최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of biomedical engineering research : the official journal of the Korean Society of Medical & Biological Engineering, v.40 no.2, 2019년, pp.55 - 61
김소현 (연세대학교 의과대학 의학공학교실) , 윤진숙 (연세대학교 의과대학 안과학교실) , 유선국 (연세대학교 의과대학 의학공학교실)
Recently, various researches on materials and equipment have been actively conducted to overcome the limitations of conventional output methods due to the increase of diversity of 3D printing materials and to adopt an output method suitable for the characteristics of each material. As the range appl...
* AI 자동 식별 결과로 적합하지 않은 문장이 있을 수 있으니, 이용에 유의하시기 바랍니다.
핵심어 | 질문 | 논문에서 추출한 답변 |
---|---|---|
3D 프린팅은 무엇인가? | 3D 프린팅은 적층제조(AM, Additive Manufacturing) 또는 임의 형상 제작의 제조방식으로 3차원 모델 데이터를 활용하여 객체를 만들기 위해 소재를 적층하는 프로세스를 의미한다[1]. 3D 프린팅은 1984년 최초로 개발된 이래 관련 기술의 발전으로 다양한 분야에서 크게 성장하였으나, 활용 가능한 소재의 한계로 인해 사용 범위에 제한이 있었다[2]. | |
의안 제작에 3D 프린팅 기술을 도입했던 Fripp Design & Research의 한계점은 무엇인가? | 이들은 의안 모형에 다양한 색상의 홍채를 제작하였으며, 시간 당 150개의 의안을 만드는데 성공하여 기존 방식에 비해 비용과 제조시간을 낮추었다. 그러나 해당 연구에 사용된 수지와 잉크는 의료용으로 적합하지 않으며, 의안 모형과 홍채 이미지가 한정되어 현장 활용도 측면에서 한계점을 지니고 있다. Alam, Md Shahid, et al. | |
임상용 CT의 단점은 무엇인가? | 9 g으로 경량화할 수 있음을 시사하였다. 하지만 임상용 CT를 사용하여 스캔 하는 것은 일반인이 접근하기 어려운 방법이며, 통상 활용되는 CT(정밀도: 2.5-1.0 mm)는 휴대용 스캐너(정밀도:5-12 µm)에 비해 데이터의 품질이 낮다는 단점을 지닌다. 뿐만 아니라 상기 연구에서는 출력물의 생물학적 안전성이 평가되지 않아 활용 가능성을 검증할 수 없었다. |
ASTM Committee F42 on Additive Manufacturing Technologies, and ASTM Committee F42 on Additive Manufacturing Technologies. Subcommittee F42. 91 on Terminology. Standard terminology for additive manufacturing technologies. ASTM International, 2012.
Transparency Market Research, "3D Printing in Medical Application Market: Future Trends and Forecast," 2015.
COOPERSTEIN, I. LAYANI, M. MAGDASSI, S, "3D printing of porous structures by UV-curable O/W emulsion for fabrication of conductive objects," Journal of Materials Chemistry C, vol. 3, no. 9, pp. 2040-2022, 2015.
POSTIGLIONE, Giovanni, et al, "Conductive 3D microstructures by direct 3D printing of polymer/carbon nanotube nanocomposites via liquid deposition modelling," Composites Part A: Applied Science and Manufacturing, vol. 76, pp. 110-114, 2015.
Webb PA, "A review of rapid prototyping (RP) techniques in the medical and biomedical sector," J Med Eng Technol , vol. 24, pp. 149-153, 2000.
He Y, Xue GH, Fu JZ, "Fabrication of low cost soft tissue prostheses with the desktop 3D printer," Sci Rep, vol. 4, pp. 6973, 2014.
Schubert C, van Langeveld MC, Donoso LA, "Innovations in 3D printing: a 3D overview from optics to organs," Br J Ophthalmol, vol. 98, pp. 159-161, 2014.
Allen, Lee, and Howard E. Webster, "Modified impression method of artificial eye fitting," American journal of ophthalmology, vol. 67, no. 2, pp. 189-218, 1969.
Cain, Joseph R, "Custom ocular prosthetics," The Journal of prosthetic dentistry, vol. 48, no. 6, pp. 690-694, 1982.
Griffiths A. 26 November 2013. http://www.dezeen.com/2013/11/26/3d-printed-prosthetic-eyes/#disqus_thread, accessed on 5 Jan. 2016.
Alam, Md Shahid, et al, "An innovative method of ocular prosthesis fabrication by bio-CAD and rapid 3-D printing technology: A pilot study," Orbit, vol. 36, no. 4, pp. 223-227, 2017.
EnvisionTEC, "Advanced DLP For Superior 3D Printing," EnvisionTEC white papers, 2017.
Zhu, Feng, et al, "3D printed polymers toxicity profiling: A caution for biodevice applications," Micro+Nano Materials, Devices, and Systems, vol. 9668. International Society for Optics and Photonics, 2015.
Beckwith, Ashley L., Jeffrey T. Borenstein, and Luis Fernando Velasquez-Garcia, "Monolithic, 3D-Printed Microfluidic Platform for Recurnapitulation of Dynamic Tumor Microenvironments," Joal of Microelectromechanical Systems, vol. 27, no. 6, pp. 1009-1022, 2018.
Kortes, J., et al, "A novel digital workflow to manufacture personalized three-dimensional-printed hollow surgical obturators after maxillectomy," International journal of oral and maxillofacial surgery, vol. 47, no. 9, pp. 1214-1218, 2018.
Nagib, Riham, et al, "Dimensional Study of Impacted Maxillary Canine Replicas 3D Printed Using Two Types of Resin Materials," MATERIALE PLASTIC, vol. 55, no. 2, pp. 190-191, 2018.
Gaynor, Andrew T., et al, "Multiple-material topology optimization of compliant mechanisms created via PolyJet three-dimensional printing," Journal of Manufacturing Science and Engineering, vol. 136, no. 6, pp. 106-101, 2014.
COMPSTON, Paul; DEXTER, David, "The effect of ultraviolet (UV) light postcuring on resin hardness and interlaminar shear strength of a glass-fibre/vinylester composite," Journal of Materials Science, vol. 43, no. 14, pp. 5017-5019, 2008.
VAZ, Nuno A.; SMITH, George W.; MONTGOMERY JR, G. Paul, "A light control film composed of liquid crystal droplets dispersed in a UV-curable polymer," Molecular Crystals and Liquid Crystals, vol. 146, no. 1, pp. 1-15, 1987.
SEETON, Christopher J, "Viscosity-temperature correlation for liquids," In: STLE/ASME 2006 International Joint Tribology Conference. American Society of Mechanical Engineers, pp. 131-142, 2016.
RUEGGEBERG, F. A., et al, "Factors affecting cure at depths within light-activated resin composites," American journal of dentistry, vol. 6, no. 2, pp. 91-95, 1993.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Free Access. 출판사/학술단체 등이 허락한 무료 공개 사이트를 통해 자유로운 이용이 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.