최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조시스템학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.20 no.6, 2011년, pp.714 - 719
류청원 (한국폴리텍 VI대학 컴퓨터응용기계과) , 최성대 (금오공대 기계공학부) , 이순관 (한국폴리텍 VI대학 컴퓨터응용기계과)
The surface roughness depending on the machining method is very important because is produce a finished product through riveting, sealing, bonding, and special paint in order to curb the turbulence and air resistance which occur between the sheets. Aluminum alloy 2024 which is widely used for interi...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
Kim, C. H., and Kang, J. W., 2006, "Machining Characteristics of WEDM due to Electrical Conductivity of Dielectric," Trans. of KSMTE, Vol. 15, No. 6, pp. 15-21.
Bruma, M. M., and Magat, M., 1868, "Lusinage Par Elec-icity," 5E Congress International des Fabrications Mecanigues, No. 57, pp. 125-136.
Kim, S. J., Sung, B. S., Jung, S. T., Ban, J. S., and Cho, G. J., 2002, "A Study on the Selections of Optimized Process Conditions in the Wire Electric Discharge," Proceedings of KSMTE Autumn Conference 2002, pp. 631-636.
Ko, B. D., and Sin, M. C., 2008, "Machining Characteristics of SKS3 in Wire Cut Electrical Discharge Machining," Trans. of KSMTE, Vol. 17, No. 5, pp. 101-106.
Suzuki, M., 1987, "Surface Modification of Metals by E.D.M.," JSPE, Vol. 53, No. 2, pp. 51-57.
Liao, Y. S., Huang, J. T., and Su, H. C., 1997, "A Study on the Machining-Parameters Optimization of Wire Electrical Discharge Machining," J. of Materials Processing Technology, Vol. 71, No. 1, pp. 487-493.
Liao, Y. S., and Woo, J. C., 1997, "The Effects of Machining Setting on the Behavior of Pulse Trains in the Wire-cut E.D.M.. Process," J. of Materials Processing Technology, Vol. 71, No. 1, pp. 433-439.
Dauw, D. F., 1992, "About the Evolution of Wire Tool Performance in Wire E.D.M.," Annals of the CIRP, Vol. 41, No. 1, pp. 221-224.
Dauw, D. F., 1989, "Wire Analysis and Control for Precision E.D.M. Cutting," Annals of the CIRP, Vol. 38, No. 1, pp. 191-194.
Lyu, S. K., and An, S. G., 2004, "A Study of Characteristics of the Wire-cut EDM Process in Aluminum Alloys," Journal of the KOSOS, Vol. 19, No. 2, pp. 21-25.
Kim, G. S., and Jung, P. D., 1998, CNC E.D.M. and Wire-cut E.D.M., Munwondang, Korea, pp. 218-225.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.