최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Composites. Part B, Engineering, v.69, 2015년, pp.443 - 451
Firdosh, S. , Narasimha Murthy, H.N. , Pal, R. , Angadi, G. , Raghavendra, N. , Krishna, M.
This paper presents long term durability prediction of 0-5wt.% nanoclay/vinylester/glass fibre nanocomposites based on their tensile strength retention in accelerated hygrothermal ageing using Arrhenius rate model. The specimens were exposed to 30oC, 50oC and 60oC and 95% relative humidity for 75day...
Polym Compos Ghorbel 14 324 1993 10.1002/pc.750140408 Hydrothermal effects on the physico-chemical properties of pure and glass fiber reinforced polyester and vinylester resins
J Reinf Plast Compos Bank 14 559 1995 10.1177/073168449501400602 Accelerated test methods to determine the long-term behavior of FRP composite structures: environmental effects
Composites B Abanilla 37 200 2006 10.1016/j.compositesb.2005.05.016 Durability characterization of wet layup graphite/epoxy composites used in external strengthening
J Compos Constr ASCE Chen 10 279 2006 10.1061/(ASCE)1090-0268(2006)10:4(279) Durability prediction for GFRP reinforcing bars using short-term data of accelerated aging tests
Mater Des Aldajah 30 1835 2009 10.1016/j.matdes.2008.07.044 Impact of sea and tap water exposure on the durability of GFRP laminates
J Appl Polym Sci Chin 71 3 483 1999 10.1002/(SICI)1097-4628(19990118)71:3<483::AID-APP15>3.0.CO;2-S Sorption and diffusion of water, salt water, and concrete pore solution in composite matrices
J Appl Mech Roy 67 2 391 2000 10.1115/1.1304912 Anomalous moisture diffusion in viscoelastic polymers: modelling and testing
Composites Pritchard 18 3 227 1987 10.1016/0010-4361(87)90412-5 The use of water absorption kinetic data to predict laminate property changes
Compos Sci Technol Camino 57 11 1469 1997 10.1016/S0266-3538(97)00065-1 Kinetic aspects of water sorption in polyester-resin/glass-fibre composites
Composites B Karbhari 40 41 2009 10.1016/j.compositesb.2008.07.003 Hygrothermal effects on high VF pultruded unidirectional carbon/epoxy composites: moisture uptake
J Membrane Sci Picard 292 133 2007 10.1016/j.memsci.2007.01.030 Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: influence of the clay content and dispersion state. Consequences on modeling
Macromolecules Bharadwaj 34 26 9189 2001 10.1021/ma010780b Modeling the barrier properties of polymer-layered silicate nanocomposites
Open Macromol J Ratna 6 59 2012 Synthesis of vinylester-clay nanocomposites: influence of the nature of clay on mechanical, thermal, and barrier properties
Composites Part B Azeez 45 308 2013 10.1016/j.compositesb.2012.04.012 Epoxy clay nanocomposites - processing, properties and applications: a review
Composites B Goertzen 38 1 1 2007 10.1016/j.compositesb.2006.06.002 Dynamic mechanical analysis of carbon/epoxy composites for structural pipeline repair
Mater Des Sawpan 42 272 2012 10.1016/j.matdes.2012.06.008 Glass transitions of hygrothermal aged pultruded glass fibre reinforced polymer rebar by dynamic mechanical thermal analysis
Mater Sci Eng, A Zainuddina 527 3091 2010 Durability studies of nanophased FRP composites under synergistic exposure conditions
J Appl Polym Sci Miyagawa 96 281 2005 10.1002/app.21357 Mechanical properties and failure surface morphology of amine-cured epoxy/clay nanocomposites
Polym Degrad Stab Zhao 87 183 2005 10.1016/j.polymdegradstab.2004.08.005 Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites
Polym Degrad Stab Peeterbroeck 90 288 2005 10.1016/j.polymdegradstab.2005.03.023 Polymer (ethylene-co-vinyl acetate)/clay nanocomposites: effect of clay nature and organic modifiers on morphology, mechanical and thermal properties
Composites A Manfredi 39 2008 Influence of the addition of montmorillonite to the matrix of unidirectional glass fibre/epoxy composites on their mechanical and water absorption properties
