$\require{mediawiki-texvc}$
  • 검색어에 아래의 연산자를 사용하시면 더 정확한 검색결과를 얻을 수 있습니다.
  • 검색연산자
검색연산자 기능 검색시 예
() 우선순위가 가장 높은 연산자 예1) (나노 (기계 | machine))
공백 두 개의 검색어(식)을 모두 포함하고 있는 문서 검색 예1) (나노 기계)
예2) 나노 장영실
| 두 개의 검색어(식) 중 하나 이상 포함하고 있는 문서 검색 예1) (줄기세포 | 면역)
예2) 줄기세포 | 장영실
! NOT 이후에 있는 검색어가 포함된 문서는 제외 예1) (황금 !백금)
예2) !image
* 검색어의 *란에 0개 이상의 임의의 문자가 포함된 문서 검색 예) semi*
"" 따옴표 내의 구문과 완전히 일치하는 문서만 검색 예) "Transform and Quantization"
쳇봇 이모티콘
안녕하세요!
ScienceON 챗봇입니다.
궁금한 것은 저에게 물어봐주세요.

논문 상세정보

유한요소법을 이용한 초음파 진동 공구혼 설계에 관한 연구

Design of Ultrasonic Vibration Tool Horn for Micromachining Using FEM

Abstract

Conical horn is used in many high frequency ultrasonic horns, to achieve a longitudinal vibration mode across a wide ultrasonic tool horn output surface. Modal analysis is method for designing tuned ultrasonic tool horn and for the prediction natural frequency of ultrasonic tool horn vibration mode. The design of ultrasonic horn is based on prototype estimate obtained by FEM analysis. The FEM simulated ultrasonic tool horn is built and characterized experimentally through laser vibrometer and electrical impedance analysis. In this paper, FEM analysis is developed to predict the natural frequency of ultrasonic tool horn and use of in the optimal design of ultrasonic horn shape.

저자의 다른 논문

참고문헌 (9)

  1. Choi, H. J., 1996, Development of ultrasonic machine, Korea Institute of industrial Technology, pp. 31-36 
  2. Lee, S. W. and Choi, H. Z., 2001, "A Study on the micro ultrasonic machining using ultrasonic vibrator," Advances in Abrasive Technology, pp. 969-972 
  3. Choi, I. H. and Kim, J. D.,1996, "Characteristics of chip generation with ultrasonic vibration cutting in the extremely low cutting velocity," Transaction of KSME, Vol. 21, pp. 655-662 
  4. Kang, J. H., 1996, "A Study on an ultrasonic vibration Assisted Grinding for Ceramics," Transaction of KSME, Vol. 4, No. 5, pp. 37-48 
  5. Amin, S. G., M. H., Ahmed, M., and Youssef, H. A., 1995, "Computer-aided design of acoustic horns for ultrasonic machining using finite-element analysis," Journal of Materials Processing Technology, Vol. 55, pp. 254-260 
  6. Ensminger, D., 1960, "Solid Cone in Longitudinal Half-Wave Resonance," Journal of the Acoustical Society of America, Vol. 32, No. 2, pp. 194-206 
  7. Koenig, W., Dauw, D. F., Levy, G., and Panten, U., 1998, "DM future steps towards the machining of ceramics," Annals of the CIRP, Vol. 37, No. 1, pp 623-631 
  8. Copley, S. M., 1985, Handbook of High speed Machining Technology, Chapman and Hall, New York, pp. 1771-1775 
  9. Pei, Z. J., Kapoor, P. M., and Haselkorn, S. G., 1995, "Rotary ultrasonic machining for face milling of ceramics," International Journal Machine Tools Manufacture, Vol. 35, pp. 1033-1046 

이 논문을 인용한 문헌 (12)

  1. Back, Si-Young ; Jang, Sung-Min 2010. "One-wave Step Horn Design for Ultrasonic Machining for Metal Welding" 한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, 11(12): 4735~4741 
  2. Kim, Eun-Mi ; Jang, Ho-Su ; Park, Dong-Sam 2010. "A Horn of Half-wave Design and Manufacture for Ultrasonic Metal Welding" 한국공작기계학회지 = Journal of the Korean society of machine tool engineers, 19(6): 790~796 
  3. Lee, Jung-Hyun 2010. "A Study on Instrument Panel Welding by Ultrasonic-Waves for Automotive Interior Applied Emotional Design" 한국공작기계학회지 = Journal of the Korean society of machine tool engineers, 19(2): 260~266 
  4. Seo, Jeong-Seok ; Park, Dong-Sam 2010. "Establishment of Conditions for Ultrasonic Welding of Cu sheet" 한국공작기계학회지 = Journal of the Korean society of machine tool engineers, 19(2): 282~287 
  5. Lee, K.H. ; Kim, B.M. 2010. "Design and Manufacture of Ultrasonic Vibration Drawing Tool" 소성가공 = Transactions of materials processing : Journal of the Korean society for technology of plastics, 19(6): 363~371 
  6. Ha, Chang Yong ; Lee, Soo Il 2013. "2D and 3D Topology Optimization with Target Frequency and Modes of Ultrasonic Horn for Flip-chip Bonding" 한국소음진동공학회논문집 = Transactions of the Korean society for noise and vibration engineering, 23(1): 84~91 
  7. Lee, DongWook ; Jeon, EuySick 2013. "The optimization of processing condition of dissimilar material bonding using the 60 kHz ultrasonic transducer" 한국산학기술학회논문지 = Journal of the Korea Academia-Industrial cooperation Society, 14(3): 991~996 
  8. Lee, Bong-Gu ; Oh, Myung-Seok ; Ma, Jeong-Beom 2013. "Design of Ultrasonic Tool Horn for Wire Wedge Bonding" 한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, 22(4): 717~722 
  9. Kim, Kyeong Tae ; Hong, Yun Hyuck ; Park, Kyung Hee ; Lee, Seok Woo ; Choi, Hon Zong ; Choi, Young Jae 2013. "Development of Ultrasonic Grinding Wheel for Hybrid Grinding System" 한국정밀공학회지 = Journal of the Korean Society of Precision Engineering, 30(11): 1121~1128 
  10. Kim, Kyeong Tae ; Hong, Yun Hyuck ; Park, Kyung Hee ; Lee, Seok Woo ; Choi, Hon Zong ; Choi, Young Jae 2013. "Development of Ultrasonic Grinding Wheel for Hybrid Grinding System" 한국정밀공학회지 = Journal of the Korean Society of Precision Engineering, 30(11): 1121~1128 
  11. Kim, Young Woo ; Yim, Vit ; Han, Daewoong ; Lee, Seung-Yop 2014. "Vibration Characteristics of a Wire-Bonding Ultrasonic Horn" 大韓機械學會論文集. Transactions of the Korean Society of Mechanical Engineers. A. A, 38(2): 227~233 
  12. Jang, Ho Su ; Kang, Eun Ji ; Park, Dong Sam 2014. "Area of Horn's Tip and Weldability of Cu Sheets" 한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, 23(2): 173~177 

원문보기

원문 PDF 다운로드

  • ScienceON :

원문 URL 링크

원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다. (원문복사서비스 안내 바로 가기)

상세조회 0건 원문조회 0건

이 논문과 연관된 기능

DOI 인용 스타일