최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기電子工學會論文誌. Journal of the Institute of Electronics Engineers of Korea. SC, 시스템 및 제어, v.49 no.4 = no.346, 2012년, pp.61 - 68
남재우 (서울시립대학교 전자전기컴퓨터공학부) , 오준태 (서울시립대학교 전자전기컴퓨터공학부) , 김규식 (서울시립대학교 전자전기컴퓨터공학부)
In this paper, a closed-loop sensorless stroke control system for a linear compressor has been designed. In order to estimate the piston position accurately, motor parameters are identified as a function of the piston position and the motor current. These parameters are stored in ROM table and used ...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
리니어 컴프레서에서 피스톤의 스트로크를 제어할 필요가 있는 이유는? | 리니어 컴프레서에서는 기구적으로 구속되어 있지 않기 때문에 피스톤이 일정한 영역 내에서 안전하게 진동하고 실린더헤드를 때리지 않도록 피스톤의 스트로크를 제어할 필요가 있다. 또한, 냉각을 위한 냉매의 유출율 조절을 위해서도 피스톤의 스트로크 제어가 필요하다. 이를 위해서는 정확한 피스톤의 위치 정보가 필요하다. | |
본 연구에서 모터 매개변수를 피스톤 위치와 모터 전류의 함수로 추정하여 무엇에 샤용하였는가? | 피스톤 위치를 정확히 알아내기 위해 모터 매개변수를 피스톤 위치와 모터 전류의 함수로 추정하였다. 이 매개변수 데이터는 ROM 테이블에 저장한 뒤 차 후 피스톤 위치를 정확히 알아내는데 사용된다. 또한, 추정된 전동기 매개 변수의 데이터 크기를 줄이기 위해 여러 형태의 곡면 함수로 근사화 하는 작업을 수행하였고, 공간분할을 통해 추정오차를 줄일 수 있었다. | |
왕복동식 컴프레서이 리니어 컴프레서와 다른점은? | 그림 1과 같이 기존의 왕복동식 컴프레서에서는 회전하는 로터리 모터의 운동을 크랭크 축에 의해 직선으로 바꾸어 주는 반면, 리니어 컴프레서는 피스톤이 리니어모터에 의해 직접 구동되는 피스톤 타입 컴프레서이다. 리니어 컴프레서에서는 모든 구동 힘이 직선운동 방향으로 가해지기 때문에 피스톤에 의해 측면방향의미는 힘이 발생하지 않는다. |
Reuven Unger, "Linear compressors for non-CFC refrigeration," Proceedings International Appliance Technical Conference (Purdue University, West Lafayette, Indiana, USA), May 13-15, 1996.
Robert Redlich, Reuven Unger, Nicholas van der Walt, "Linear compressors : motor configuration, modulation and systems," Proceedings International Compressor Engineering Conference (Purdue University, West Lafayette, Indiana, USA), July 23-26, 1996.
Reuven Unger, "Linear compressors for clean and specialty gases," Proceedings International Compressor Engineering Conference (Purdue University, West Lafayette, Indiana, USA), July 14-17, 1998.
Reuven Unger, "Development and testing of a linear compressor sized for the european market," Proceedings International Appliance Technical Conference (Purdue University, West Lafayette, Indiana, USA), May 10-12, 1999.
Masayuki Sanada, Shigeo Morimoto, and Yoji Takeda, "Analyses for sensorless linear compressor using linear pulse motor," Proceedings Industry Applications Conference, pp. 2298-2304, Oct., 3-7, 1999.
Yee-Pien Yang and Wei-Ting Chen, "Dual stroke and phase control and system identification of linear compressor of a split-stirling cryocooler," Proceedings Decision and Control, pp. 5120-5124, Dec. 7-10, 1999.
Gye-young Song, Hyeong-kook Lee, Jae-yoo Yoo, Jin-koo Park, and Young-ho Sung, "Development of the linear compressor for a household refrigerator," Proceedings Appliance Manufacturer Conference & Expo, September 11-13, 2000.
유재유, 이철웅, 이재춘, 황민규, 김정철, "리니어 컴프레샤용 LOA의 스트로크 센서 없는 제어 방법" 전력전자학술대회 논문집, pp.650 -656, 2001
Cadman, R. V., "A Technique for the Design of Electrodynamic Oscillating Compressors," Ph.D.Thesis, Purdue Univ, 1967.
B.J. Huang, Y.C. Chen, "System Dynamics and Control of a Linear Compressor for Stroke and Frequency Adjustment," ASME, pp.176-182, 2002. 3.
Tae-Won Chun, Jung-Ryol Ahn, "A Novel Strategy of Efficiency Control for a Linear Compressor System Driven by a PWM Inverter," IEEE, Industrial Electronics, Vol 55, No 1, pp.296-301, 2008. 1.
Zhengyu Lin, Jiabin Wang, "A Learning Feed-Forward Current Controller for Linear Reciprocating Vapor Compressors," IEEE, Industrial Electronics, Vol 58, No 8, 2011. 8.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.