$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Silane coupling agent인 MPS 농도별처리에 따른 열중합 레진과 자가중합 레진 간의 전단결합강도

Effects of Treatment of Silane Coupling Agent in MPS Concentration on the Shear Bond Strength between Self Curing Resins and Heat Curing Resin

한국콘텐츠학회논문지 = The Journal of the Korea Contents Association, v.15 no.2, 2015년, pp.344 - 351  

최에스더 (혜전대학교 치기공과) ,  권은자 (혜전대학교 치기공과)

초록
AI-Helper 아이콘AI-Helper

본 논문은 치과에서 많이 사용되고 있는 silane coupling agent로 표면 처리한 의치상 레진과 자가중합 레진 간의 전단 결합력에 미치는 영향에 대해 알아보고자 하였다. 의치상 레진에 silane coupling agent 농도별 표면 처리 후 자가중합레진을 주입하여 전단결합강도를 측정하였다. Silane coupling agent(MPS)의 농도별 표면 처리에 따른 의치상 레진과 자가중합레진 간의 전단결합강도에서는 Vertex self curing resin에서 5%, 7%에서 유의적으로 높게 나타났고(P<0.05), Kooliner에서는 5%에서 유의적으로 가장 높게 나타났다(P<0.05). 따라서 의치상 레진과 자가중합레진 사이에 MPS 5%를 이용한 표면처리가 전단결합강도에 효과적으로 영향을 미치는 것이라 사료된다.

Abstract AI-Helper 아이콘AI-Helper

The purpose of this study was to evaluate the effect of the surface treatment of widely used in dental of silane coupling agent concentration on the shear bond strength of denture base resin and self curing resins. Denture base resin surface was treated with silane coupling agent concentration, afte...

주제어

AI 본문요약
AI-Helper 아이콘 AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

문제 정의

  • 따라서 이 연구에서는 유기물과 무기물의 혼합물로 구성되어 있는 silane coupling agent를 표면처리로 이용하여 유기재료와 무기재료의 결합을 도와 의치상 레진과 자가중합레진 간의 결합강도를 증기시킬 수 있는지에 관하여 평가하고자 하였다. Silane coupling agent 중에서 도재 전용 primer로 접착 용매의 역할을 하고[21], 치과용 resin composite에서 많이 사용된 MPS를 농도별로 의치상 레진과 자가중합레진 사이에 표면처리를 하여 의치상 레진과 자가중합레진간의 전단결합 강도를 평가하여 최적의 조건을 찾고자 하였다.
  • 그러나 유기적 용매에 관한 화학적 표면처리로 결합강도를 증진시키기 위한 연구들이 대부분이다. 따라서 이 연구에서는 유기물과 무기물의 혼합물로 구성되어 있는 silane coupling agent를 표면처리로 이용하여 유기재료와 무기재료의 결합을 도와 의치상 레진과 자가중합레진 간의 결합강도를 증기시킬 수 있는지에 관하여 평가하고자 하였다. Silane coupling agent 중에서 도재 전용 primer로 접착 용매의 역할을 하고[21], 치과용 resin composite에서 많이 사용된 MPS를 농도별로 의치상 레진과 자가중합레진 사이에 표면처리를 하여 의치상 레진과 자가중합레진간의 전단결합 강도를 평가하여 최적의 조건을 찾고자 하였다.
  • 본 연구에서는 열중합 의치상용 레진과 자가중합 레진 사이의 결합강도를 강화시키기 위한 표면처리를 알아보기 위하여 열중합 의치상용 레진에 silane coupling agent인 MPS의 1, 3, 5, 7, 10 wt%인 농도별 표면처리를 시행하여 자가중합레진을 주입 후 전단결합강도를 비교하였다.
  • 본 연구에서는 열중합 의치상용 레진과 자가중합레진 사이의 결합강도를 강화시키기 위해 silane coupling agent 중에서 치과에서 보편적으로 사용되는 MPS를 농도별로 제조하여 전단결합강도의 차이를 비교하였다.
본문요약 정보가 도움이 되었나요?

