최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국기계가공학회지 = Journal of the Korean Society of Manufacturing Process Engineers, v.17 no.3, 2018년, pp.102 - 108
박상규 (조선대학교 첨단소재공학과) , 김정석 (조선대학교 재료공학과)
The objective of this study is to develop the mechanical properties of an AlSiCu aluminum alloy using the two-step solution heat treatment. The microstructure of the gravity casting specimen represents a typical dendrite structure with a secondary dendrite arm spacing (SDAS) of 40 um. In addition to...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
Al-Si계 합금에 Cu를 첨가하면 어떠한 특성이 있고 어디에 사용되는가? | Al-Si계 합금은 주조용 합금으로 널리 사용되고 있으며 Cu의 첨가로 유동성과 주조성이 우수하여 엔진 블럭 실린더헤드 피스톤 등에 사용된다 [4-10, 11-16]. Si를 첨가하는 것은 내마모성을 증가시키는 영향이 있으며 열적 팽창은 낮추고 열전달 계수를 높게 하는 영향이 있다[10,13]. | |
열처리는 무엇인가? | 열처리는 고용화 열처리와 시효 처리의 최적화를 통해 모재 합금의 기계적 성질을 높이기 Al-Si 위한 가장 중요한 공정요소이다[17,21-23]. AlSiCu 합금계에서 상의 모양 크기 그리고 차상간 거리는 제품의 기계적 열적 성질을 변화시키는 큰 원인이 된다. | |
AlSiCu 합금계의 기계적 성질을 향상시키는 방법은 무엇인가? | AlSiCu 합금계에서 상의 모양 크기 그리고 차상간 거리는 제품의 기계적 열적 성질을 변화시키는 큰 원인이 된다. 기계적 성질을 향상시키는 방법은 Si 상의 크기나 모양을 조절하는 것이다. 기계적 성질에 대한 개선으로 열처리 공정을 통해 Al2Cu 와 같은 금속간 화합물 상의 분해 구상화 조대화 분해에 의한 공정상의 형태 등의 영향 폭넓게 연구하였다[24,25]. |
Lee, S. K. and Ryu, C. W., "Characteristics of Surface Roughness in the Wire-Cut Electric Discharge Cutting Conditions of Aluminium Alloy 2024," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 11, No. 1, pp. 39-45, 2012.
Kim, H. J. and Lee, U. R., "Characteristic Evaluation of Aluminium Filler Tube of Automotive," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 9 No. 5, pp. 34-39, 2010.
Ammar, H. R., Moreau, C., Samuel, A. M., Samuel, F. H. and Doty, H. W., "Influences of alloying elements, solution treatment time and quenching media on quality indices of 413-type Al-Si casting alloys," Materials Science and Engineering: A, Vol. 489, No. 1-2, pp. 426-438, 2008.
Dobrzanski, L. A., Maniara, R. and Sokolowski, J. H., "The effect of cast Al-Si-Cu alloy solidification rate on alloy thermal characteristic," Journal of Achievements in Materials and Manufacturing Engineering, Vol. 17, No. 1-2, pp. 217-220, 2006.
Caceres, C. H., Svensson, I. L. and Taylor, J. A., "Strength-ductility behaviour of Al-Si-Cu-Mg casting alloys in T6 temper," Cast Metals Research, Vol. 15, No. 5, pp. 531-543, 2003.
Haque, M. M. and Sharif, A., "Study on wear properties of aluminium-silicon piston alloy," Materials Processing Technology, Vol. 118, No. 1-3, pp. 69-73, 2001.
Belov, N. A., Eskin, D. G. and Avxentieva, N. N., "Constituent phase diagrams of the Al-Cu-Fe- Mg-Ni-Si system and their application to the analysis of aluminium piston alloys," Acta Materialia, Vol. 53, No. 17, pp. 4709-4722, 2005.
Liu, X., Qiao, J., Wu, Y., Liu, X. and Bian, X., "EPMA analysis of calcium-rich compounds in near eutectic Al-Si alloys," Journal of alloys and compounds, Vol. 388, No. 1, pp. 83-90, 2005.
