$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Laser Ablation of Polypropylene Films using Nanosecond, Picosecond, and Femtosecond Laser

Journal of the Optical Society of Korea, v.12 no.1, 2008년, pp.38 - 41  

Sohn, Ik-Bu (Precision Optics Lab., Advanced Photonics Research Institute) ,  Noh, Young-Chul (Precision Optics Lab., Advanced Photonics Research Institute) ,  Kim, Young-Seop (Precision Optics Lab., Advanced Photonics Research Institute) ,  Ko, Do-Kyeong (Precision Optics Lab., Advanced Photonics Research Institute) ,  Lee, Jong-Min (Precision Optics Lab., Advanced Photonics Research Institute) ,  Choi, Young-Jin (Daerung Packaging Industry)

Abstract AI-Helper 아이콘AI-Helper

Precise micropatterning of polypropylene film, which is highly transparent in the wavelength range over 250 nm has been demonstrated by 355 nm nano/picosecond laser and 785 nm femtosecond laser. Increments of both the pulse energy and the shot number of pulses lead to cooccurrence of photochemical a...

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

  • The processes during the focused irradiation of femtosecond pulses were observed through a CCD camera mounted upon the microscope. For further investigation, the pulse number N was varied by using a synchronized pulse switching system, which consists of a synchronizing device and a Pockels-cell (Lasermetrics 5100EW 5 kHz).
  • Polypropylene (PP) has been widely used in the packaging industry because of its highly adaptable properties and good thermal stability, chemical resistance, physiological compatibility. In this paper, we compared a 785 nm femtosecond laser with 355 nm nanosecond and picosecond laser for ablating polypropylene film, and experimentally observed the ablation depths and widths for various pulse energies and pulse numbers.

대상 데이터

  • Oriented polypropylene (OPP) films with the thickness of 30 m were prepared. A nanosecond laser (8 ns, Quantel, Brilliant b) and a picosecond laser (30 ps, EKSPLA, PL2143) were used as a light source for ablation of OPP films.
  • The beam has a wavelength of fundamental (1064 nm), second harmonics (532 nm), and third harmonics (355 nm), respectively. The laser pulses were guided into a microscope and focused by an objective lens with the focal length of 100 mm (NA=0.055). The absorption spectrum of OPP film was measured by optical spectrometer.
본문요약 정보가 도움이 되었나요?

참고문헌 (10)

  1. B. N. Chichkov, C. Momma, S. Nolte, F. von Alvensleben, A. Tunnermann, “Femtosecond, picosecond and nanosecond laser ablation of solids,” Applied Physics A, 63, pp. 109-115, 1996 

  2. B. Wolff-Rottke, J. Ihlemann, H. Schmit, A. Scholl, “Influence of the laser-spot diameter on photo-ablation rates,” Applied Physics A, 60, pp. 13-17, 1995 

  3. F. Beinhorn, J. Ihlemann, K. Luther, J. Troe, “Plasma effects in picosecond-femtosecond UV laser ablation of polymers”, Applied Physics A, 79, pp. 869-873, 2004 

  4. M. Okoshi, N. Inoue, “Laser ablation of polymers using 395 nm and 790 nm femtosecond lasers,” Applied Physics A, 79, pp. S395-S398, 2004 

  5. S. Baudach, J. Bonse, W. Kautek, “Ablation experiments on polyimide with femtosecond laser pulses,” Applied Physics A, 69, pp. 748-750, 1999 

  6. Carlos A. Aguilar, Yi Lu, Samuel Mao, Shaochen Chen, “Direct micro-patterning of biodegradable polymers using ultraviolet and femtosecond lasers,” Biomaterials, 26, pp. 7642-7649, 2005 

  7. Y. Feng, Z. Q. Liu, W. S. Yi, “Co-occurrence of photochemical and thermal effects during laser polymer ablation via a 248-nm excimer laser,” Applied Surface Science, 156, pp. 177-182, 2000 

  8. O. Kondo, K. Yamasaki, S. Juodkazis, S. Matsuo, V. Mizeikis, H. Misawa, “Three-dimensional microfabrication by femtosecond pulses in dielectrics,” Thin Solid Films, pp. 453-454, 550-556, 2004 

  9. J. Serbin, A. Ovsianikov, B. Chichkov, “Fabrication of woodpile structures by two-photon polymerization and investigation of their optical properties,” Optics Express, 12(21), pp. 5221-5228, 2004 

  10. Shin Wook Yi, Seong Ku Lee, Hong Jin Kong, “Threedimensional micro-fabrication using two-photon absorption by femtosecond laser,” Proceeding of SPIE, 5342, pp. 137-145, 2004 

저자의 다른 논문 :

관련 콘텐츠

오픈액세스(OA) 유형

BRONZE

출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트