[논문]Failure simulation of ice beam using a fully Lagrangian particle method

Ren, Di; Park, Jong-Chun; Hwang, Sung-Chul; Jeong, Seong-Yeob; Kim, Hyun-Soo

doi:10.1016/j.ijnaoe.2019.01.001

Failure simulation of ice beam using a fully Lagrangian particle method 원문보기

International journal of naval architecture and ocean engineering, v.11 no.2, 2019년, pp.639 - 647

Ren, Di (Dept. of Naval Architecture & Ocean Engineering, Pusan National University (PNU)) , Park, Jong-Chun (Dept. of Naval Architecture & Ocean Engineering, Pusan National University (PNU)) , Hwang, Sung-Chul (Offshore Plant Research Division, Korea Research Institute of Ships and Ocean Engineering (KRISO)) , Jeong, Seong-Yeob (Ship Hydrodynamics Research Group (Ice Model Basin), Korea Research Institute of Ships and Ocean Engineering (KRISO)) , Kim, Hyun-Soo (Dept. of Naval Architecture & Ocean Engineering, Inha Technical College)

Abstract ▼ AI-Helper

A realistic numerical simulation technology using a Lagrangian Fluid-Structure Interaction (FSI) model was combined with a fracture algorithm to predict the fluid-ice-structure interaction. The failure of ice was modeled as the tensile fracture of elastic material by applying a novel FSI model based on the Moving Particle Semi-implicit (MPS) method. To verify the developed fracture algorithm, a series of numerical simulations for 3-point bending tests with an ice beam were performed and compared with the experiments carried out in an ice room. For application of the developed FSI model, a dropping water droplet hitting a cantilever ice beam was simulated with and without the fracture algorithm. The simulation showed that the effects of fracture which can occur in the process of a FSI simulation can be studied.

주제어

AI 본문요약
AI-Helper

* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.

제안 방법

A series of three-point bending experiment with an ice beam made of fresh water was conducted independently in a cold room at the Korea Maritime and Ocean University as validation of the developed fracture algorithm.
The failure of ice was modeled as fracture of elastic by applying a novel FSI model based on the Moving Particle Semi-implicit (MPS) method. The developed numerical algorithm of a fracture was validated by a comparison with the experiments in a cold room for 3-point bending tests with an ice beam. Ice failure was simulated successfully and an acceptable range of error was obtained about 7% compared to the experiments.
, 2014, 2016). To validate the developed fracture algorithm, a 3-point bending simulation with an ice beam was performed and the results were compared with the experiments carried out in a cold room. For the application of the FSI model, a dropping water droplet interacting with a cantilever ice beam was simulated with and without the fracture algorithm.

데이터처리

To validate the developed fracture algorithm, a series of numerical simulations of a 3-point bending test was performed and compared with experiments.

이론/모형

In the calculation procedure, the prediction-correction solution algorithm is introduced for fluid analysis based on the PNU-MPS method (Lee et al., 2011). First, the intermediate velocity is obtained from the viscous, coupling force, and gravity terms explicitly as follows:
A realistic numerical simulation technology using a particle-based Fluid-Structure Interaction (FSI) model combined with a fracture algorithm was developed to simulate the fluid-icestructure interaction problems. The failure of ice was modeled as fracture of elastic by applying a novel FSI model based on the Moving Particle Semi-implicit (MPS) method. The developed numerical algorithm of a fracture was validated by a comparison with the experiments in a cold room for 3-point bending tests with an ice beam.
In the present study, a realistic numerical simulation technology for predicting the fluid-ice-structure interaction has been newly developed using a particle-based FSI model, which is combined with a fracture algorithm. With respect to the failure of ice, it was modeled as the tensile fracture of elastic material by applying a novel FSI model using the Moving Particle Semi-implicit (MPS) method (Koshizuka and Oka, 1996; Khayyer and Gotoh, 2010; Hwang et al., 2014, 2016). To validate the developed fracture algorithm, a 3-point bending simulation with an ice beam was performed and the results were compared with the experiments carried out in a cold room.

참고문헌 (35)

Antoci, C., Gallati, M., Sibilla, S., 2007. Numerical simulation of fluidestructure interaction by SPH. Comput. Struct. 85 (11), 879-890.

상세보기
Abbas, S., Alizada, A., Fries, T.P., 2010. Model-independent approaches for the XFEM in fracture mechanics. Int. J. Numer. Methods Eng. 1, 0-10.
Beckmann, B., Schicktanz, K., Curbach, M., 2014. DEM Simulation of Concrete Fracture Phenomena.
Bui, H.H., Fukagawa, R., Sako, K., Ohno, S., 2008. Lagrangian meshfree particles method (SPH) for large deformation and failure flows of geomaterial using elasticeplastic soil constitutive model. Int. J. Numer. Anal. Methods GeoMech. 32 (12), 1537-1570.

상세보기
Chan, H.K.D., 1981. Creep and Fracture Simulation of Ice Using the Finite Element Method. Ph.D. McMaster University.
Dai, M., Shen, H.H., Hopkins, M.A., Ackley, S.F., 2004. Wave rafting and the equilibrium pancake ice cover thickness. J. Geophys. Res. 109, C07023.
Hansen, E.H., Loset, S., 1999. Modelling floating offshore units moored in broken ice: model description. Cold Reg. Sci. Technol. 29, 97-106.

상세보기
Hopkins, M.A., 1998. Four stages of pressure ridging. J. Geophys. Res. 103, 21883-21891.

상세보기
Hopkins, M.A., Shen, H.H., 2001. Simulation of pancake-ice dynamics in wave field. Ann. Glaciol. 33, 355-360.

