$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Generic element formulation for modelling bolted lap joints

Mechanical systems and signal processing, v.21 no.5, 2007년, pp.2318 - 2334  

Abstract AI-Helper 아이콘AI-Helper

AbstractJoints have significant effects on the dynamic response of the assembled structures due to existence of two non-linear mechanisms in their interface, namely slipping and slapping. These mechanisms affect the structural response by adding considerable damping into the structure and lowering t...

주제어

참고문헌 (30)

  1. 10.2172/809623 D.J. Segalman, T. Paez, D. Smallwood, A. Sumali, A. Arbina, Status and integrated road-map for joints modeling research, Sandia National Laboratories, SAND2003-0897, March 2003. 

  2. American Institute of Aeronautics and Astronautics Journal Crawley 24 155 1986 10.2514/3.9236 Identification of nonlinear structural elements by force-state mapping 

  3. American Society of Mechanical Engineers, Journal of Vibration and Acoustics Ren 120 324 1998 10.1115/1.2893834 Identification of properties of nonlinear joints using dynamic test data 

  4. American Society of Mechanical Engineers, Journal of Vibration and Acoustics Ren 120 331 1998 10.1115/1.2893835 Identification of effective linear joints using coupling and joint identification techniques 

  5. Journal Sound and Vibration Ma 246 3 441 2001 10.1006/jsvi.2001.3573 Identification of bolted joints through laser vibrometry 

  6. American Society of Mechanical Engineers, Journal of Vibration and Acoustics Ferri 117 196 1995 10.1115/1.2838663 Friction damping and isolation systems 

  7. Applied Mechanics Review Gaul 54 93 2001 10.1115/1.3097294 The role of friction in mechanical joints 

  8. Journal of Sound and Vibration Ibrahim 279 3-5 857 2005 10.1016/j.jsv.2003.11.064 Uncertainties and dynamic problems of bolted joints and other fasteners 

  9. ASME Journal of Applied Mechanics Iwan 33 893 1966 10.1115/1.3625199 A distributed-element model for hysteresis and its steady-state dynamic response 

  10. Journal of Sound and Vibration Song 273 1-2 249 2004 10.1016/S0022-460X(03)00499-1 Simulation of dynamics of beam structures with bolted joints using adjusted Iwan beam elements 

  11. Acta Mechanica Gaul 125 169 1997 10.1007/BF01177306 Nonlinear dynamics of structures assembled by bolted joints 

  12. Journal of Sound and Vibration Hartwigsen 277 1-2 327 2004 10.1016/j.jsv.2003.09.018 Experimental study of non-linear effects in a typical shear lap joint configuration 

  13. International Journal for Numerical Methods in Engineering Beer 21 585 1985 10.1002/nme.1620210402 An isoparametric joint interface element for finite element analysis 

  14. International Journal for Numerical and Analytical Methods in Geomechanics Siriwardane 8 1 19 1984 10.1002/nag.1610080103 Thin-layer elements for interfaces and joints 

  15. IEEE Transactions on Automatic Control Canudas de Wit 40 419 1995 10.1109/9.376053 A new model for control of systems with friction 

  16. 10.2172/780307 D.J. Segalman, An initial overview of Iwan modeling for mechanical joints, Report SAND 2001-0811, Sandia National Laboratories, Albuquerque, NM, 2001. 

  17. Journal of Sound and Vibration Menq 107 279 1986 10.1016/0022-460X(86)90238-5 The influence of microslip on vibratory response, part I: a new microslip model 

  18. Journal of Sound and Vibration Menq 107 295 1986 10.1016/0022-460X(86)90239-7 The influence of microslip on vibratory response, part II: a comparison with experimental results 

  19. Mechanical Systems and Signal Processing Ahmadian 21 1041 2007 10.1016/j.ymssp.2005.08.015 Identification of bolted lap joints parameters in assembled structures 

  20. Ahmadian 2002 Identification of Bolted Joint Interface Models. ISMA 27 

  21. H. Ahmadian, H. Jalali, J.E. Mottershead, M.I. Friswell, Dynamic Modeling of Spot Welds using Thin Layer Interface Theory. Tenth International Congress on Sound and Vibration, Stockholm, Sweden, 2003, pp. 7-10. 

  22. Modeling and updating of large surface-to-surface joints in the AWE-MACE structure. Mechanical Systems and Signal Processing Ahmadian 20 868 2006 

  23. Mechanical Systems and Signal Processing Gladwell 9 6 601 1995 10.1006/mssp.1995.0045 Generic element matrices suitable for finite element model updating 

  24. Journal of Vibration and Acoustics Ahmadian 24 628 2002 10.1115/1.1505028 Physical realization of generic parameters in updating 

  25. American Society of Mechanical Engineering, Journal of applied Mechanics Lau 48 959 1981 10.1115/1.3157762 Amplitude incremental variational principle for nonlinear vibration of elastic systems 

  26. Computers & Structures Oldfield 84 25 2005 10.1016/j.compstruc.2005.09.007 Simplified models of bolted joints under harmonic loading 

  27. European Journal on Control Olsson 4 176 1998 10.1016/S0947-3580(98)70113-X Friction models and friction compensation 

  28. O. David, D.L. Smallwood, R.G.C. Gregory, Damping investigations of a simplified frictional shear joint, in: Proceedings of the 71st Shock and Vibration Symposium, 2000. 

  29. AIAA Journal Stavrinidis 27 9 1249 1989 10.2514/3.10252 New concepts for finite-element mass matrix formulations 

  30. Journal of Sound and Vibration Cheung 140 2 273 1990 10.1016/0022-460X(90)90528-8 Application of the incremental harmonic balance method to cubic nonlinearity systems 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트