Proc Chem Sharmaa 4 39 2012 10.1016/j.proche.2012.06.006 Glass fiber reinforced polymer-clay nanocomposites: processing, structure and hygrothermal effects on mechanical properties
Ciprari 2004 A thesis presented to the academic faculty, master of science in materials science and engineering
Compos Sci Technol Manjunatha 70 193 2010 10.1016/j.compscitech.2009.10.012 The tensile fatigue behavior of a silica nanoparticle-modified glass fibre reinforced epoxy composite
J Thermoplast Compos Mater Hamidi 21 141 2008 10.1177/0892705707083635 Effect of nanoclay content on void morphology in resin transfer molded composites
Compos Struct Chu 66 367 2004 10.1016/j.compstruct.2004.04.058 Durability evaluation of moderate temperature cured E-glass/vinylester systems
Composites B Karbhari 38 10 2007 10.1016/j.compositesb.2006.06.001 Design factors, reliability, and durability prediction of wet layup carbon/epoxy used in external strengthening
Measurement Yan 44 1448 2011 10.1016/j.measurement.2011.05.015 Lifetime prediction of low infrared emissivity coatings in 3wt.% NaCl solution
Compos Struct Nguyen 94 1834 2012 10.1016/j.compstruct.2012.01.004 Durability of steel/CFRP double strap joints exposed to sea water, cyclic temperature and humidity
Nucl Eng Des Zhou 241 4095 2011 10.1016/j.nucengdes.2011.08.038 Durability and service life prediction of GFRP bars embedded in concrete under acid environment
Mater Des Sun 32 4341 2011 10.1016/j.matdes.2011.04.007 Effect of temperature and cyclic hygrothermal aging on the interlaminar shear strength of carbon fiber/bismaleimide (BMI) composite
Iran Polym J Muthirakkal 19 2 89 2010 Hygrothermic behaviour of carbon/vinylester, glass/vinylester, carbon/epoxy and glass/epoxy composites
J Thermoplast Compos Mater Hamidi 21 141 2008 10.1177/0892705707083635 Effect of nanoclay content on void morphology in resin transfer molded composites
Nelson 1990 Accelerated testing-statistical models, test plans, and data analyses
Gentry TR, Bank LC, Thompson BP, Russell JS. An accelerated-test based specification for fiber reinforced plastic for structural systems. In: Proceedings of the 2nd international conference on durability of fiber reinforced polymer (FRP) compos for constr. Montreal, Canada; 2002. p. 13-24.
J Compos Constr Chen 10 4 279 2006 10.1061/(ASCE)1090-0268(2006)10:4(279) Durability prediction for GFRP bars using short-term data of accelerated aging tests
Constr Build Mater Robert 38 274 2013 10.1016/j.conbuildmat.2012.08.021 Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars
Cem Concr Compos Litherland 11 455 1981 10.1016/0008-8846(81)90117-4 The use of accelerated aging procedures to predict the long term strength of GRC composites
Composites A Ollier 48 137 2013 10.1016/j.compositesa.2013.01.005 Unsaturated polyester/bentonite nanocomposites: Influence of clay modification on final performance
Compos Struct Avila 87 55 2009 10.1016/j.compstruct.2007.12.009 Modeling nanoclay effects into laminates failure strength and porosity
Composites A Mohan 42 385 2011 10.1016/j.compositesa.2010.12.010 Water barrier properties of nanoclay filled sisal fibre reinforced epoxy composites
Mater Des Sawpan 4 272 2012 10.1016/j.matdes.2012.06.008 Glass transitions of hygrothermal aged pultruded glass fibre reinforced polymer rebar by dynamic mechanical thermal analysis
J Reinf Plast Patnaik 27 10 1093 2008 10.1177/0731684407087688 Implementation of Taguchi design for erosion of fiber reinforced polyester composite systems with SiC filler
Tribol Trans Biswas 53 520 2010 10.1080/10402000903491309 A study on tribological behavior of alumina-filled glass-epoxy composites using Taguchi experimental design
J Compos Mater Hussain 17 1511 2006 10.1177/0021998306067321 Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.