[논문]3D 프린팅 보호대 개발을 위한 재료와 구조에 따른 열전달 평가

이옥경; 김소영; 이예진; 이희란

doi:10.5805/sfti.2023.25.4.497

3D 프린팅 보호대 개발을 위한 재료와 구조에 따른 열전달 평가
Heat Transfer Depending on 3D Printing Material and Shape for Protector Development 원문보기

Fashion & textile research journal = 한국의류산업학회지, v.25 no.4, 2023년, pp.497 - 507

이옥경 (충남대학교 생활과학연구소) , 김소영 (금오공과대학교 신소재연구소) , 이예진 (충남대학교 의류학과) , 이희란 (금오공과대학교 소재디자인공학과)

Abstract ▼ AI-Helper

This study measured the effect 3D printing products comprised of different materials and shapes on heat transfer in clothing to derive fundamental data on thermal comfort among clothing comfort. The variables were three types of material (EVA foam, TPU-10%, TPU-10%+EVA), two types of shape (without holes, with holes), and two types of covers(without cover, with cover). All samples (12 types) prepared by combining these variables were placed on the hot plate set at 36℃, and the surface temperature was measured at three points for 10 minutes. The surface temperature change was dependent on the material, shape, and cover of the sample. The sample printed with TPU exhibited higher temperature transfer compared to the EVA foam sample after 10 mins. In addition, the temperature transfer was better when there were holes, and rate decreased when the sample was covered with fabric. We confirmed that material selection of the pad and thermal conductivity of the cover are extremely important in solving thermal stress to the human body caused by functional clothing with protectors. Additionally, as the protector, it is recommended to design the outer shell with a passage, such as a hole, to allow the rapid transfer of heat to the external environment.

주제어

참고문헌 (30)

Babar, A. A., Miao, D., Ali, N., Zhao, J., Wang, X., Yu, J., & Ding, B.？(2018). Breathable and colorful cellulose acetate-based nanofibrous？membranes for directional moisture transport. ACS Applied？Materials & Interfaces, 10(26), 22866-22875. doi:10.1021/acsami.8b07393

상세보기
Bates, S. R., Farrow, I. R., & Trask, R. S. (2016). 3D printed？polyurethane honeycombs for repeated tailored energy absorption.？Materials & Design, 112, 172-183. doi:10.1016/j.matdes.2016.08.062

상세보기
Eom, R. I., & Lee, Y. (2020). Comfort evaluation by wearing a gait-assistive rehabilitation robot. Journal of the Korean Society of？Clothing and Textiles, 44(6), 1107-1119. doi:10.5850/JKSCT.2020.44.6.1107

원문보기 상세보기
Fei, T., Li, Y., Liu, B., & Xia, C. (2020). Flexible polyurethane/boron？nitride composites with enhanced thermal conductivity. High？Performance Polymers, 32(3), 324-333. doi:10.1177/0954008319862044

상세보기
Han, Y., & Kim, J. (2018). A study on the mechanical properties of？knit fabric using 3D printing - Focused on PLA, TPU Filament.？Journal of Fashion Business, 22(4), 93-105. doi:10.12940/jfb.2018.22.4.93

원문보기 상세보기
Harada, T. (2001). Comfort and microclimate of clothing. Journal of？the Korean Society for Clothing Industry, 3(2), 100-104.
Hong, K. H., & Lee, H. (2020). Development of hip protectors for？snowboarding utilizing 3D modeling and 3D printing. Fashion？and Textiles, 7(1), 1-19. doi:10.1186/s40691-020-00236-3

상세보기
Jang, S. (2021, August 03). 여름철 레저 활동, 취미로 즐길 때 주의해야 할 질환은? [Diseases to watch out for during summer？leisure activities and hobbies?]. Cheonji Daily News. Retrieved？April 3, 2023, from https://www.newscj.com/news/articleView.html?idxno886479
Jeong, Y. S., Choi, H. J., Kim, K. W., Choi, G. S., Kang, J. S., & Yang,？K. S. (2009). A study on the thermal conductivity of resilient？materials. Thermochimica Acta, 490(1-2), 47-50. doi:10.1016/j.tca.2009.02.015

상세보기
Ju, J., Shi, Z., Deng, N., Liang, Y., Kang, W., & Cheng, B. (2017).？Designing waterproof breathable material with moisture？unidirectional transport characteristics based on a TPU/TBAC？tree-like and TPU nanofiber double-layer membrane fabricated by？electrospinning. RSC advances, 7(51), 32155-32163. doi:10.1039/C7RA04843B

상세보기
Jung, I., & Lee, S. (2021). Effect of surface roughness of fabrics on？tensile properties of 3D printing auxetic re-entrant pattern/textile？composites. Textile Science and Engineering, 58(4), 167-176.？doi:10.12772/TSE.2021.58.167

원문보기 상세보기
Kim, H. A., & Kim, S. J. (2017). Assessment of wicking and fast dry？properties according to moisture transport measurement method of？knit and woven fabrics for garment. Science of Emotion and？Sensibility, 20(2), 117-126. doi:10.14695/KJSOS.2017.20.2.117

원문보기 상세보기
Kim, S., Lee, O., & Lee, H. (2020). Women's comfort temperature？range and dynamic temperature change for maintaining thermal？comfort in low temperature environment. Fashion & Textile？Research Journal, 22(6), 853-861. doi:10.5805/SFTI.2020.22.6.853

