최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기대한치과기공학회지 = The Journal of Korean Academy of Dental Technology, v.35 no.3, 2013년, pp.201 - 207
박수철 (김천대학교 치기공학과) , 김홍식 (김천대학교 치기공학과) , 함성원 (경일대학교 화학공학과)
Purpose: In this study, the loosening torque test was conducted with three implant products that are produced, approved and sold in Korea, which are manufactured in different fixture and abutment tightening methods (internal submerged type, internal morse taper type, and external type) to examine th...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
전통적인 금속의 치과보철재료 대신 티타늄이 사용되기 시작한 이유는 무엇인가? | 치과 보철의 재료로 금속재료가 전통적으로 많이 사용되어져 왔으며, 이러한 금속재료는 니켈(Ni), 크롬(Cr), 코발트(Co), 티타늄(Ti) 등의 비귀금속과 금과 같은 귀금속이 치과보철재료로 이용되었다. 하지만 니켈, 크롬 등의 일부 금속은 부식저항성과 생체적합성의 안정성 문제가 연구보고(Sakong & Park 2013; Park et al., 2012) 되어 임플란트의 소재가 되는 재료는 생체적합성과 부식 저항성이 높은 티타늄이 사용되고 있으며, 그 중 순수 티타늄 Grade 3와 Grade 4, Ti-6Al-4V 합금이 주로 사용된다. 순수 티티늄 Grade 3에 비해 기계적 강도가 우수한 순수 티티늄 Grade 4는 임플란트 고정체와 지대주 제조에 순수 티티늄 Grade 3는 지대주 제조에 주로 사용되고 있으며, 지대주 나사는 티타늄 합금(Ti-6Al-4V)으로 주로 제작한다. | |
임플란트의 단점은 무엇인가? | 치주인대의 완충작용으로 적절한 응력분산이 생기는 자연 치아와는 달리 임플란트는 직접 골에 매식되어 응력분산이 되지 않으며(Holmes et al., 1992), 임플란트는 고정체와 지대주를 지대주 나사를 이용해 결합하기 때문에 잘못된 조임회전력, 교합압과 같은 하중의 발생과 상실, 하중으로 의한 진동, 주변의 인위적인 환경에 의해 지대주 나사 풀림이 발생된다(Jorn ¨ ´eus et al., 1992). | |
치과용 임플란트는 무엇인가? | 이러한 인접 자연치아를 삭제하여 치료하는 방법은 건강한 치아가 손상되는 부작용과 결손부위의 교합력까지 인접치아에 전달되는 단점이 있으며 치아의 수명에도 많은 영향을 미친다. 치과용 임플란트(Implant)는 이러한 치아삭제의 문제를 해결하고 자연치아를 대신하여 고정체(Fixture)를 골 내에 매식하여 고정체에 지대주 (Abutment)를 지대주 나사(Screw)이용하여 고정하고 인공 치아를 지대주에 고정시키는 술식이 임상에서 많이 이용되고 있는 치료방법이다(Kallus et al., 1994). |
Carlson B, Carlsson GE. Prosthodontic complications in osseointegrated dental implant treatment. J Implant Dentistry, 3(4), 264, 1994.
Ekfeldt A. Carlsson GE, Borjesson G. Clinical evaluation of single-tooth restorations supported by osseointegrated implants: a retrospective study. Int J Oral Maxillofac Implants, 9(2), 179-183, 1994.
Hemmings KW, Schmitt A, Zarb GA. Complications and maintenance requirements for fixed prostheses and overdentures in the edentulous mandible: a 5-year report. Int J Oral Maxillofac Implants, 9(2), 191-196, 1994.
Holmes DC, William RG, Vijay KG, John CK. Comparison of stress transmission in the IMZ implant system with polyoxymethylene or titanium intramobile element: a finite element stress analysis. Int J Oral Maxillofac Implants, 7(4), 450-458, 1992.
Jemt T, Pattersson P. A 3-year follow-up study on single implant treatment. J Dent, 21(4), 203-208, 1993.
Jorn'eus L, Jemt T, Carlsson L. Loads and designs of screw joints for single crowns supported by osseointegrated implants. Int J Oral Maxillofac Implants, 7(3), 353-359, 1992.
Kallus T, Bressing C, Odont D. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants, 9(2), 169-178, 1994.
Koak JY, Heo SJ, Chang IT, Yim SH, Lee JY, Lee KR. The study on the removal torque of the diamond like carbon coated titanium abutment screws. J Korean Acad Prosthodont, 41(2), 128-135, 2003.
Park JK, Jeong CM, Jeon YC, Yoon JH. Influence of tungsten carbide/carbon coating of implantabutment screw on screw loosening. J Korean Acad Prosthodont, 46(2), 137-147, 2008.
The performance and stability of the dental implant assessment tests guidelines. Korea Food & Drug Administration, 2006.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.