질의응답

핵심어 질문 논문에서 추출한 답변
의치에서 자가중합레진의 이점은? 이러한 문제들을 해결하고 의치의 지지, 안정, 유지의 기능을 좋게 하여 의치와 변화된 잔존치조제의 적합성을 높이기 위해서 이장재로 자가중합레진을 사용한다[3-5]. 의치에서 자가중합레진은 의치와 잔존치 조제가 정확히 적합이 되도록 하여 의치의 지지, 안정, 유지의 기능에 효과적이다[6].
어떤 문제점을 해결하기 위해 이장재로 자가중합레진을 사용하는가? 성공적인 의치를 제작하기 위해서는 적합성이 중요한 요소이다. 그러나 시간이 지남에 따라 잔존치조제가 지속적으로 흡수되어 의치의 적합성이 낮아져 의치의 헐거움, 통증, 저작능률 저하, 심미적 변화 등이 나타난다[1][2]. 이러한 문제들을 해결하고 의치의 지지, 안정, 유지의 기능을 좋게 하여 의치와 변화된 잔존치조제의 적합성을 높이기 위해서 이장재로 자가중합레진을 사용한다[3-5].
의치상 레진과 자가중합레진 사이의 결합강도에 영향을 주는 것은? 따라서 의치상 레진과 자가중합레진의 결합강도를 증진시키는 것이 임상에서 성공적인 이장을 시행할 수 있다[10-12]. 의치상 레진과 자가중합레진 사이의 결합강도는 표면처리, 결합 단면 형태, 결합 시 오염된 상태 등의 영향을 받는다[13]. 이전 연구들에서 의치상 레진과 자가중합레진 사이의 MMA, chloroform, acetone 등의 화학적 표면처리와 표면 거칠기 같은 기계적인 표면처리 등을 사용하여 의치상 레진과 자가중합레진 간의 결합 강도를 증가시키기 위한 연구들이 다수 보고되어 왔다[14-20].
질의응답 정보가 도움이 되었나요?

참고문헌 (36)

  1. S. Sadamori, W. Siswomihardjo, K. Kameda, A. Saito, and T. Hamada, "Dimensional changes of relined denture bases with heat-cured, micro-wavectivated, autopolymerizing, and visible light-cured resins," Aust Dent J, Vol.40, pp.322-326, 1995. 

  2. A. Tallgren, "The continuing reduction of the residual alveolar ridges in complete denture wearers," J Prosthet Dent, Vol.89, pp.427-435, 2003. 

  3. W. M. Murphy, R. Huggett, R. W. Handley, and S. C. Brooks, "Rigid cold curing resins for direct use in the oral cavity," Br Dent J, Vol.160, pp.391-394, 1986. 

  4. Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. 

  5. C. E. Vergani, R. S. Seo, A. C. Pavarina, and J. M. dos Santos Nunes Reis, "Flexural strength of autopolymerizing denture reline resins with microwavepostpolymerization treatment," J Prosthet Dent, Vol.93, pp.577-583, 2005. 

  6. T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. 

  7. R. E. Ogle, S. E. Sorensen, and E. A. Lewis, "A new visible light cured resin system applied to removable prosthodontics," J Prosthet Dent, Vol.56, pp.497-506, 1986. 

  8. C. A. Arena, D. B. Evans, and T. J. Hilton, "A comparison of bond strengths among chairside hard reline materials," J Prosthet Dent, Vol.70, pp.126-131, 1993. 

  9. J. Haywood, R. M. Basker, C. J. Watson, and D. J. Wood, "A comparison of three hard chairside denture reline materials," Eur J Prosthodont Restor Dent, Vol.11, pp.157-163, 2003. 

  10. M. S. Beyli and J. A. von Fraunhofer, "Repair of fractured acrylic resin," J Prosthet Dent, Vol.44, No.4, pp.97-503, 1980. 

  11. M. Berge, "Bending strength of intact and repair ed denture base resins," Acta Odontol Scand, Vol.41, pp.187-191, 1983. 

  12. J. Bunch, G. H. Johnson, and J. S. Brudvik, "Evaluation of hard direct reline resins," J Prosthet Dent, Vol.57, pp.512-519, 1987. 

  13. G. S. Kim, "The effect of denture cleansers on the bond strength and the surface hardness of reline resin to denture base resin," J Korean society Dent Prosthet, Vol.41, No.4, pp.493-502, 2003. 

  14. Arima T. Nikawa H, Hamada, and T, Harsini, "Composition and effect of denture base resin surface primers for reline acrylic resins," J Prosthet Dent, Vol.75, pp.457-462, 1996. 

  15. P. K. Vallittu, V. P. Lassila, and R. Lappalainen, "Wetting the repair surface with methyl methacrylate affects the transverse strength of repaired heat-polymerized resin," J Prosthet Dent, Vol.72, pp.639-643, 1994. 

