최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, v.31 no.1, 2022년, pp.70 - 76
Wi, Eun-Chan , Ko, Min-Sung , Yun, Yi-Seob , Baek, Seung-Yub , Lee, Joong-Bae , Kim, Min-Su , Jang, Sung-Min
초록이 없습니다.
Wi, E. C., Ko, M. S., Kim, H. J., Lee, J. B., Kim, M. S., Lee, J. H., Kong, J. S., Baek, S. Y., 2021, An Analysis on the Drop Impact Simulation of Dual Pump Cap Container made of Eco-friendly Materials, J. Korea Society of Die & Mold Engineering, 15:1 57-65.
Jang, Sung-Min, Baek, Seung-Yub. Effect of Gate Position on the Deformation of Injection Molds. 한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, vol.30, no.1, 85-91.
Kim, H. P., Kim, Y. J., 2001, Flow Analysis for an Effective Weld Line Control in Injection Molding, J. Korean Soc. Manuf. Technol. Eng., 10:2 64-72.
Choi, Byungjoo, Kang, Il-Jae, Jeon, Yongho, Hong, Min-Sung. Deformation Analysis for Injection Molding of Lower Stiffener in Automobile Bumper. 한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, vol.27, no.6, 564-569.
Kim, Bong Lae, Lee, Soo Hyun, Kwon, Hyuk Hong. Determination of Injection Conditions for ASTM Flexural Specimen Using Injection Molding Analysis. 한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, vol.30, no.3, 212-217.
Choi, Byungjoo, Kang, Il-Jae, Jeon, Yongho, Hong, Min-Sung. Deformation Analysis for Injection Molding of Lower Stiffener in Automobile Bumper. 한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, vol.27, no.6, 564-569.
Kim, Bong Lae, Lee, Soo Hyun, Kwon, Hyuk Hong. Determination of Injection Conditions for ASTM Flexural Specimen Using Injection Molding Analysis. 한국생산제조학회지 = Journal of the Korean Society of Manufacturing Technology Engineers, vol.30, no.3, 212-217.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.