$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Investigating the effect of strength on the LCPC abrasivity of igneous rocks

Geomechanics & engineering, v.15 no.2, 2018년, pp.805 - 810  

Kahraman, Sair (Mining Engineering Department, Hacettepe University) ,  Fener, Mustafa (Geological Engineering Department, Ankara University) ,  Kasling, Heiko (Engineering Geology Department, Technische Universitat Munchen) ,  Thuro, Kurosch (Engineering Geology Department, Technische Universitat Munchen)

Abstract ▼ AI-Helper 아이콘AI-Helper

The abrasivity of rocks results in tool wear in rock excavation or drilling projects. It can affect significantly the cost and schedule of the projects performed in abrasive rock massess. For this reason, the understanding of the mechanism of rock abrasivity is very important for excavation projects...

주제어

#LCPC abrasivity   #igneous rocks   #rock strength  

참고문헌 (29)

  1. Abu Bakar, M.Z.A., Iqbal, M.M., Majeed, Y., Zahoor, M.K. and Fowell, R.J. (2014), "Reduced propeller speed effects on LCPC rock abrasivity test", Pakistan J. Sci., 66(1), 25-28. 

  2. Atkinson, T., Cassapi, V., Singh, R.N. (1986), "Assessment of abrasive wear resistance potential in rock excavation machinery", J. Min. Geol. Eng., 4(2), 151-163. 

    상세보기 crossref

  3. Buchi, E., Mathier, J.F. and Wyss, C. (1995), "Rock abrasivity-A significant cost factor for mechanical tunnelling in loose and hard rock", Tunnel, 5(95), 38-44. 

  4. Cheshomi, A. and Moradhaseli, S. (2017), "Effect of petrographic characteristics on abrasive properties of granitic building stones", Q. J. Eng. Geol. Hydrogeol., 50(3), 347-353. 

    상세보기 crossref

  5. Drucker, P. (2011), "Validity of the LCPC abrasivity coefficient through the example of a recent Danube gravel", Geomech. Tunn., 4(6), 681-691. 

    상세보기 crossref

  6. Dullmann, J., Alber, M. and Plinninger, R.J. (2014), "Determining soil abrasiveness by use of index tests versus using intrinsic soil parameters", Geomech. Tunn., 7(1), 87-97. 

    상세보기 crossref

  7. Er, S. and Tugrul, A. (2016), "Correlation of physico-mechanical properties of granitic rocks with Cerchar Abrasivity Index in Turkey", Measurement, 91, 114-123. 

    상세보기 crossref

  8. Fowell, R.J. and Abu Bakar, M.Z.A. (2007), "A review of the Cerchar and LCPC rock abrasivity measurement methods", Proceedings of the 11th Congress of the International Society for Rock Mechanics, Lisbon, Portugal, July. 

  9. Hashemnejad, H., Ghafoori, M., Lashkaripour, G.R., and Azali, S.T. (2012), "Effect of geological parameters on soil abrasivity using LCPC machine for predicting LAC", J. Emerg. Technol. Adv. Eng., 2, 71-76. 

  10. Hassanpour, J., Rostami, J., Tarigh Azali, S. and Zhao, J. (2014), "Introduction of an empirical TBM cutter wear prediction model for pyroclastic and mafic igneous rocks: A case history of Karaj water conveyance tunnel, Iran", Tunn. Undergr. Sp. Technol., 43, 222-231. 

    상세보기 crossref

  11. ISRM (2007), The Complete ISRM Suggested Methods for Rock Characterization, Testing and Monitoring: 1974-2006. International Society for Rock Mechanics, Compilation Arranged by the ISRM Turkish National Group, Kozan Ofset, Ankara, Turkey. 

  12. Kahraman, S., Fener, M., Kasling, H. and Thuro, K. (2016), "The influences of textural parameters of grains on the LCPC abrasivity of coarse-grained igneous rocks", Tunn. Undergr. Sp. Technol., 58, 216-223. 

