최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Korean chemical engineering research = 화학공학, v.50 no.3, 2012년, pp.567 - 573
김복련 (경상대학교 공과대학 생명화학공학과) , 김창우 (경상대학교 공과대학 생명화학공학과) , 서양곤 (경상대학교 공과대학 생명화학공학과) , 이용순 ((주)알앤이)
Compared with the natural marble, the artificial marble has the advantages of excellent appearance, high degree of finish, even color, fine pressure and wear resistance, bear erosion and weathering, etc. It can be widely used in kitchen countertops, bath vanity tops, table tops, furniture, reception...
Ministry of Environment, Generation and Treatment of Waste in Korea in 2006(2007).
Hong, S. and Kim, P. J., "International Restrictions and Counterplans of Brominated Flame Retardants," Prospectives of Industrial Chemistry, 8(6), 3-20(2005).
Shin, D. H., Nho, N.S., Kim, S. S., Kim, K. H. and Jeon S. G., "A Review on R&D and Commercialization of Oil Recovery from Waste Plastics by Pyrolysis," J. Korean Ins. Resources Recycling, 19(1), 3-12(2010).
Jang, D. H., Nam, B. D., Nah, S. K. and Nah, J. W., "Pyrolysis of Waste Marble Powder," Spring conference on The Korean Society of Industrial and Engineering Chemistry, May, Seoul(2007).
Kwak, T. S., Lee, B. J., Yang, Y. K, Choi, J. H. and Kim, H. J., "The R&D Trends of Polymer Flame Retardants," Industrial Chem., 8, 36(2005).
Mok, Y. I., "A Review of the Flame Retardation of Flamable Polymers," Appl. Chem., 15, 211(1977).
Hwang, E. H. and Hwang, T. S., "Comparison of Physical Properties of PAE Polymer-Modified Mortars from Recycled Waste Artificial Marble and Waste Concrete Fine Aggregates," J. Ind. Eng. Chem., 13(4), 585-591(2007).
Hwang, E. H., Ko, Y. S. and Jeon, J. K., "Effect of Polymer Cement Modifiers on Mechanical and Physical Properties of Polymer-Modified Mortar using Recycled Artificial Marble Waste Fine Aggregate," J. Ind. Eng. Chem., 14, 265-271(2008).
Aruntas, H. Y., Guru, M., Dayi, M. and Tekin, I., "Utilization of Waste Marble Dust as an Additive in Cement Production," Mater. Des., 31, 4039-4042(2010).
Box, G. B. P. and Behnken, D. W., "Some New Three Level Designs for the Study of Quantitative Variables," Technometrics, 2(4), 455-475(1960).
Kotlar, C. E., Aguero, M. V. and Roura, S. I., "Simultaneous Optimization of Biomass and Protease Biosynthesis by a Local Isolated Pseudomonas sp. - Response Surface Optimization using Box-Behnken Design," Ind. Biotechnol., 6(6), 364-374(2010).
Grassie, N., "Structural Information from Degradation Studies," Pure Appl. Chem., 54(2), 337-349(1982).
Kaminsky, W. and Eger, C., "Pyrolysis of Filled PMMA for Monomer Recovery," J. Anal. Appl. Pyrolysis, 58-59, 781-787(2001).
Grause, G., Predel, M. and Kaminsky, W., "Monomer Recovery from Alumiun Hydroxide High Filled Poly(methyl methacrylate) in a Fluidized Bed Reactor," 75, 236-239(2006).
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.