최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Advances in concrete construction, v.5 no.1, 2017년, pp.75 - 86
Ganesan, N. (Department of Civil Engineering Institute, National Institute of Technology Calicut) , Sahana, R. (Department of Civil Engineering Institute, National Institute of Technology Calicut) , Indira, P.V. (Department of Civil Engineering Institute, National Institute of Technology Calicut)
An experimental work was carried out to study the effect of hybrid fiber on the tension stiffening and cracking characteristics of geopolymer concrete (GPC). A total of 24 concentrically reinforced concrete specimens were cast and tested under uniaxial tension. The grade of concrete considered was M...
Abrishami, H.H. and Mitchell, D. (1997), "Influence of steel fibers on tension stiffening", ACI Struct. J., 94(6), 769-775.
Ahmed, S.F.U., Maalej, M. and Paramasivam, P. (2007), "Flexural responses of hybrid steel-polyethylene fiber reinforced cement composites containing high volume fly ash", Constr. Build. Mater., 21(5), 1088-1097.
ASTM (2003), Standard Test Method for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, West Conshohoken, U.S.A.
Bentur, A. and Mindess, S. (1990), Fiber Reinforced Cementitious Composites, Elsevier Applied Science, London, U.K.
BIS (1970), Indian Standard Code of Practice for Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, New Delhi, India.
Bischoff, P.H. (2003), "Tension stiffening and cracking of steel fiber reinforced concrete", J. Mater. Civil Eng., 15(2), 174-182.
Davidovits, J. (1991), "Geopolymers: Inorganic polymeric new materials", J. Therm. Anal., 37(8), 1633-1656.
Davidovits, J. (1994), "High alkali cements for 21st century concretes in concrete technology-past, present and future", Proceedings of the 5th Conference on Mohan Malhotra Symposium, 144, 383-397.
Deluce, J.R. and Vecchio, F.J. (2013), "Cracking behaviour of steel fiber-reinforced concrete members containing conventional reinforcement", ACI Struct. J., 110(3), 481-490.
Desayi, P. and Ganesan, N. (1985), "An investigation on spacing of cracks and maximum crack width in reinforced concrete flexural members", Mater. Struct., 18(104), 123-133.
Dias, D.P. (2005), "Fracture toughness of geopolymeric concretes reinforced with basalt fibers", Cement Concrete Compos., 27(1), 49-54.
Duxson, P., Fernandez, J.A., Provis, J.L., Lukey, G.C., Palomo, A. and Van Deventer, J.S.J. (2007), "Geopolymer technology the current state of the art", J. Mater. Sci., 42(9), 2917-2933.
Fantilli, A.P., Mihashi, H. and Vallini, P. (2009), "Multiple cracking and strain hardening in fiber-reinforced concrete under uniaxial tension", Cement Concrete Res., 39(12), 1217-1229.
Fernandez, J.A., Palomo, A. and Lopez, H.C. (2006), "Engineering properties of alkali activated fly ash concrete", ACI Mater. J., 103(2), 106-112.
Fields, K. and Bischoff, P.H. (2004), "Tension stiffening and cracking of high-strength reinforced concrete tension members", ACI Struct. J., 101(4), 447-456.
Ganesan, N. and Shivananda, K.P. (1997), "Prediction of spacing and maximum width of crack in steel fibre reinforced concrete flexural members", J. Struct. Eng., 24(3), 143-148.
Ganesan, N., Indira, P.V. and Santhakumar, A. (2014), "Influence of steel fibers on tension stiffening and cracking of reinforced geopolymer concrete", Mag. Concrete Res., 66(6), 268-276.
Hardjito, D. and Rangan, B.V. (2005), "Developments and properties of low calcium fly ash based geopolymer concrete", Ph.D. Dissertation, Curtin University of Technology, Perth, Australia.
Hardjito, D., Wallah, S.E., Sumajouw, M.D.J. and Rangan, B.V. (2004), "On the development of fly ashbased geopolymer concrete", ACI Mater. J., 101(6), 467-472.
Islam, A., Alengaram, U.J., Jumaat, M.Z. and Bashar, I.I. (2014), "The development of compressive strength of ground granulated blast furnace slag-palm oil fuel ash-fly ash based geopolymer mortar", Mater. Des., 56, 833-841.
Li, W. and Xu, J. (2009), "Impact mechanical properties of basalt fiber reinforced geopolymeric concrete under impact loading", Mater. Sci. Eng., 505(1), 178-186.
Mazaheripour, H., Barros, J.A. and Sena-Curz, J. (2016), "Tension stiffening model for FRC reinforced by hybrid FRP and steel bars", Compos. Part B: Eng., 88, 162-181.
McCaffrey, R. (2002), "Climate change and the cement industry", Glob. Cement Lime Mag., 15-19.
Mehta, P.K. (2001), "Reducing the environmental impact of concrete", Concrete, 23(10), 61-66.
Mustafa Al Bakri, A.M., Kamarudin, H., Bnhussain, M., Rafiza, A.R. and Zarina, Y. (2012), "Effect of $Na_2SiO_3/NaOH$ ratios and NaOH molarities on compressive strength of fly-ash-based geopolymer", ACI Mater. J., 1(3), 241-252.
Ganesan, N., Indira, P.V. and Sabeena, M.V. (2013), "Tension stiffening and cracking of hybrid fibre reinforced concrete", ACI Mater. J., 110(6), 715-721.
Neville, A.M. (1995), Properties of Concrete, 4th Edition, Longman, London, U.K.
Ng, T.S., Amin, A. and Foster, S.J. (2013), "The behaviour of steel-fibrereinforced geopolymer concrete beams in shear", Mag. Concrete Res., 65(5), 308-318.
Pradip, N. and Sarker, P. (2014), "Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition", Constr. Build. Mater., 66, 163-171.
Qian, C. and Stroeven, P. (2000), "Fracture properties of concrete reinforced with steel-basalt hybrid fibers", Cement Concrete Compos., 22(5), 343-351.
Rangan, B.V. (2008), "Mix design and production of fly ash based geopolymer concrete", Ind. Concrete J., 82(5), 7-15.
Rashad, A.M., Bai, Y., Basheer, P.A.M., Milestone, N.B. and Collier, N.C. (2013), "Hydration and properties of sodium sulfate activated slag", Cement Concrete Compos., 37(1), 20-29.
Roy, D.M. and Idorn, G.M. (1982), "Hydration, structure, and properties of blast-furnace slag cements, mortars, and concrete", J. Am. Concrete Inst., 79(6), 444-457.
Vanchai, S., Ampol, W. and Chindaprasirt, P. (2013), "Properties of pervious geopolymer concrete using recycled aggregates", Constr. Build. Mater., 42, 33-39.
Vilanova, I., Torres, L., Baena, M., Kaklauskas, G. and Gribniak, V. (2014) "Experimental study of tension stiffening in GFRP RC tensile members under sustained load", Eng. Struct., 79, 390-400.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.