$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

적층단면법에 의한 철근콘크리트 보 해석에서의 부착슬립효과
Implementation of Bond Slip Effect in Analysis of RC Beams Using Layerd Section Method 원문보기

한국전산구조공학회논문집 = Journal of the computational structural engineering institute of Korea, v.19 no.1 = no.71, 2006년, pp.1 - 13  

김진국 (한국과학기술원 건설 및 환경공학과) ,  곽효경 (한국과학기술원 건설 및 환경공학과)

초록
AI-Helper 아이콘AI-Helper

이 논문에서는 적층단면법에 기초하여 단조하중 또는 반복하중을 받는 철근콘크리트 보 및 기둥 부재의 비선형 해석모델이 제안되었다. 완전부착 가정을 토대로 하고 있는 적층단면법은 콘크리트와 철근 사이의 부착슬럽 거동을 고려하지 못한다는 고전적 비선형 해석법과는 달리, 균열 발생시 철근을 따라 발생되는 부착슬립 거동을 힘의 평형관계와 변위의 적합조건으로 정량화하고, 그 결과로부터 철근의 강성을 보정해줌으로써 반영하도록 하였다. 이는 적층단면법에서 추가 자유도(double node)를 도입하지 않고 부착슬립효과를 고려할 수 있다는데 그 의의를 둘 수 있을 것이다. 나아가 제안된 방법에 의한 해석결과와 실험결과와의 비교를 통해, 제안된 방법은 부착슬립 거동에 의한 강성저하(stiffness degradation)를 동반하는 철근콘크리트 보 및 기둥 부재의 균열거동을 효과적으로 고려할 수 있음을 검증하였다

Abstract AI-Helper 아이콘AI-Helper

An analytical procedure to analyze reinforced concrete(RC) beams and columns subject to monotonic and cyclic loadings is proposed on the basis of the layered section method. In contrast to the classical nonlinear approaches adopting the perfect bond assumption, the bond slip effect along the reinfor...

주제어

참고문헌 (33)

  1. 건설교통부(1999) 콘크리트구조설계기준, 한국콘크리트학회 

  2. 곽효경, 김선필(2000) 모멘트-곡률 관계에 기초한 반복하중을 받는 철근콘크리트 보의 비선형 해석, 한국전산구조공학회, 13(2), pp.245-256 

  3. 곽효경, 김선필(2001) 반복하중을 받는 RC기둥의 비선형 해석을 위한 휨모멘트-곡률 관계의 개발, 대한토목학회, 21(6-A), pp.957-966 

  4. 곽효경, 김진국(2001) 철근콘크리트 장주의 극한저항력, 대한토목학회, 21 (3-A), pp.413-424 

  5. Bazant, Z.P., Oh, B.H.(1984) Deformation of Progressively Cracking Reinforced Concrete Beams, ACI, 81 (3), pp.268-278 

  6. Belarbi, A., Hsu, T.T.C.(1994), Constitutive Laws of Concrete in Tension and Reinforcing Bars Stiffened by Concrete, ACI Structural Journal, 91(4), pp.465-474 

  7. Bertero, V.V., Liao, H., Bresler, B. (1969) Stiffness Degradation of Reinforced Concrete, Earthquake Engineering Research Center Report No. EERC 69/12, Univ. of California, Berkeley, California 

  8. Chen, W.F. (1982) Plasticity in Reinforced Concrete, McGraw-Hill Book Company, 1982 

  9. Clough, R.W., Johnston, S.B.( 1966) Effect of Stiffness Degradation on Earthquake Ductility Requirments, Proceedings of Japan Earthquake Engineering Symposium, October 

  10. Comite Euro-International du Beton(1990) CEB-FIP Model Code 1990 First Draft, CEB, Bulletin d'Inforrnation 195, Paris 

  11. Eligehausen, R., Popove, E.P., Bertero, V.V. (1983) Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations, Earthquake Engineering Research Center, Report No. UCB/EERC 83/23, University of California, Berkeley, California 

  12. Filippou, F.C.. Popov, E.P.. Bertero, V.V.(1983) Effects of Bond Deterioration on Hysteretic Behavior of Reinfroced Concrete Joints, Earthquake Engineering Research Center, Report UCB/EERC-83/19, University of California, Berkeley, California 

  13. Karson, I.D., Jirsa, J.O.(1969) Behavior of Concrete under Compressive Loading, Journal of the Structural Division, 95(December) 

