최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.13 no.1, 2019년, pp.36 - 41
송재춘 (LG전자 HE부품개발 FD) , 한성렬 (공주대학교 금형기계공학과)
A large plastic molding requires an injection molding with a large clamping force. However, it could not be prepared in the manufacturing at any time. In order to solve the problem, the injection molding analysis study was conducted on the back cover of 55 inch LED TV. The study compared the case of...
Han, S.R., "A verification of gate balancing equation using injection molding analysis", Journal KSDME, Vol. 12, No. 3, pp. 55-59, 2018.
Kitayama, S., Tamada, K., Takano, M. and Aiba, S., "Numerical and experimental investigation on process parameters optimization in plastic injection molding for weldline reduction and clamping force minimization", Journal of Advanced Manufacturing Technology, Vol. 97, Issue 5-9, pp. 2087-2098, 2018.
Chiang, M.H., Yang, F.L., Chen, Y.N. and Yeh, Y.P., "Integrated control of clamping force and energy-saving in hydraulic injection moulding machines using decoupling fuzzy sliding-mode control", Journal of Advanced Manufacturing Technology, Vol. 27, Issue 1-2, pp. 53-62, 2005.
Hung, M.S., Nian, S.C., Chen, J.Y. and Lin, C.Y., "Influence of clamping force on tie-bar elongation, mold separation, and part dimensions in injection molding", Precision Engineering, Vol. 51, pp. 647-658, 2018.
Hyun, S.J. and Yoo, J.H., "Characteristics analysis of flex link according to mold clamping force in injection molding machine", Journal of KSPE, Vol. 32, Issue 2, pp. 165-170, 2014.
Yoo, J.H. and Jung, H.S., "Characteristics of plastic lens dimensional deviation according to injection mold clamping force", Journal of KSPE, Vol. 32, Issue 12, pp. 1081-1086, 2015.
Lim, S.H., "Injection Mold Design, Boseonggak", pp. 88-93, 2002.
Han, S.R., "Effect of flow pattern of coolant for injection mold on the deformation of injection molding", Journal of KSMPE, Vol. 14, No. 4, pp. 92-99, 2015.
Song, J.C., "A study on the optimal injection conditions according to hot runner valve gate sequential control", A Thesis for a Master, Kongju National University, Republic of Korea, 2018.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.