• 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보


The model exchange from CAD system to CAE system in valid and effective manner is the major issue of automatic analysis modelling of ship structure. However, model exchange approaches based on the neutral CAD file have resulted in invalid model exchange that could not properly reflect the characteristics of CAD model and CAE model of ship structure. This paper presents the new approach of n-to-n mapping to exchange ship structure model in heterogeneous CAD/CAE environments. In this study, the common model called 'unified ship model for analysis' to directly extract proper information from different CAD systems for ship structural analysis is proposed. Moreover, a command language based model interfacing technique to construct an idealized model for analysis job is also proposed. The proposed approach has been actually implemented in DSME CAD/CAE environment of ship structure such as TRIBON system, PATRAN system and FLUENT system. The applicability and effectiveness of the proposed approach was verified by applying it to the real analysis project for fore-body of ship and block lifting. This application results show that the proposed approach can be effectively used for heterogeneous CAD/CAE environment.

참고문헌 (20)

  1. Jang, B. S., Y. S. Suh, E. K. Kim, T. H. Lee, K. B. Jang and M. S. Chun. 2004. Development of integrated structural analysis system including automatic modeller for cargo hold and whole ship model. Proceedings of annual autumn meeting, Society of Naval Architecture of Korea 
  2. Dey, S., M. S. Shepard and M. K. Georges. Elimination of the adverse effects of small model features by local modifications of automatically generated meshs. Engineering with Computers, 13, 134-152 
  3. Kim, I. I. 2006. A development of data structure and mesh generation algorithm for whole ship analysis modelling system. Advances in Engineering Software, 37, 85-96 
  4. Kim, I. I. and W. J. Lee. 2005. A design knowledge based mesh generation algorithm and data structure for whole ship analysis. presenting, CAD 05', Bangkok, Thailand 
  5. Kwon, J. C., H. Y. Kang, O. J. Hu and J. S. Kim. 2001. CAD/CAE interface and automesh generation for ship structure. proceedings, Korean Society of CAD/CAM Engineers 
  6. Merazzi, S., E. A. Gerteisen and A. Mezentsev. 2000. A generic CAD-mesh Interface. 9th International Meshing Roundtable, New Orleans, Louisiana 
  7. Owen, S. J. and D. R. White. 2001. Mesh-based geometry: A systematic approach to constructing geometry from a finite element mesh. 10th International Meshing Roundtable, Newport Beach, California 
  8. Shepard, M. S. 2000. Meshing environment for geometry based analysis. International Journal for Numerical Analysis in Engineering, 47, 169-190 
  9. Kim, S. H., K. P. Park, S. M. Kim, I. I. Kim, J. H. Yeon and S. H. Ha. 2005. Development of a crane lifting simulation system based on CAD/ERP/CAE environment. ICCAS 
  10. Walsh, J. L. 1993. Exposing the Myths of Design to Analysis Data Exchange. Proc. ABAQUS User's Conference 
  11. Mezentsev, A. A. and T. Woehler. 1999. Methods and algorithms of automated CAD repair for incremental surface meshing. 8th International Meshing Roundtable, South Lake Tahoe, California 
  12. Budin, G., C. Stops. 1996. CAD Data Repair. 5th International Meshing Roundtable, Pittsburgh, Pennsylvania 
  13. Lee, C.K. 2003. Automatic metric 3-D surface mesh generation using subdivision surface geometry model. Part 1: Construction of underlying geometric model. International journal for numerical method in Engineering. 56, 1593-1514 
  14. Tautges, T. J. 2000. The common geometry module(CGM):A generic, extensible geometry interface. 9th International Meshing Roundtable, New Orleans, Louisiana 
  15. Moon, D. H., S.H. Han, J. H. Kim and Y. C. Oh. 2003. A set of standard modeling commands for the history-based parametric approach. Computer Aided Design, 35, 1171-1179 
  16. Ribo, R., G. Bugeda and E. Onate. 2002. Some algorithms to correct a geometry in order to create a finite element mesh. Computer and Structures, 80, 1399-1408 
  17. Lee, K. Y., I. I. Kim, D. Y. Cho and T. W. Kim. 2003. An algorithm of automatic 2D quadrilateral mesh generation with line constraints. Computer Aided Design, 35, 1055-1068 
  18. Mark, W. B., W. Joe and S. S. Mark. 2003. Accessing CAD Geometry for Mesh Generation. 12th International Meshing Roundtable, Sante-Fe, New Mexico 
  19. Shepard, M.S., M. W. Beall and R. M. O'Bara. 1998. Revisiting the elimination of the adverse effects of small model features in automatically generated meshes. 7th International Meshing Roundtable, Dearborn, Michigan 
  20. Cirak, F., M. Ortiz and Schroder. 2000. Subdivision surfaces: a new paradigm for thin shell finite-element analysis. International journal for numerical method in Engineering, 47, 1039-2072 

이 논문을 인용한 문헌 (1)

  1. Cheon, Sanguk ; Lee, Jae-Jun ; Cho, Min-Cheol ; Lee, Kwang 2013. "A Method for Translating Pipe Models from Aveva Marine to SmartMarine3D" 한국CAD/CAM학회논문집 = Transactions of the Society of CAD/CAM Engineers, 18(5): 329~337 


원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

DOI 인용 스타일