  14. Kim, J.K., Lee, S.S.(2000) The behavior of Reinforced Concrete Columns Subjected to Axial Force and Biaxial Bending, Engineering Structures, 23, pp. 1518-1528 

  15. Kwak, H.G., Filippou, F.C.(1990) Finite Element Analysis of Reinforced Concrete Structures under Monotonic Loads, Report No. UCB/SEMM-90/14, Univ. of California, Berkeley, California 

  16. Kwak, H.G,. Kim, S.P.(2002) Cyclic Moment-Curvature Relation of an RC Beam, Magazines of Concrete Research. 54(6), pp. 435-447 

  17. Kwak, H.G., Kim, S.P., Kim, J.E.(2004) Nonlinear Dynamic Analysis of RC Frames using Cyclic Moment-Curvature, Structural Engineering and Mechanics, 17(3-4), pp. 357-378 

  18. Low, S.S., Moehle, J.P., (1987) Experimental Study of Reinforced Concrete Columns Subjected to Multi-Axial Cyclic Loading, Earthquake Engineering Research Center, Report No. EERC 87/14, Univ. of California, Berkeley, California 

  19. Ma, S.M., Bertero, V.V., Popov, E.P.(1976) Experimental and Analytical Studies on the Hysteretic Behavior of Reinforced Concrete Rectangural and T-beam. Earthquake Engineering Research Center, Report No: EERC 76/2, Univ. of California, Berkeley, California 

  20. Menegotto, M., Pinto, P.E. (1973) Method of Analysis for Cyclically Loaded Reinforced Concrete Plane Frame Including Changes in Geometry and Nonelastic Behavior of elements under Combined Normal Force and Bending, Proceedings of IABSE Symposium on Resistance and ultimate Deformebility of Structures Acted on by Well Defined Repeated Loads, Lisbon 

  21. Park, R., Paulay, T.(1975) Reinforced Concrete Structures, John Wiley & Sons, New York 

  22. Pinto, P.E., Giuffre, A.(1970) Comportamento del Cemento Armato per Sollecitazioni Cicliche di Forte Intensita. Giornale del Genio Civile, 5 

  23. Rehm, G.(1961) Uber die Grundlagen des Verbundes zwischen Stahl und Beton, Deutscher Ausschuss fur stahlbeton. 138 

  24. Roufaiel, M.S.L., Meyer, C. (1987) Analytical Modeling of Hysteretic Behavior of R/C Frames, Journal of Structural Engineering. 113(3). pp. 429-444 

  25. Sawyer, H.A.(1964) Design of Concrete Frames for Two Failure States. Proceedings of the International Symposium on the Flexural Mechanics of Reinforced Concrete. ASCE-ACI. Miami. November, pp. 405-431 

  26. Scott, B.D., Park, R., Priestley, M.J.N.(1982), Stress-Strain Behavoir of Concrete Confined by Overlapping Hoops at Low and High Strain Rates. ACI, 79(1), pp. 13-27 

  27. Shima, H., Chou, L., Okamura, H.(1987), Micro and Macro Model for Bond Behavior in RC, Journal of the Faculty of Engineering, The Unisversity of Tokyo(B), 39(2), pp.133-194 

  28. Shin, H., Maekawa, K.. Okamura, H.(1988) Analytical Approach of RC Members Subjected to Reversed Cyclic in-Plane Loading, Proceeding of JCI Colloquium on Ductility of Concrete Structure and its Evaluation, pp. 245-256 

  29. Spacone, E., Limkatanyu, S. (2000) Responses of Reinforces Concrete Members Including Bond-Slip Effects. ACI Strucutral Journal, 97(6). pp. 831-839 

  30. Stevens, N.J., Uzumeri, S.M., Collins. M.P., Will, G.T.(1991) Constitutive Model for Reinforced Concrete Finite Element Analysis. ACI Strucutural Journal, 88(1). pp. 49-59 

  31. Takeda, T., Sozen, M.A., Nielsen, N.N.(1970) Reinforced Concrete Response to Simulated Earthquake, Journal of the Structural Division. ASCE, 96(ST-12), pp. 2557-2573 

  32. Vecchio, F.J. (1999) Towards cyclic load modeling of reinforced concrete. ACI Structural Journal, 96, pp. 193-202 

  33. Wight, J.K., Sozen, M.A.(1975) Strength Decay of RC Columns under Shear Reversals. Journal of the Structural Division, 101(ST5), pp. 1053-1065 

저자의 다른 논문 :

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로