다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
대한치과보철학회지 = The journal of Korean academy of prosthodontics, v.59 no.2, 2021년, pp.248 - 260
강현구 (강릉원주대학교 치과대학 치과보철학교실 및 구강과학연구소)
AI-Helper
Cobalt-chromium alloys are used to fabricate various dental prostheses, and have advantages of low cost and excellent mechanical properties compared to other alloys. Recently, selective laser melting, which is an additive manufacturing method, has been used to overcome the disadvantages of the conve...
Tulga A. Effect of annealing procedure on the bonding of ceramic to cobalt-chromium alloys fabricated by rapid prototyping. J Prosthet Dent 2018;119:643-9.
Kim HR, Jang SH, Kim YK, Son JS, Min BK, Kim KH. Microstructures and mechanical properties of CoCr dental alloys fabricated by three CAD/CAM-based processing techniques. Materials (Basel) 2016;9:596.
Suleiman SH, Vult von Steyern P. Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered cobalt-chromium. Acta Odontol Scand 2013;71:1280-9.
Stawarczyk B, Eichberger M, Hoffmann R, Noack F, Schweiger J, Edelhoff D. A novel CAD/CAM base metal compared to conventional CoCrMo alloys: an in-vitro study of the long-term metal-ceramic bond strength. Oral Health Dent Manag 2014;13:446-52.
Hedberg YS, Qian B, Shen Z, Virtanen S, Wallinder IO. In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. Dent Mater 2014;30:525-34.
Konieczny B, Szczesio-Wlodarczyk A, Sokolowski J, Bociong K. Challenges of Co-Cr alloy additive manufacturing methods in dentistry - the current state of knowledge (systematic review). Materials (Basel) 2020;13:3524.
Takaichi A, Suyalatu, Nakamoto T, Joko N, Nomura N, Tsutsumi Y. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 2013;21:67-76.
Al Jabbari YS, Koutsoukis T, Barmpagadaki X, Zinelis S. Metallurgical and interfacial characterization of PFM Co-Cr dental alloys fabricated via casting, milling or selective laser melting. Dent Mater 2014;30:e79-88.
Koutsoukis T, Zinelis S, Eliades G, Al-Wazzan K, Rifaiy MA, Al Jabbari YS. Selective laser melting technique of Co-Cr dental alloys: a review of structure and properties and comparative analysis with other available techniques. J Prosthodont 2015;24:303-12.
Lee DH, Lee BJ, Kim SH, Lee KB. Shear bond strength of porcelain to a new millable alloy and a conventional castable alloy. J Prosthet Dent 2015;113:329-35.
Revilla-Leon M, Sadeghpour M, Ozcan M. A review of the applications of additive manufacturing technologies used to fabricate metals in implant dentistry. J Prosthodont 2020;29:579-593.
Zhou Y, Sun Q, Dong X, Li N, Shen ZJ, Zhong Y. Microstructure evolution and mechanical properties improvement of selective laser melted Co-Cr biomedical alloys during subsequent heat treatments. J Alloys Compd 2020;840:155664.
Giacchi JV, Morando CN, Fornaro O, Palacio HA. Microstructural characterization of as-cast biocompatible Co-Cr-Mo alloys. Mater Charact 2011;62:53-61.
Kaiser R, Williamson K, O'Brien C, Ramirez-Garcia S, Browne DJ. The influence of cooling conditions on grain size, secondary phase precipitates and mechanical properties of biomedical alloy specimens produced by investment casting. J Mech Behav Biomed Mater 2013;24:53-63.
Krawczyk MB, Krolikowski MA, Grochala D, Powalka B, Figiel P, Wojciechowski S. Evaluation of surface topography after face turning of CoCr alloys fabricated by casting and selective laser melting. Materials (Basel) 2020;13:2448.
Zhou Y, Li N, Yan J, Zeng Q. Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods. J Prosthet Dent 2018;120:617-23.
Lewis AJ. Radiographic evaluation of porosities in removable partial denture castings. J Prosthet Dent 1978;39:278-281.
Fischer P, Romano V, Weber HP, Karapatis NP, Boillat E, Glardon R. Sintering of commercially pure titanium powder with a Nd:YAG laser source. Acta Materialia 2003;51:1651-62.
Liu Y, Yang Y, Mai S, Wang D, Song C. Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder. Mater Des 2015;87:797-806.
Xin XZ, Chen J, Xiang N, Wei B. Surface properties and corrosion behavior of Co-Cr alloy fabricated with selective laser melting technique. Cell Biochem Biophys 2013;67:983-90.
Santos CD, Habibe AF, Simba BG, Lins JFC, Freitas BXd, Nunes CA. CoCrMo-base alloys for dental applications obtained by selective laser melting (SLM) and CAD/CAM milling. Mat Res 2020;23. https://doi.org/10.1590/1980-5373-mr-2019-0599.
Song B, Dong S, Deng S, Liao H, Coddet C. Microstructure and tensile properties of iron parts fabricated by selective laser melting. Opt Laser Technol 2014;56:451-60.
Sing SL, Huang S, Yeong WY. Effect of solution heat treatment on microstructure and mechanical properties of laser powder bed fusion produced cobalt-28chromium-6molybdenum. Mater Sci Eng A 2020;769:138511.