  16. C. R. Leles, A. L. Machado, C. E. Vergani, E. T. Giampaolo, and A. C. Pavarina, "Bonding strength between a hard chairside reline resin and a denture base material as influenced by surface treatment," J Oral Rehabil, Vol.28, pp.1153-1157, 2001. 

  17. H. Matsumura, N. Tanoue, K. Kawasaki, and M. Atsuta, "Clinical evaluation of a chemically cured hard denture relining material," J Oral Rehabil, Vol.28, pp.640-644, 2001. 

  18. Y. Takahashi and J. Chai, "Assessment of shear bond strength between three denture reline materials and a denture base acrylic resin," Int J Prosthodont, Vol.14, pp.531-535, 2001. 

  19. H. Shimizu, T. Ikuyama, E. Hayakawa, F. Tsue, and Y. Takahashi, "Effects of surface preparation using ethyl acetate on the repair strength of denture base resin," Acta Odontol Scand, Vol.64, pp.159-163, 2006. 

  20. B. Canan, "Flexural properties of repaired heat-polymerising acrylic resin after wetting with monomer and acetone," Gerodontol, Vol.27, pp.217-223, 2010. 

  21. H. Kato, H. Matsumura, T. Ide, and M. Atsuta, "Improved bonding of adhesive resin to sintered porcelain with the combination of acid etching and a two-liquid silane conditione," J Oral Rehabil, Vol.28, pp102-108, 2001. 

  22. T. Ohkubo, M. Oizumi, and T. Kobayashi, "Influence of methylmercaptan on the bonding strength of autopolymerizing reline resins to a heat-polymerized denture base resin," Dent Mater J, Vol.28, pp.426-432, 2009. 

  23. M. Sadakane, T. Tada, S. Ide, M. Nakayama, N. Nishiya, S. Utsumi, Y. Torii, and K. Inoue, "Effect of additional heat cure on mechanical properties of light-cured composite resins; Part 1 Effect of silane treatment of filler," Jpn J Conserv Dent, Vol.35, pp.677-684, 1992. 

  24. G. S. Solnit, "The effect of methacrylate reinforcement with silane treated and untreated glass fibers," J Prosthet Dent, Vol.66, pp.310-314, 1991. 

  25. P. K. Vallittu, "Comparison of two different silane compound used for improving adhesion between fibers and acrylic denture base material," J Oral Rehabil, Vol.20, pp.533-539, 1993. 

  26. R. Newburg and C. H. Pameijer, "Composite resins bonded to porcelain with silane solution," J Am Dent Assoc, Vol.96, pp.288-291, 1978. 

  27. H. Kolodney, A. Puckett, B. Kistenmacher, and D. Weems, "Composite to silane-coated alloy bond strength following gypsum invested heat-processing," J Dent Res, Vol.71, p.278, 1992. 

  28. K. B. May, M. C. Van Putten, D. A. Bow, and B. R. Lang, "4-META polymethylmethacrylate shear bond strength to titanium," Oper Dent, Vol.22, pp.37-40, 1997. 

  29. J. O. Semmelman and P. R. Kulp, "Silane bonding porcelain teeth to actylic," J Am Dent Assoc, Vol.76, p.69, 1968. 

  30. M. W. Daniel and L. F. Francis, "Silane adsorption behavior, microstructure, and properties of glycidoxypropyltrimethoxy silane-modifiedcollo idal silica coatings," J Colloid Interface Sci, Vol.205, pp.191-200, 1998. 

  31. S. K. Brown, "Mechanics of fracture in filled thermosetting resins," Br Polymer J, Vol.12, pp.24-30, 1980. 

  32. N. M. Mohsen and R. G. Craig, "Effect of silanation of fillers on their dispersability by monomer systems," J Oral Rehabil, Vol.22, pp.183-189, 1995. 

  33. J. S. Calais and K. J. M. Soderholm, "Influence of filler type and water, exposure on flexural strength of experimental composite resin," J Dent Res, Vol.67, pp.836-840, 1998. 

  34. R. McMoride and G. E. King, "Evaluation of primers used for bonding silicone to denture base materials," J Prosthet Dent, Vol.61, pp.636-639, 1989. 

  35. K. J. M. Soderholm, "Degradation of glass filler in experimental composites," J Dent Res, Vol.60, pp.1867-1875, 1981. 

  36. International Organization for standardization, ISO 29022. Dentistry-Dentistry-Adhesion-Notched edge shear bond strength test, Geneva: Switzerland, ISO, 2013. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트