$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

BIM-COBie를 활용한 교량 상부구조의 손상정보 관리 방법
A Method for Information Management of Defects in Bridge Superstructure Using BIM-COBie 원문보기

KSCE Journal of Civil and Environmental Engineering Research = 대한토목학회논문집, v.43 no.2, 2023년, pp.165 - 173  

이상호 (연세대학교 건설환경공학부) ,  이정빈 (연세대학교 건설환경공학부) ,  탁호균 (연세대학교 건설환경공학부) ,  이상호 (연세대학교 건설환경공학부)

초록
AI-Helper 아이콘AI-Helper

교량에 발생하는 손상에 대한 관리 및 평가는 정기적인 점검으로 작성된 보고서와 외관조사망도 및 손상물량표를 포함한 점검 및 진단자료에 기초한다. 이러한 자료 대부분은 2D 기반의 문서형식으로 작성되어 있고, 표준화된 방식으로 디지털화하기 어려워 정해진 목적 외의 활용이 쉽지 않다. 이에 본 연구에서는 점검자료를 기반으로 손상을 포함한 BIM 기반 교량모델을 구축하는 방법을 제시하고, BIM 표준을 준용하는 유지관리용 건설정보교환표준인 COBie (Construction Operations Building Information Exchange)를 사용하여 모델로부터 도출한 스프레드시트 데이터 형식의 손상정보들을 교량모델과 연계하여 관리하고 활용하는 방법을 제시하였다. 또한 전술한 방법들을 이용해 손상이 발생한 교량 상부구조 각 부위별 상태등급을 디지털 데이터 기반으로 자동화된 방법으로 평가하는 방법을 제안하였다. 본 연구에서 제안된 방법들은 PSC I형 콘크리트 교량의 상부구조를 대상으로 검증이 이루어졌으며 그 실효성이 검증되었다.

Abstract AI-Helper 아이콘AI-Helper

The data management and the evaluation of defects in the bridge are generally conducted based on inspection and diagnosis data, including the exterior damage map and defect quantity table prepared by periodic inspection. Since most of these data are written in 2D-based documents and are difficult to...

주제어

표/그림 (12)

참고문헌 (19)

  1. British Standards Institution (BSI) (2014). BS1192-4: Collaborative?Production of Information Part 4: Fulfilling employer's information exchange requirements using COBie - Code of practice. 

  2. Chan, B., Guan, H., Hou, L., Jo, J., Blumenstein, M. and Wang, J.?(2016). "Defining a conceptual framework for the integration of?modelling and advanced imaging for improving the reliability?and efficiency of bridge assessments." Journal of Civil Structural?Health Monitoring, Vol. 6, No. 4, pp. 703-714. 

  3. Chang, H., Zhao, Y., Rao, Z. and Li, Y. (2020). "Research on?intelligent operation and maintenance management of rail telescopic?regulator." In 2020 IEEE 10th International Conference on?Electronics Information and Emergency Communication?(ICEIEC), IEEE, Beijing, China, pp. 295-298. 

  4. Hosamo, H. H., Svennevig, P. R., Svidt, K., Han, D. and Nielsen, H.?K. (2022). "A digital twin predictive maintenance framework of?air handling units based on automatic fault detection and?diagnostics." Energy and Buildings, Vol. 261, 111988.? 

  5. International Organization for Standardization (ISO) (2014). ISO?15686-4: Buildings and Constructed Assets - Service life planning -?Part 4: Service life planning using BIM. 

  6. Isailovic, D., Stojanovic, V., Trapp, M., Richter, R., Hajdin, R. and?Dollner, J. (2020). "Bridge damage: Detection, IFC-based semantic?enrichment and visualization." Automation in Construction, Vol.?112, 103088. 

  7. Kaewunruen, S., Sresakoolchai, J., Ma, W. and Phil-Ebosie, O.?(2021). "Digital twin aided vulnerability assessment and riskbased maintenance planning of bridge infrastructures exposed to?extreme conditions." Sustainability, Vol. 13, No. 4, 2051. 

  8. Kim, J. S. (2020). Extract mouse click coordinate values from an?image, Available at: https://gaussian37.github.io/vision-opencvcoordinate_extraction/ (Accessed: February 10, 2020) (in Korean). 

  9. Korea Authority of Land and Infrastructure Safety (KALIS) (2021).?BIM Technology application manual for structural safety?maintenance of buildings (in Korean). 

  10. Korea Infrastructure Safety and Technology Corporation (KISTEC)?(2019). Guideline of safety and maintenance of facility (Safety?inspection and diagnosis) (in Korean). 

  11. Lee, J. B. (2022). IFC BIM-based optimized information model?construction for damage condition assessment of cable bridges,?MS. Thesis, University of Yonsei, Seoul, Korea. 

  12. Lu, R. and Brilakis, I. (2019). "Digital twinning of existing reinforced?concrete bridges from labelled point clusters." Automation in?Construction, Vol. 105, 102837. 

  13. Marzouk, M. and Abdelaty, A. (2012). "Maintaining subways?infrastructures using BIM." In Construction Research Congress?2012: Construction Challenges in a Flat World, West Lafayette,?Indiana, United States, pp. 2320-2328. 

  14. McGuire, B., Atadero, R., Clevenger, C. and Ozbek, M. (2016).?"Bridge information modelling for inspection and evaluation."?Journal of Bridge Engineering, Vol. 21, No. 4, 04015076. 

  15. Ministry of Land Infrastructure and Transport (MOLIT) (2020).?Report on the status of road bridges and tunnels (in Korean). 

  16. Ministry of Land Infrastructure and Transport (MOLIT) (2022).?Implementation guidelines for BIM in construction industry (in Korean). 

  17. Sacks, R., Kedar, A., Borrmann, A., Ma, L., Brilakis, I., Huhwohl,?P., Simon, D., Uri, K., Raz, Y., Thomas, L., Burcu, E. B. and?Sergej, M. (2018). "SeeBridge as next generation bridge inspection:?overview, information delivery manual and model view definition."?Automation in Construction, Vol. 90, pp. 134-145. 

  18. Shin, S. Y., Moon, H. S. and Shin, J. Y. (2022). "BIM-Based maintenance?data processing mechanism through COBie standard development?for port facility." Applied Sciences, Vol. 12, No. 3, 1304. 

  19. Xu, Y. and Turkan, Y. (2019). "BrIM and UAS for bridge inspections?and management." Engineering, Construction and Architectural?Management, Vol. 27, No. 3, pp. 785-807. 

저자의 다른 논문 :

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로