$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

고출력 CW Nd:YAG 레이저를 이용한 저탄소 냉연강판 절단시 모서리부 절단 특성 분석

Investigation of Cutting Characteristics in the Sharp Edge for the Case of Cutting of a Low Carbon Steel Sheet using High-power CW Nd:YAG Laser

Abstract

The objective of present research works is to investigate the effects of process parameters, including the power of laser, cutting speed, material thickness, and the edge angle, on the melted area in the sharp edge of the cut material fur the case of cutting of a low carbon steel sheet using high-power CW Nd:YAG laser. In order to investigate the influence of edge angle and size of loop on the melted area in the sharp edge, angular cutting tests and loop cutting tests have been carried out. From the results of angular cutting tests, the relationship between the edge angle and the melted area has been obtained. The results of the experiments have been shown that the melted area is rapidly reduced from $120^{\circ}$ of the edge angle and the melted area is nearly zero at $150^{\circ}$ of the edge angle. Through the results of loop cutting experiments, the relationship between the cutting angle on the melted area in the edge according to the size of loop have been obtained. In addition, it has been shown that a proper size of loop is nearly 3 mm as the corner angle is greater than $90^{\circ}$ and 5 mm as the comer angle is less than $90^{\circ}$. The results of above experiments will be reflected on the knowledge base to generate optimal cutting path of the laser.

저자의 다른 논문

참고문헌 (14)

  1. J.K. Larsson : The Mature Technique of Laser Processing in Body Manufacture - Long Term Production Experience and Recent Development, Proceedings of the LANE 2001, (2001), 55-74 
  2. J. H. Lee, J. Suh, H. K. Sohn and D. S Shin : Trends in Micromachining Technology Using Ultrashort Pulse Lasers, Journal of KWS, 24-1 (2006), 26-32 (in Korean) 
  3. D. G. Ahn and M. S. Kim : A Study on Heat Transfer Characteristics of Laser Cutting for the CSP 1N Sheet Using High-power CW Nd:YAG Laser, Journal of the Korean Society of Manufacturing Process Engineers, 5-1 (2006), 51-58 (in Korean) 
  4. C. Karatas, O. Keles, I. Uslan and Y. Usta : Laser Cutting of Steel Sheets ; Influence of Workpiece Thickness and Beam Waist Position on Kerf Size and Stria Formation, Journal of Materials Processing Technology, 172 (2006), 22-29 
  5. K. Abdel Ghany and M. Newishy : Cutting of 1.2 mm Thick Austenitic Stainless Steel Sheet Using Pulsed and CW Nd:YAG Laser, Journal of Materials Processing Technology, 168 (2005), 438-447 
  6. B. H. Zhou and S. M.. Mahdavian : Experimental and Theoretical Analyses of Cutting Nonmetallic Materials by Low Power $CO_2$-Laser, Jounral of Materials Processing Technology 
  7. D. G. Ahn, M. S. Kim, S. H. Lee, H. J. Park and Y. T. Yoo : Influence of Process Parameters on the Kerfwidth for the case of Laser Cutting of CSP 1N Sheet Using High Power CW Nd:YAG Laser, Journal of Korean Society of Precision Engineering, 22-7 (2005), 19-26 (in Korean) 
  8. H. S. Choi, S. H. Lee, D. G. Ahn, D. Y. Yang, D. S. Park and H. C. Chae : Development of Algorithms for Accuracy Improvement in Transfer-Type Variable Lamination Manufacturing Process Using Expandable Polystyrene Foam, Transaction of the Society of CAD/CAM Engineers, 8-4 (2003), 212-221 (in Korean) 
  9. 김도훈 : 레이저 가공학, 경문사, 2002, 279-294 (in Korean) 
  10. G. C. Han and S. J. Na : A Study on Torch Path Planning in Laser Cutting Processes Part 1 : Calculation of Heat Flow in Contour Laser Beam Cutting, Journal of Manufacturing Processes, 1-1 (1999), 54-61 
  11. D. G. Ahn, M. S. Kim, H. J. Park and Y. T. Yoo : Influence of Process Parameters on Surface Roughness and the Striation Formation of the Cut Section for the Case of Cutting of CSP 1N Sheet Using High Power CW Nd:YAG Laser, Journal of Korean Society of Precision Engineering, 23-7 (2006), 30-38 (in Korean) 
  12. R. Wollermann-Windgasse and C. Schinzel : Laser Technology in Manufacturing-State of the Art at the Beginning of the 21st Century, Proceedings of the LANE 2001, (2001), 87-102 
  13. J.F. Ready : Industrial Applications of Laser, Academic Press, 1997, 315-417 
  14. M. Geiger : Manufactureing Science-Driving Force for Innovation, Advanced Technology of Plasticity, 1 (2002), 17-30 

이 논문을 인용한 문헌 (0)

  1. 이 논문을 인용한 문헌 없음

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일