최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국금형공학회지 = Journal of the Korea Society of Die & Mold Engineering, v.15 no.1, 2021년, pp.1 - 7
유민지 (공주대학교 광공학 금형공학과 대학원) , 김경아 (공주대학교 금형설계공학과) , 한성렬 (공주대학교 금형설계공학과)
The position of the gate is one of the important factors for optimal injection molding. This is because inappropriate gate positions cannot fill the cavity uniformly, which can lead to defects such as contraction. In this study, CAE was performed on hot runner injection molding of the washing machin...
Han, S. R., "Improvement of deformation of plastic lens hood for camera by applying conformal cooling channel", Journal of the Korean Society of Mechanical Technology, 21(1), pp. 133-139, 2019.
Kim, K. A., Han, S. R., "A study on deformation improvement of plastic charging plug for electric car", Journal of the Korean Society of Mechanical Technology, 21(4), pp. 653-658, 2019.
Kim, J. S., "A study on the flow characteristics according to the position and number of gates in the injection of products with a combination of round and square", Domestic Master's Thesis Seoul National University of Technology, Graduate School of Industry, 2003.
Lee, H. S., Kim, Y. S., Lee, H. K. and, Yang, G. E., "Injection molding analysis of automobile front bumper fascia using CAE", Transactions of KSAE, Vol. 3, pp. 1147-1152, 2004.
Kim, J. Y., Jo, B. B., Ahn, S. Y., Kim. S, J, Kim. S. S., "Optimization of gate position of SUS 316L90° elbow hydraulic fitting powder injection molding", Spring Conference of the Korean Society of Mechanical Engineers, pp. 111-112, 2014.
Park, J. S., "A study on the optimization of gate position and number of plastic products using CAE", Domestic Master's Degree thesis Inha university School, 2004.
Cho, S. B., Park C. H., Pyo B. K., Lee B. O. and Choi, D. H., "Optimization of gate position of injection molding using microgenetic algorithm", Spring Conference of the Korean Society of Automotive Engineers, pp. 1946-1949, 2011.
Oh, H. G., "A Study on the optimization of gate position and plastic conditions of small-sized thin meat injection products using CAE", A thesis on Domestic Master's Degree in Seoul, 2003.
Nam, S. D., "A study on the utilization of injection molding design of CAE molded analysis data", Journal of the Korean Society of Die & Mold Engineering 13.3, pp. 29-34, 2019.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.