)

상세보기
K. P. S. Cheng and H. L. I. Lam, Text. Res. J., 70(12), 1053 (2000)

상세보기
G. E. P. Box and D. W. Behnken, Technometrics, 2, 455 (1960)

상세보기
J. D. Owen and G. Riding, J. Text. Inst., 55, T414 (1964)

상세보기

원문 URL 링크

DOI : 10.1007/BF02875576 [무료]
Springer : 저널
AccessON : 저널

*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.

오픈액세스(OA) 유형

GOLD(Hybrid)

저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문

이 논문과 함께 이용한 콘텐츠

[논문] Study on Splicing Performance of Different Types of Staple Yarns

내보내기 메뉴

내보내기 구분

파일저장
인쇄
메일전송

구성항목

기본정보
상세정보

관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관

저장형식

Text(ASCII format)
Excel format
RefWorks Direct Export
RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley

메일정보

받는사람 (필수): @
보내는사람 (선택): @
제목
내용: KISTI 검색결과 이메일 서비스

안내

총 건의 자료가 검색되었습니다.

다운받으실 자료의 인덱스를 입력하세요. (1-10,000)

검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다.

데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요)

다운로드 파일은 UTF-8 형태로 저장됩니다.
파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오.

Text(ASCII format)
Excel format

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

AI-Helper ※ AI-Helper는 을 사용합니다.

AI-Helper

안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

연합인증