원문보기 상세보기
Kim, T. G., Song, M. K., Lee, C. M., & Kwon, O. K. (2018). Thermal？comfort of the sports/leisure clothing with the heat storage/reflection function-wearing evaluation under the condition of？0x00B1; 1℃ and 50±5% RH. Fashion & Textile Research？Journal, 20(4), 474-481. doi:10.5805/SFTI.2018.20.4.474

원문보기 상세보기
Kim, T. H. (2022a, September 30). 거리두기 해제 이후 수상레저용품 수입 증가 [Increase in imports of water leisure products？after distancing is lifted]. Le Desk. Retrieved March 20, 2023,？from https://www.ledesk.co.kr/view.php?uid3115&where_kea&keyw%EA%B1%B0%EB%A6%AC%EB%91%90%EA%B8%B0%20%ED%95%B4%EC%A0%9C
Kim, C. H. (2022b, November 22). 해양레저 바로알기 1. 해양레저객이 급증하고 있다 [Getting to Know Marine Leisure 1. The？number of marine leisure visitors is rapidly increasing]. Hyeondae？Haeyang. Retrieved March 20, 2023, from http://www.hdhy.co.kr/news/articleView.html?idxno17902
Kweon, S. A., Lee, J. M., & Choi, J. M. (2003). 의복과 인체의 환경적응 [Clothing and the human body's adaptation to the？environment]. Seoul: Kyohakyungusa
Lee, H., & Hong, K. H. (2019). Survey on injuries during？snowboarding and wearing satisfaction to develop snowboard？protector. Fashion & Textile Research Journal, 21(4), 497-508.？doi:10.5805/SFTI.2019.21.4.497

원문보기 상세보기
Lee, D., & Lee, S. (2022, April 24). 팬데믹이 '야외 레저 전성시대' 열어, 야외 활동 인프라 확충돼야" ["Pandemic opens the？golden age of outdoor leisure, and outdoor activity infrastructure？needs to be expanded"]. Economy Chosun. Retrieved February 14,？2023, from https://biz.chosun.com/industry/company/2022/04/24/EVJ56UTJNBDFDEJHRGW5Q2IDI4/
Lee, S., & Park, S. (2023). Effects of relative humidity and fiber？properties on the moisture permeability of multilayer fabric？systems. Journal of the Korean Society for Clothing Industry,？25(1), 119-126. doi:10.5805/SFTI.2023.25.1.119

원문보기 상세보기
Lee, H., Eom, R. I., & Lee, Y. (2015). 3D modeling of safety leg？guards considering skin deformation and shape. Korean Journal of？Human Ecology, 24(4), 555-569. doi:10.5934/kjhe.2015.24.4.555

원문보기 상세보기
Lee, H., Eom, R. I., & Lee, Y. (2019). Evaluation of the mechanical？properties of porous thermoplastic polyurethane obtained by 3D？printing for protective gear. Advances in Materials Science and？Engineering, 2019, 1-10. doi:10.1155/2019/5838361

상세보기
Lee, H., Kim, S., Lee, Y., & Lee, O. (2022). Analysis of changes in？temperature and humidity by material combination using 3D？printing. Fashion & Textile Research Journal, 24(1), 127-137.？doi:10.5805/SFTI.2022.24.1.127

원문보기 상세보기
Milosevic, P., & Bogovic, S. (2018). 3D Technologies in individualized？chest protector modelling. Textile & Leather Review, 1(2), 46-55.？doi:10.31881/TLR.2018.vol1.iss2.p46-55.a6

상세보기
Park, J. H., & Lee, J. R. (2019). Developing fall-impact protection pad？with 3D mesh curved surface structure using 3D printing？technology. Polymers, 11(11), 1800. doi:10.3390/polym11111800

상세보기
Park, S., Lee, H., & Lee, Y. (2019). Suggestion of crotch protector？prototype for cyclewear based on 3D modeling and printing. Korean Journal of Human Ecology, 28(2), 147-157. doi:10.5850/JKSCT.2020.44.4.739

원문보기 상세보기
Shim, H. S. (2016). The evaluation of water vapor transport and？waterproofness properties of the waterproof and breathable？fabrics. The Korean Journal of Community Living Science, 27(2),？295-304. doi:10.7856/kjcls.2016.27.2.295

원문보기 상세보기
Wondu, E., Lule, Z. C., & Kim, J. (2021). Improvement of dielectric？properties and thermal conductivity of TPU with alumina-encapsulated rGO. Polymer Testing, 102, 107322. doi:10.1016/j.polymertesting.2021.107322

상세보기
Wu, S., Zeng, T., Liu, Z., Ma, G., Xiong, Z., Zuo, L., & Zhou, Z.？(2022). 3D printing technology for smart clothing - A topic？review. Materials, 15(20), 7391. doi:10.3390/ma15207391

상세보기
Zhou, Z. M., Wang, K., & Wang, Y. H. (2021). High performance of？thermoplastic polyurethane-graphene oxide self-healing composite？film. Coatings, 11(2), 128. doi:10.3390/coatings11020128

상세보기

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

3D 프린팅 보호대 개발을 위한 재료와 구조에 따른 열전달 평가
Heat Transfer Depending on 3D Printing Material and Shape for Protector Development 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (30)

이 논문을 인용한 문헌

저자의 다른 논문 :

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

3D 프린팅 보호대 개발을 위한 재료와 구조에 따른 열전달 평가 Heat Transfer Depending on 3D Printing Material and Shape for Protector Development 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (30)

이 논문을 인용한 문헌

저자의 다른 논문 :

이옥경 (10) 이예진 (66)

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

3D 프린팅 보호대 개발을 위한 재료와 구조에 따른 열전달 평가
Heat Transfer Depending on 3D Printing Material and Shape for Protector Development 원문보기