Meacock CG, Vilar R. Structure and properties of a biomedical Co-Cr-Mo alloy produced by laser poweder. J Laser Appl 2009;21:88-95.
Shifeng W, Shuai L, Qingsong W, Yan C, Sheng Z, Yusheng S. Effect of molten pool boundaries on the mechanical properties of selective laser melting parts. J Mater Process Technol 2014;214:2660-7.
Barucca G, Santecchia E, Majni G, Girardin E, Bassoli E, Denti L. Structural characterization of biomedical Co-Cr-Mo components produced by direct metal laser sintering. Mater Sci Eng C Mater Biol Appl 2015;48:263-9.
Qian B, Saeidi K, Kvetkova L, Lofaj F, Xiao C, Shen Z. Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting. Dent Mater 2015;31:1435-44.
Kajima Y, Takaichi A, Nakamoto T, Kimura T, Yogo Y, Ashida M, Doi H, Nomura N, Takahashi H, Hanawa T, Wakabayashi N. Fatigue strength of Co-Cr-Mo alloy clasps prepared by selective laser melting. J Mech Behav Biomed Mater 2016;59:446-58.
Takaichi A, Kajima Y, Kittikundecha N, Htat HL, Wai Cho HH, Hanawa T. Effect of heat treatment on the anisotropic microstructural and mechanical properties of Co-Cr-Mo alloys produced by selective laser melting. J Mech Behav Biomed Mater 2020;102:103496.
Seki E, Kajima Y, Takaichi A, Kittikundecha N, Cho HHW, Htat HL. Effect of heat treatment on the microstructure and fatigue strength of CoCrMo alloys fabricated by selective laser melting. Mater Lett 2019;245:53-6.
Girardin E, Barucca G, Mengucci P, Fiori F, Bassoli E, Gatto A. Biomedical Co-Cr-Mo components produced by direct metal laser sintering. Mater Today 2016;3:889-97.
Zhang M, Yang Y, Song C, Bai Y, Xiao Z. An investigation into the aging behavior of CoCrMo alloys fabricated by selective laser melting. J Alloys Compd 2018;750:878-86.
Wei W, Zhou Y, Liu W, Li N, Yan J, Li H. Microstructural characterization, mechanical properties, and corrosion resistance of dental Co-Cr-Mo-W alloys manufactured by selective laser melting. J Mater Eng Perform 2018;27:5312-20.
Averyanova M, Bertrand P, Verquin B. Manufacture of Co-Cr dental crowns and bridges by selective laser melting technology. Virtual Phys Prototyp 2011;6:179-85.
Bartlett JL, Li X. An overview of residual stresses in metal powder bed fusion. Addit Manuf 2019;27:131-49.
Tonelli L, Fortunato A, Ceschini L. CoCr alloy processed by selective laser melting (SLM): effect of laser energy density on microstructure, surface morphology, and hardness. J Manuf Process 2020;52:106-19.
Simson T, Emmel A, Dwars A, Bohm J. Residual stress measurements on AISI 316L samples manufactured by selective laser melting. Addit Manuf 2017;17:183-9.
Mugwagwa L, Dimitrov D, Matope S, Yadroitsev I. Influence of process parameters on residual stress related distortions in selective laser melting. Procedia Manuf 2018; 21:92-99.
Mengucci P, Barucca G, Gatto A, Bassoli E, Denti L, Fiori F. Effects of thermal treatments on microstructure and mechanical properties of a Co-CrMo-W biomedical alloy produced by laser sintering. J Mech Behav Biomed Mater 2016;60:106-17.
Doherty RD, Hughes DA, Humphreys FJ, Jonas JJ, Juul Jensen D, Kassner ME, King WE, McNelley TR, McQueen HJ, Rollett AD. Current issues in recrystallization: a review. Mater Sci Eng 1997;238:219-274.
Sames WJ, List FA, Pannala S, Dehoff RR, Babu SS. The metallurgy and processing science of metal additive manufacturing. Int Mater Rev 2016;61:315-60.
Kajima Y, Takaichi A, Kittikundecha N, Nakamoto T, Kimura T, Nomura N, Kawasaki A, Hanawa T, Takahashi H, Wakabayashi N. Effect of heat-treatment temperature on microstructures and mechanical properties of Co-Cr-Mo alloys fabricated by selective laser melting. Mater Sci Eng A 2018;726:21-31.
Sing SL, Huang S, Yeong WY. Effect of solution heat treatment on microstructure and mechanical properties of laser powder bedfusion produced cobalt-28chromium-6molybdenum. Mater Sci Eng A 2020;769:138511.
Kittikundecha N, Kajima Y, Takaichi A, Wai Cho HH, Htat HL, Doi H. Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment. J Mech Behav Biomed Mater 2019;98:79-89.
Wei W, Zhou Y, Sun Q, Li N, Yan J, Li H et al. Microstructures and mechanical properties of dental CoCr-Mo-W alloys fabricated by selective laser melting at different subsequent heat treatment temperatures. Metall Mater Trans A 2020;51:3205-14.
Kittikundecha N, Kajima Y, Takaichi A, Wai Cho HH, Htat HL, Doi H. Fatigue properties of removable partial denture clasps fabricated by selective laser melting followed by heat treatment. J Mech Behav Biomed Mater 2019;98:79-89.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.