    상세보기 crossref

  13. Kasling, H. and Thuro, K. (2010a), "Determining rock abrasivity in the laboratory", Proceedings of the European Rock Mechanics Symposium (EUROCK 2010), Lausanne, Switzerland, June. 

  14. Kasling, H. and Thuro, K. (2010b), "Determining abrasivity of rock and soil in the laboratory", Proceedings of the 11th International Association of Engineering Geology Conference, Auckland, New Zealand, September. 

  15. Ko, T.Y., Kim, T.K., Son, Y. and Jeon, S. (2016), "Effect of geomechanical properties on Cerchar Abrasivity Index (CAI) and its application to TBM tunneling", Tunn. Undergr. Sp. Technol., 57, 99-111. 

    상세보기 crossref

  16. Kohler, M., Maidl, U., Martak, L. (2011), "Abrasiveness and tool wear in shield tunnelling in soil", Geomech. Tunn., 4(1), 36-54. 

    상세보기 crossref

  17. Lee, S., Jeong, H.Y. and Jeon, S. (2013), "Assessment of TBM cutter wear using Cerchar abrasiveness test", Proceedings of the World Tunnel Congress 2013, Geneva, Switzerland, May-June. 

  18. Mathier, J.F. and Gisiger, J.P. (2003), "Abrasivity of Icelandic basalts", Proceedings of the 10th ISRM Conference: Technology Roadmap for Rock Mechanics, Sandton, South Africa, September. 

  19. Moradizadeh, M., Cheshomi, A., Ghafoori, M. and Trigh Azali, S. (2016), "Correlation of equivalent quartz content, Slake durability index and Is50 with Cerchar abrasiveness index for different types of rock", J. Rock Mech. Min. Sci., 86, 42-47. 

  20. Nilsen, B., Dahl, F., Holzhauser, J. and Raleigh, P. (2006), "Abrasivity of soils in TBM tunneling", Tunn.Tunn., 36-38. 

  21. Nilsen, B., Dahl, F., Holzhauser, J. and Raleigh, P. (2007), "New test methodology for estimating the abrasiveness of soils for TBM tunneling", Proceedings of the Rapid Excavation and Tunneling Conference (RETC), Toronto, Canada, June. 

  22. Normalisation Francaise P18-579 (1990), Granulats: Essaid'abrasiviteet de Broyabilite, AFNOR Association Francaise de Normalisation, Paris, France. 

  23. Plinninger, R., Kasling, H., Thuro, K. and Spaun, G. (2003), "Testing conditions and geomechanical properties influencing the CERCHAR abrasiveness index (CAI) value", J. Rock Mech. Min. Sci., 40(2), 259-263. 

    상세보기 crossref

  24. Plinninger, R.J., Spaun, G., Thuro, K. (2002), "Prediction and classification of tool wear in drill and blast tunneling", Proceedings of the 9th Congress of the International Association for Engineering Geology and the Environment, Durban, South Africa, September. 

  25. Rostami, J. (2016), "Performance prediction of hard rock Tunnel Boring Machines (TBMs) in difficult ground", Tunn. Undergr. Sp. Technol., 57, 173-182. 

    상세보기 crossref

  26. Thuro, K., Singer, J., Kasling, H. and Bauer, M. (2007), "Determining abrasivity with the LCPC test", Proceedings of the 1st Canada-U.S. Rock Mechanics Symposium, Vancouver, Canada, May. 

  27. Verhoef, P.N.W. (1997), Wear of Rock Cutting Tools, in Implications for the Site Investigation of, CRC Press, London, U.K. 

  28. West, G. (1989), "Rock abrasiveness testing for tunneling", J. Rock Mech. Min. Sci. Geomech. Abstr., 26(2), 151-160. 

    상세보기 crossref

  29. Yarali, O., Yasar, E., Bacak, G. and Ranjith, P.G. (2008), "A study of rock abrasivity and tool wear in coal measures rocks", J. Coal Geol., 74(1), 53-66. 

    상세보기 crossref

관련 콘텐츠

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로