최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of technologic dentistry : JTD, v.43 no.3, 2021년, pp.84 - 92
김동연 (폴드 치과기공소) , 이광영 (원광보건대학교 치기공과)
Purpose: The purpose of this study was to compare the dimension safety evaluation between a general ultrasonic cleaner and an ultrasonic cleaner equipped with UV-C (ultraviolet-C). Methods: An edentulous model was prepared. A denture base and an occlusal rim were fabricated, and scanning was perform...
Yang HJ, Jang BS, Chung DJ, Heo SJ, Han DH, Shim JS, et al. The effects of denture cleansers and disinfectants on the color, surface hardness, surface roughness of denture base resins. J Korean Acad Prosthodont. 2001;39:105-113.
Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res. 2018;62:56-64.
Jin SJ, Kim DY, Kim JH, Kim WC. Accuracy of dental replica models using photopolymer materials in additive manufacturing: in vitro three-dimensional evaluation. J Prosthodont. 2019;28:e557-e562.
Narahara H, Tanaka F, Kishinami T, Igarashi S, Saito K. Reaction heat effect on initial linear shrinkage of stereo-lithography resins. Rapid Prototyp J. 1999;5:120-128.
Cho HG, Moon BY. Study on the changes of ophthalmic plastic lens due to heating. J Korean Ophthalmic Opt Soc. 2011;16:247-253.
Park GC, Yu ST. UV generation technology using carbon nanotube-based electron beam. KIDS. 2020;21:13-19.
Park DK, Chang IT, Kim KN. A study on the dimensional changes of heat curing acrylic resins using holographic interferometry. J Korean Acad Prosthodont. 1995;33:48-74.
Chae SY, Vang MS. Dimensional stability and surface morphology of various denture resins. J Korean Acad Prosthodont. 1992;30:401-410.
Lemos CAA, Verri FR, Gomes JML, Santiago Junior JF, Moraes SLD, Pellizzer EP. Bilateral balanced occlusion compared to other occlusal schemes in complete dentures: a systematic review. J Oral Rehabil. 2018;45:344-354.
Goodacre BJ, Goodacre CJ, Baba NZ, Kattadiyil MT. Comparison of denture base adaptation between CAD-CAM and conventional fabrication techniques. J Prosthet Dent. 2016;116:249-256.
Park JY, Kim DY, Kim WS, Lee GY, Jeong ID, Bae SY, et al. Three-dimensional analysis of artificial teeth position according to three type complete mandibular denture before and after polymerization. J Korean Acad Dent Technol. 2018;40:217-224.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.