Tomida, S., Nakata, K., Shibata, S., Zenkouji, I. and Saji, S., "Improvement in wear resistance of hyper-eutectic Al-Si cast alloy by laser surface remelting," Surface and Coatings Technology, Vol. 169, pp. 468-471, 2003.
Ashtari, P., Tezuka, H. and Sato, T., "Influence of Li addition on intermetallic compound morphologies in Al-Si-Cu-Fe cast alloys," Scripta Materialia, Vol. 51, No. 1, pp. 43-46, 2004.
Liao, H., Sun, Y. and Sun, G., "Correlation between mechanical properties and amount of dendritic ${\alpha}$ -Al phase in as-cast near-eutectic Al-11.6% Si alloys modified with strontium," Materials Science and Engineering: A, Vol. 335, No. 1-2, pp. 62-66, 2002.
Lasa, L. and Rodriguez-Ibabe, J. M., "Wear behaviour of eutectic and hypereutectic Al-Si-Cu-Mg casting alloys tested against a composite brake pad," Materials Science and Engineering: A, Vol. 363, No. 1-2, pp. 193-202, 2003.
Reif, W., Dutkiewicz, J., Ciach, R., Yu, S. and Krol, J., "Effect of ageing on the evolution of precipitates in AlSiCuMg alloys," Materials Science and Engineering: A, Vol. 234, pp. 165-168, 1997.
Saheb, N., Laoui, T., Daud, A. R., Harun, M., Radiman, S. and Yahaya, R., "Influence of Ti addition on wear properties of Al-Si eutectic alloys," Wear, Vol. 249, No. 8, pp. 656-662, 2001.
Wang, G., Bian, X., Wang, W. and Zhang, J., "Influence of Cu and minor elements on solution treatment of Al-Si-Cu-Mg cast alloys," Materials Letters, Vol. 57, No. 24-25, pp. 4083-4087, 2003.
Dunn, R. and Dickert, W., "Magnesium effect on the strength of A380. 0 and 383.0 aluminum die casting alloys," Die Casting Engineer, Vol. 19, No. 2, pp. 12-20, 1975.
Tsao, L. C., Tsai, T. C., Wu, C. S. and Chuang, T. H., "Brazeability of the 6061-T6 aluminum alloy with Al-Si-20Cu-based filler metals," Materials engineering and performance, Vol. 10, No. 6, pp. 705-709, 2001.
Ouellet, P. and Samuel, F. H., "Effect of Mg on the ageing behaviour of Al-Si-Cu 319 type aluminium casting alloys," Materials Science, Vol. 34, No. 19, pp. 4671-4697, 1999.
Wang, G., Bian, X., Liu, X. and Zhang, J., "Effect of Mg on age hardening and precipitation behavior of an AlSiCuMg cast alloy," Materials science, Vol. 39, No. 7, pp. 2535-2537, 2004.
Gauthier, J., Louchez, P. R. and Samuel, F. H., "Heat treatment of 319.2 aluminium automotive alloy Part 1, Solution heat treatment," Cast Metals, Vol. 8, No. 2, pp. 91-106, 1995.
Sablonniere, H. D. L. and Samuel, F. H., "Solution heat treatment of 319 aluminium alloy containing-0.5 wt% Mg. Part 1-solidification and tensile properties," Cast Metals Research, Vol. 9, No. 4, pp. 195-211, 1996.
De la Sablonniere, H. and Samuel, F. H., "Solution heat treatment of 319 aluminium alloy containing- 0.5 wt% Mg. Part 2-microstructure-and fractography," Cast Metals Research, Vol. 9, No. 4, pp. 213-225, 1996.
Ringer, S. P. and Hono, K., "Microstructural evolution and age hardening in aluminium alloys: atom probe field-ion microscopy and transmission electron microscopy studies," Materials characterization, Vol. 44, No. 1-2, pp. 101-131, 2000.
Totten, G. E., Mackenzie, D. S. and Dekker, M., Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes, CRC Press, pp. 272- 84, 2003.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.