상세보기
Hwang, S.C., Khayyer, A., Gotoh, H., Park, J.C., 2014. Development of a fully Lagrangian MPS-based coupled method for simulation of fluidestructure interaction problems. J. Fluid Struct. 50, 497-511.

상세보기
Hwang, S.C., Park, J.C., Gotoh, H., Khayyer, A., Kang, K.J., 2016. Numerical simulation of sloshing flows with elastic Baffles by using a particle-based fluidestructure interaction analysis method. Ocean Eng. 118, 227-241.

상세보기
Hubner, B., Walhorn, E., Dinkler, D., 2004. A monolithic approach to fluidestructure interaction using space-time finite elements. Comput. Methods Appl. Mech. Eng. 193 (23), 2087-2104.

상세보기
Ji, S., Li, Z., Li, C., Shang, J., 2013. Discrete element modeling of ice loads on ship hulls in broken ice fields. Acta Oceanol. Sin. 32 (11), 50-58.
Juvinall, R.C., Marshek, K.M., 2006. Fundamentals of Machine Component Design, vol. 83. John Wiley & Sons, New York.
Karulin, E.B., Karulina, M.M., 2011. Numerical and physical simulations ofmoored tanker behaviour. Ships Offshore Struct. 6 (3), 179-184.
Khayyer, A., Gotoh, H., 2010. A higher order Laplacian model for enhancement and stabilization of pressure calculation by the MPS method. Appl. Ocean Res. 32 (1), 124-131.

상세보기
Khayyer, A., Gotoh, H., 2011. Enhancement of stability and accuracy of the moving particle semi-implicit method. J. Comput. Phys. 230 (8), 3093-3118.

상세보기
Koshizuka, S., Oka, Y., 1996. Moving-particle semi-implicit method for fragmentation of incompressible fluid. Nucl. Sci. Eng. 123 (3), 421-434.

상세보기
Lau, M., Lawrence, K.P., Rothenburg, L., 2011. Discrete element analysis of ice loads on ships and structures. Ships Offshore Struct. 6 (3), 211-221.

상세보기
Lee, B.H., Park, J.C., Kim, M.H., Hwang, S.C., 2011. Step-by-step improvement of MPS method in simulating violent free-surface motions and impact-loads. Comput. Methods Appl. Mech. Eng. 200 (9), 1113-1125.

상세보기
Lepparanta, M., Lensu, M., Lu, Q.M., 1990. Shear flow of sea ice in the Marginal Ice Zone with collision rheology. Geophysica 25 (1-2), 57-74.
Metrikin, I., Loset, S., 2013. Nonsmooth 3D discrete element simulation of a drillship in discontinuous ice. In: Proceedings of the 22nd International Conference on Port and Ocean Engineering under Arctic Conditions. Finland, Espoo.
Morgan, D., Sarracino, R., KcKenna, R., Thijssen, J.W., 2015. Simulation of ice rubbling against conical structures using 3D DEM. In: Proceedings of the 23rd International Conference on Port and Ocean Engineering under Arctic Conditions, Trondheim, Norway.
Polojarvi, A., Tuhkuri, J., 2009. 3D discrete numerical modelling of ridge keek punch through tests. Cold Reg. Sci. Technol. 56, 18-29.

상세보기
Peixiang, H., Ziran, L., Changchun, W., 2013. An Element-free Galerkin Method for Dynamic Fracture in Functional Graded Material. In ICF10, Honolulu (USA) 2001.
Sakharov, A., Karulin, E., Marchenko, A., Karulina, M., Sodhi, D., Chistyakov, P., 2015. Failure envelope of the Brittle strength of ice in the fixed-end beam test (two scenarios). In: 23rd International Conference on Port and Ocean Engineering under Arctic Conditions, Trondheim, Norway.
Selvadurai, A.P.S., Sepehr, K., 1999. Two-dimensional discrete element simulations of ice-structure interaction. Int. J. Solid Struct. 36, 4919-4940.

상세보기
Sepehri, J., 2014. In: Application of Extended Finite Element Method (XFEM) to Simulate Hydraulic Fracture Propagation from Oriented Perforations. Ph.D. Texas Tech University.
Shen, H.H., Hibler, W.D., Lepparanta, M., 1987. The role of floe collisions in sea ice rheology. J. Geophys. Res. 92 (C10), 7085-7096.

상세보기
Sun, S., Shen, H.H., 2012. Simulation of pancake ice load on a circular cylinder in a wave and current field. Cold Reg. Sci. Technol. 78, 31-39.

상세보기
Tan, Y., Yang, D., Sheng, Y., 2009. Discrete element method (DEM) modeling of fracture and damage in the machining process of polycrystalline SiC. J. Eur. Ceram. Soc. 29 (6), 1029-1037.

상세보기
Timco, G.W., Weeks, W.F., 2010. A review of the engineering properties of sea ice. Cold Reg. Sci. Technol. 60, 107-129.

상세보기
Wang, W., Roubier, N., Puel, G., Allain, J.M., Infante, I.C., Attal, J.P., Vennat, E., 2015. A new method combining finite element analysis and digital image correlation to assess macroscopic mechanical properties of dentin. Materials 8 (2), 535-550.

상세보기
Xu, Z., Tartakovsky, A.M., Pan, W., 2012. Discrete-element model for the interaction between ocean waves and sea ice. Phys. Rev. 85, 016703.
Zhan, D., Agar, D., He, M., Spencer, D., Molyneux, D., 2010. Numerical simulation of ship maneuvering in pack ice. In: Proceedings of the ASME 2010 29th International Conference on Ocean. Offshore and Arctic Engineering, Shanghai, China. OMAE2010-21109.

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증