최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기KSTLE international journal, v.7 no.1, 2006년, pp.22 - 26
Kim Jin-Taek (Department of Precision Mechanical Engineering, Chonbuk National University) , Pak Bock-Choon (School of Mechanical & Aerospace Engineering, Chonbuk National University) , Lee Cheul-Ro (School of Advanced Materials Engineering, Chonbuk National University) , Baek B.J. (School of Mechanical & Aerospace Engineering, Chonbuk National University)
A simple finite element analysis is performed to simulate the thermal characteristics of a micro sensor package with thin film heater embedded in the glass wall of a micro-channel. In this paper, Electric characteristics of ITO sputtered heater were presented in this study, which can be used as a ma...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Nguyen, N. T., Wereley, S. T., 'Fundamentals and Applications of Microfluidics,' Artech House, INC., 2002
DeVeo, D. L., 'Thermal Issues in MEMS and Microscale Systems,' IEEE Transactions On Components And Packaging Technologies, Vol. 25, No.4, pp. 576-583, 2003
Lin, Y. C., Yang, C. C, Huang, M. Y., 'Simulation and experimental validation of micro polymerase chain reaction chips,' Sensors And Actuators B 71, pp. 127-133,2000
Zou, Z. Q., Chen, X, Jin, Q. H., Yang, M. S., Zhao, J. L., 'A novel miniaturized PCR multi-reactor array fabricated using flipchip bonding techniques,' J. Micromech. Microeng. 15, pp. 1476-1481,2005
Yang, M., Pal, R., Burns, M. A., 'Cost-effective thermal isolation techniques for use on microfabricated DNA amplification and analysis devices,' J. Micromech. Microeng. 15, pp. 221-230, 2005
Edwards, T. L., Gale, B. K., Frazier, A. B., 'A Micromachined Therrnal Field-Flow Fractionation System,' in Proc. of Transducers '99, pp. 742-745, 1998
Elwenspoek, M., Wiegerink, R., 'Mechanical Microsensors,' Springer
Qiu, L., Hein, S., Obermeier, E., Schubert, A., 'Micro gas-flow sensor with integrated heat sink and flow guide,' Sensors and Actuators A 54, pp. 547-551, 1996
van der Wiel, A. J., Linder, C., de Rooij, N. E, Bezinge, A., 'A liquid velocity sensor based on the hot-wire principle,' Sensors and Actuators A, 37-38, pp. 693-697, 1993
Kersjes, R., Liebscher, E, Spiegel, E., Manoli, Y., Mokwa, W., 'An invasive catheter flow sensor with on-chip CMOS readout electronics for the on-line determination of blood flow,' Sensors and Actuators A 54, pp. 563-567, 1996
Lammerink, T. S. J., Tas, N. R., Elwenspoek, M., Fluitman, J. H. J., 'Micro-liquid flow sensor,' Sensors and Actuators A, 37-38, pp.45-50, 1993
Gaitan, M., Locascio, L. E., 'Embedded Micro-Heating Elements in Polymeric Micro-Channels for Temperature Control and Fluid Flow Sensing,' J. Res. Natl. Inst. Stand. Technol. 109, pp. 335344,2004
Narshimha Rao, K., 'Preparation of transparent conductive oxide films by activated reactive evaporation,' OPT. Eng. 41 (11), pp. 2705-2706., 2002
COMSOL Multi-physics 3.2 user's guide 2005
A. M. Christensen, D. A. Chang-Yen, B. K. Gale, 'Characterization of interconnects used in PDMS microfluidic systems,' J. Micromech. Microeng. 15, pp. 928-934, 2005
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.