최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국정밀공학회지 = Journal of the Korean Society for Precision Engineering, v.26 no.3 = no.216, 2009년, pp.88 - 97
선현우 (두원공대 메카트로닉스과) , 한범석 (자동차부품연구원) , 유형조 (엠텍) , 정현호 (신창전기)
The vacuum die casting techniques can diminish the porosity of products and provide better surface appearance by the ordinary high pressure die casting process. The vacuum system can also reduce the cold laps in the die casting process and minimize the overflow pockets of the die. The vacuum system ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Hu, B., Xiong, S., Murakami, M., Matsumoto, Y. and Ikeda, S., "Experimental Study of Vacuum Die Casting Process of AZ91D Magnesium Alloy," International Symposium on Magnesium Technology, pp. 51-56, 2006
Lee, T. W., Suh, B. K., Lee, D. M. and Lee, C. H., "Microstructure and Mechanical Properties of Die Cast SICp/Al Alloy Composite," J. of Korean Inst. of Met. and Mater., Vol. 35, No. 3, pp. 359-367, 1997
Kim, S. H., "A Study on the Die Casting of Mg-9Al- 1Zn Alloy for Airbag Case," J. of KSPE, Vol. 19, No. 10, pp. 77-83, 2002
Lim, J. M. and Jang, I. S., "The Strength Analysis of Passenger Car Seat Frame," Transactions of KSAE, Vol. 11, No. 6, pp. 205-212, 2003
Kim, B. K., Kim, M. S., Kim, B. J. and Heo, S. J., "Optimal Design of the Passenger Vehicle Aluminum Seat for Weight Reduction and Durability Performance Improvement," Transactions of KSAE, Vol. 13, No. 3, pp. 58-63, 2005
Song, M. J., Lee, J. J., Ko, B. S. and Shin, M. K., "The Study of Optimization of Car Seat considering the safety of passengers," Proceedings of KSAE Fall Conference, Vol. 2, pp. 1092-1097, 2006
Detailed Regulation for the Application of law, Regulation of Vehicle Safety Standard, Ministry of Land, Transport and Maritime Affairs, Korea
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.