참고문헌 (17)

1. Yang HJ, Jang BS, Chung DJ, Heo SJ, Han DH, Shim JS, et al. The effects of denture cleansers and disinfectants on the color, surface hardness, surface roughness of denture base resins. J Korean Acad Prosthodont. 2001;39:105-113. 

2. Kim WS, Kim KB. Evaluation of validity of edentulous digital model for complete denture fabrication. J Dent Hyg Sci. 2015;15:393-398. 

   원문보기 상세보기

3. Kim DY, Lee GY. Analysis of deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a DLP printer. J Tech Dent. 2021;43:48-55. 

   원문보기 상세보기

4. Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res. 2018;62:56-64. 

   상세보기

5. Jin SJ, Kim DY, Kim JH, Kim WC. Accuracy of dental replica models using photopolymer materials in additive manufacturing: in vitro three-dimensional evaluation. J Prosthodont. 2019;28:e557-e562. 

   상세보기

6. Jung Y, Lee J, Hong SJ, Noh K, Kim HS, Pae A. Fabrication of complete dentures by conventional method and CAD/CAM milling: a case report. J Korean Acad Prosthodont. 2019;57:296-303. 

   원문보기 상세보기

7. Lee SJ, Jeong IH, Kim BS, Park YD, Lee DG, Park JY, et al. Oral health and self-management recognition of patients with dentures and subjective work ability effect of denture satisfaction. J Korean Acad Dent Technol. 2013;35:367-376. 

   원문보기 상세보기

8. Namgoong JY, Bae KH, Yu JS, Jang YS. Advanced application of 1,2-indanedione for latent fingerprint development on thermal paper. J Korea Contents Assoc. 2014;14:964-971. 

   원문보기 상세보기

9. Narahara H, Tanaka F, Kishinami T, Igarashi S, Saito K. Reaction heat effect on initial linear shrinkage of stereo-lithography resins. Rapid Prototyp J. 1999;5:120-128. 

   상세보기

10. Cho HG, Moon BY. Study on the changes of ophthalmic plastic lens due to heating. J Korean Ophthalmic Opt Soc. 2011;16:247-253. 

11. Park GC, Yu ST. UV generation technology using carbon nanotube-based electron beam. KIDS. 2020;21:13-19. 

12. Kim DY, Lee GY, Kang HW, Yang CS. Comparative analysis of strain according to two wavelengths of light source and constant temperature bath deposition in ultravioletcuring resin for dental three-dimensional printing. J Tech Dent. 2020;42:208-212. 

    원문보기 상세보기

13. Park DK, Chang IT, Kim KN. A study on the dimensional changes of heat curing acrylic resins using holographic interferometry. J Korean Acad Prosthodont. 1995;33:48-74. 

14. Chae SY, Vang MS. Dimensional stability and surface morphology of various denture resins. J Korean Acad Prosthodont. 1992;30:401-410. 

15. Lemos CAA, Verri FR, Gomes JML, Santiago Junior JF, Moraes SLD, Pellizzer EP. Bilateral balanced occlusion compared to other occlusal schemes in complete dentures: a systematic review. J Oral Rehabil. 2018;45:344-354. 

    상세보기

16. Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques. J Prosthet Dent. 2016;116:249-256. 

    상세보기

17. Park JY, Kim DY, Kim WS, Lee GY, Jeong ID, Bae SY, et al. Three-dimensional analysis of artificial teeth position according to three type complete mandibular denture before and after polymerization. J Korean Acad Dent Technol. 2018;40:217-224.