최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.9 no.1, 2015년, pp.23 - 26
장민규 (부경대학교 기계공학부) , 조일규 ((주)동명테크) , 이옥성 (플랙스) , 정영득 (부경대학교 기계공학부)
For mass production of plastics, injection molds have multi-cavities. However, filling imbalance between cavity to cavity always has occurred in multi-cavities mold, and this has caused low quality of plastics part. In this study, the closed-loop-control system which can control temperature of hot m...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
J. P. Beaumont, K. Boell, "Controlling Balanced Molding Through New Hot Runner Manifold Designs", ANTEC, pp. 932-936, 2001.
Christopher W, White, "Decelopment of Filling Imbalance in Hot Runner Mold", ANTEC 99, pp. 3672-3676, 1999.
John P. Beaumont and jack H. Young, "Mold Filling Imbalances in Geometrically Balanced Runner Systems", Journal of Injection Molding Technology, Vol 1, No 3, pp. 133-143, 1997.
http://www.wincapa.com
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.