참고문헌 (22)

1. Kim WS, Kim KB. Evaluation of validity of edentulous digital model for complete denture fabrication. J Dent Hyg Sci. 2015;15:393-398. 

   원문보기 상세보기

2. Kim DY, Park JY, Bae SY, Kang HW, Kim JH, Kim WC. Evaluation of fitness according to application of glass fiber reinforcement for lower jaw complete denture. J Technol Dent. 2018;40:201-207. 

3. Chae SY, Vang MS. Dimensional stability and surface morphology of various denture resins. J Korean Acad Prosthodont. 1992;30:401-410. 

4. Anadioti E, Musharbash L, Blatz MB, Papavasiliou G, Kamposiora P. 3D printed complete removable dental prostheses: a narrative review. BMC Oral Health. 2020;20:343. 

   상세보기

5. Jung Y, Lee J, Hong SJ, Noh K, Kim HS, Pae A. Fabrication of complete dentures by conventional method and CAD/CAM milling: a case report. J Korean Acad Prosthodont. 2019;57:296-303. 

   원문보기 상세보기

6. Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res. 2018;62:56-64. 

   상세보기

7. Kim DY, Kim JH. Comparison of shrinkage according to thickness of photopolymerization resin for 3D printing. J Tech Dent. 2021;43:1-5. 

   원문보기 상세보기

8. Lee BI, You SG, You SM, Kim JH. Comparison of three-dimensional adaptation as per the rinsing time of temporary crown manufactured using a digital light processing printer. J Tech Dent. 2020;42:334-340. 

   원문보기 상세보기

9. Kim DY. Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath. J Korean Acad Dent Technol. 2020;42:113-120. 

   원문보기 상세보기

10. Kim DY, Lee GY, Kang HW, Yang CS. Comparative analysis of strain according to two wavelengths of light source and constant temperature bath deposition in ultraviolet-curing resin for dental three-dimensional printing. J Tech Dent. 2020;42:208-212. 

    원문보기 상세보기

11. Unkovskiy A, Schmidt F, Beuer F, Li P, Spintzyk S, Kraemer Fernandez P. Stereolithography vs. direct light processing for rapid manufacturing of complete denture bases: an in vitro accuracy analysis. J Clin Med. 2021;10:1070. 

    상세보기

12. Kim D, Shim JS, Lee D, Shin SH, Nam NE, Park KH, et al. Effects of post-curing time on the mechanical and color properties of three-dimensional printed crown and bridge materials. Polymers (Basel). 2020;12:2762. 

    상세보기

13. Kwon Y, Cho UR. Study on the improvement of film shrinkage in UV-curing process. Polymer(Korea). 2011;35:320-324. 

14. Son CE, Choi SS. Analytical techniques for measurement of crosslink densities of rubber vulcanizates. Elastomers Compos. 2019;54:209-219. 

    원문보기 상세보기

15. Park KM. Study on shear bond strength of various composite resins to artificial denture teeth. J Korean Acad Dent Technol. 2014;36:171-177. 

    원문보기 상세보기

16. Kim DY, Lee GY, Kim JH, Yang CS. Comparative analysis of strain according to the deposition of a constant temperature water bath of a denture-base artificial tooth produced using three-dimensional printing ultraviolet-curing resin. J Tech Dent. 2020;42:202-207. 

    원문보기 상세보기

17. Shin DH, Park YM, Park SH. Correlation between UV-dose and shrinkage amounts of post-curing process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng. 2018;17:47-53. 

18. Lee BI, You SG, You SM, Kim DY, Kim JH. Evaluating the accuracy (trueness and precision) of interim crowns manufactured using digital light processing according to post-curing time: an in vitro study. J Adv Prosthodont. 2021;13:89-99. 

    원문보기 상세보기

19. Kim BS, Kim WS, Kim SM, Kim JJ, Kim JH, Park NK, et al. Complete denture technologys. Seoul: Komoonsa, 2019. 

20. Lemos CAA, Verri FR, Gomes JML, Santiago Junior JF, Moraes SLD, Pellizzer EP. Bilateral balanced occlusion compared to other occlusal schemes in complete dentures: a systematic review. J Oral Rehabil. 2018;45:344-354. 

    상세보기

21. International Organization for Standardization (ISO). ISO 12836:2015 Dentistry - digitizing devices for CAD/CAM systems for indirect dental restorations - test methods for assessing accuracy. 2nd ed. Geneva: ISO, 2015. 

22. International Organization for Standardization (ISO). ISO 5725-1:1994 - accuracy (trueness and precision) of measurement methods and results - part 1: general principles and definitions. Geneva: ISO, 1994.